Investigations of Model-Free Sliding Mode Control Algorithms including Application to Autonomous Quadrotor Flight

Sliding mode control is a robust nonlinear control algorithm that has been used to implement tracking controllers for unmanned aircraft systems that are robust to modeling uncertainty and exogenous disturbances, thereby providing excellent performance for autonomous operation. A significant advance in the application of sliding mode control for unmanned aircraft systems would be adaptation of a model-free sliding mode control algorithm, since the most complex and time-consuming aspect of implementation of sliding mode control is the derivation of the control law with incorporation of the system model, a process required to be performed for each individual application of sliding mode control. The performance of four different model-free sliding mode control algorithms was compared in simulation using a variety of aerial system models and real-world disturbances (e.g. the effects of discretization and state estimation). The two best performing algorithms were shown to exhibit very similar behavior. These two algorithms were implemented on a quadrotor (both in simulation and using real-world hardware) and the performance was compared to a traditional PID-based controller using the same state estimation algorithm and control setup. Simulation results show the model-free sliding mode control algorithms exhibit similar performance to PID controllers without the tedious tuning process. Comparison between the two model-free sliding mode control algorithms showed very similar performance as measured by the quadratic means of tracking errors. Flight testing showed that while a model-free sliding mode control algorithm is capable of controlling realworld hardware, further characterization and significant improvements are required before it is a viable alternative to conventional control algorithms. Large tracking errors were observed for both the model-free sliding mode control and PID based flight controllers and the performance was characterized as unacceptable for most applications. The poor performance of both controllers suggests tracking errors could be attributed to errors in state estimation, which effectively introduce unknown dynamics into the feedback loop. Further testing with improved state estimation would allow for more conclusions to be drawn about the performance characteristics of the model-free sliding mode control algorithms

UAS Model Identification and Simulation to Support In-Flight Testing of Discrete Adaptive Fault-Tolerant Control Laws

In mission-critical applications of unmanned and autonomous aerial systems(UAS), it is of significant importance to develop robust strategies for fault-tolerant systems that can countermeasure system degradation and consequently support the integration into the National Airspace (NAS). This thesis research illustrates the results of systems identification that is performed using DATCOM followed by the flight test data. This data is acquired from conducting an intensive flight testings program of a fixed-wing UAS to determine the state-space model of the aircraft. A discrete state-space system is reconstructed from these models to derive Auto-Regressive Moving-Average (ARMA) models used to design a Discrete Direct and Indirect Model Reference Adaptive Control. Description of the UAS, sub-systems, and integration is presented in this thesis along with analysis of results from numerical simulation to support the design, development, and validation of adaptive control laws for fault tolerance. A set of performance metrics are defined to perform the analysis in terms of control effort, tracking performance, and reconfiguration of control laws under commonly occurring failures such as partial control surface damage, pilot-induced oscillations, and uncertain ice accretion