Integrated Data and Energy Communication Network: A Comprehensive Survey

OAPA In order to satisfy the power thirsty of communication devices in the imminent 5G era, wireless charging techniques have attracted much attention both from the academic and industrial communities. Although the inductive coupling and magnetic resonance based charging techniques are indeed capable of supplying energy in a wireless manner, they tend to restrict the freedom of movement. By contrast, RF signals are capable of supplying energy over distances, which are gradually inclining closer to our ultimate goal – charging anytime and anywhere. Furthermore, transmitters capable of emitting RF signals have been widely deployed, such as TV towers, cellular base stations and Wi-Fi access points. This communication infrastructure may indeed be employed also for wireless energy transfer (WET). Therefore, no extra investment in dedicated WET infrastructure is required. However, allowing RF signal based WET may impair the wireless information transfer (WIT) operating in the same spectrum. Hence, it is crucial to coordinate and balance WET and WIT for simultaneous wireless information and power transfer (SWIPT), which evolves to Integrated Data and Energy communication Networks (IDENs). To this end, a ubiquitous IDEN architecture is introduced by summarising its natural heterogeneity and by synthesising a diverse range of integrated WET and WIT scenarios. Then the inherent relationship between WET and WIT is revealed from an information theoretical perspective, which is followed by the critical appraisal of the hardware enabling techniques extracting energy from RF signals. Furthermore, the transceiver design, resource allocation and user scheduling as well as networking aspects are elaborated on. In a nutshell, this treatise can be used as a handbook for researchers and engineers, who are interested in enriching their knowledge base of IDENs and in putting this vision into practice

Resource allocation and optimization techniques in wireless relay networks

Relay techniques have the potential to enhance capacity and coverage of a wireless network. Due to rapidly increasing number of smart phone subscribers and high demand for data intensive multimedia applications, the useful radio spectrum is becoming a scarce resource. For this reason, two way relay network and cognitive radio technologies are required for better utilization of radio spectrum. Compared to the conventional one way relay network, both the uplink and the downlink can be served simultaneously using a two way relay network. Hence the effective bandwidth efficiency is considered to be one time slot per transmission. Cognitive networks are wireless networks that consist of different types of users, a primary user (PU, the primary license holder of a spectrum band) and secondary users (SU, cognitive radios that opportunistically access the PU spectrum). The secondary users can access the spectrum of the licensed user provided they do not harmfully affect to the primary user. In this thesis, various resource allocation and optimization techniques have been investigated for wireless relay and cognitive radio networks

Virtual full-duplex multiple-input multiple-output relaying in the presence of inter-relay interference

Driven by the increasing demand for wireless broadband, low latency and power-efficient networks, multiple-input multiple-output (MIMO) full-duplex relaying (FDR) schemes have gained much attention in recent years. However, the performance of FDR schemes is impaired by sophisticated self-interference suppression techniques. As such, MIMO virtual FDR (VFDR) schemes have been considered as practical alternatives to recover spectral efficiency loss in half-duplex relays (HDR) without the need for sophisticated self-interference suppression algorithms. Successive relaying (SR) scheme is one of the VFDR techniques which uses a pair of HD relays that alternate between reception and retransmission of the source information to the destination. The performance of the SR based VFDR scheme is affected by inter-relay interference (IRI) due to the concurrent transmission of the source and relay nodes. The interference in VFDR schemes is conventionally treated as a degrading factor on the information decoding receivers resulting in the design of several interference avoidance and cancellation techniques. On the contrary, this thesis developed several VFDR schemes which exploit the interference to achieve performance improvement. In this study, interference management techniques, transmit/receive beamforming matrices, power allocation and joint optimisation algorithms were developed. First, a reliable MIMO VFDR scheme in the presence of IRI was designed, where the IRI was exploited for reliability improvements. The results showed significant reliability improvement over the existing schemes. Second, a joint power allocation for MIMO VFDR schemes under network power constraint was developed. The power allocation problem in the presence of IRI was formulated based on primal-dual algorithm. The results showed that the joint optimisation algorithm can efficiently utilise the network power when compared with the conventional approach. Third, simultaneous wireless information and power transfer (SWIPT) in MIMO VFDR system was proposed, where the transmit beamforming matrices which optimise the achievable rate and harvested energy at the relays were jointly designed. The results showed that the interference energy can be harnessed to improve the SWIPT system throughput. Finally, a joint optimisation of the power split and relay position in SWIPT MIMO VFDR network were investigated. Results showed that the joint optimisation of the power split and distance factors can greatly improve the system outage performance. The analytical and numerical results in the research showed that IRI can be exploited to improve the throughput, reliability and energy harvesting of a wireless communication system. The results also showed a minimum achievable rate improvement of 80% over the HDR schemes and a reliability of 100% over the FDR schemes

Transceiver design for non-regenerative MIMO relay systems with decision feedback detection

In this paper we consider the design of zero forcing (ZF) and minimum mean square error (MMSE) transceivers for non-regenerative multiple input multiple output (MIMO) relay networks. Our designs utilise linear processors at each stage of the network along with a decision feedback detection device at the receiver. Under the assumption of full channel state information (CSI) across the entire link the processors are jointly optimised to minimise the system arithmetic mean square error (MSE) whilst meeting average power constraints at both the source and the relay terminals. We compare the presented methods to linear designs available in the literature and show the advantages of the proposed transceivers through simulation results

Multi-Step Knowledge-Aided Iterative ESPRIT for Direction Finding

In this work, we propose a subspace-based algorithm for DOA estimation which iteratively reduces the disturbance factors of the estimated data covariance matrix and incorporates prior knowledge which is gradually obtained on line. An analysis of the MSE of the reshaped data covariance matrix is carried out along with comparisons between computational complexities of the proposed and existing algorithms. Simulations focusing on closely-spaced sources, where they are uncorrelated and correlated, illustrate the improvements achieved.Comment: 7 figures. arXiv admin note: text overlap with arXiv:1703.1052

Spectral-energy efficiency trade-off of relay-aided cellular networks

Wireless communication networks are traditionally designed to operate at high spectral e ciency with less emphasis on power consumption as it is assumed that endless power supply is available through the power grid where the cells are connected to. As new generations of mobile networks exhibit decreasing gains in spectral e ciency, the mobile industry is forced to consider energy reform policies in order to sustain the economic growth of itself and other industries relying on it. Consequently, the energy e ciency of conventional direct transmission cellular networks is being examined while alternative green network architectures are also explored. The relay-aided cellular network is being considered as one of the potential network architecture for energy e cient transmission. However, relaying transmission incurs multiplexing loss due to its multi-hop protocol. This, in turn, reduces network spectral e ciency. Furthermore, interference is also expected to increase with the deployment of Relay Stations (RSs) in the network. This thesis examines the power consumption of the conventional direct transmission cellular network and contributes to the development of the relay-aided cellular network. Firstly, the power consumption of the direct transmission cellular network is investigated. While most work considered transmitter side strategies, the impact of the receiver on the Base Station (BS) total power consumption is investigated here. Both the zero-forcing and minimum mean square error weight optimisation approaches are considered for both the conventional linear and successive interference cancellation receivers. The power consumption model which includes both the radio frequency transmit power and circuit power is described. The in uence of the receiver interference cancellation techniques, the number of transceiver antennas, circuit power consumption and inter-cell interference on the BS total power consumption is investigated. Secondly, the spectral-energy e ciency trade-o in the relay-aided cellular network is investigated. The signal forwarding and interference forwarding relaying paradigms are considered with the direct transmission cellular network taken as the baseline. This investigation serves to understand the dynamics in the performance trade-o . To select a suitable balance point in the trade-o , the economic e ciency metric is proposed whereby the spectral-energy e ciency pair which maximises the economic pro tability is found. Thus, the economic e ciency metric can be utilised as an alternative means to optimise the relay-aided cellular network while taking into account the inherent spectral-energy e ciency trade-o . Finally, the method of mitigating interference in the relay-aided cellular network is demonstrated by means of the proposed relay cooperation scheme. In the proposed scheme, both joint RS decoding and independent RS decoding approaches are considered during the broadcast phase while joint relay transmission is employed in the relay phase. Two user selection schemes requiring global Channel State Information (CSI) are considered. The partial semi-orthogonal user selection method with reduced CSI requirement is then proposed. As the cooperative cost limits the practicality of cooperative schemes, the cost incurred at the cooperative links between the RSs is investigated for varying degrees of RS cooperation. The performance of the relay cooperation scheme with di erent relay frequency reuse patterns is considered as well. In a nutshell, the research presented in this thesis reveals the impact of the receiver on the BS total power consumption in direct transmission cellular networks. The relayaided cellular network is then presented as an alternative architecture for energy e cient transmission. The economic e ciency metric is proposed to maximise the economic pro tability of the relay network while taking into account the existing spectral-energy e ciency trade-o . To mitigate the interference from the RSs, the relay cooperation scheme for advanced relay-aided cellular networks is proposed