Convex Polyhedron Method to Stability of Continuous Systems with Two Additive Time-Varying Delay Components

This paper is concerned with delay-dependent stability for continuous systems with two additive time-varying delay components. By constructing a new class of Lyapunov functional and using a new convex polyhedron method, a new delay-dependent stability criterion is derived in terms of linear matrix inequalities. The obtained stability criterion is less conservative than some existing ones. Finally, numerical examples are given to illustrate the effectiveness of the proposed method

Stability Analysis of Uncertain Temperature control system with two additive delays and nonlinear perturbation

In this paper, the problem of robust delay-dependent stability criterion is considered for a class of linear continuous time heat exchanger system with constant additive state-delays and bounded nonlinear perturbations using Lyapunov-Krasovskii (LK) functional approach.  In the proposed delay-dependent stability analysis, the time-delays are considered to be time-invariant.  In the proposed delay-dependent stability analysis, a candidate LK functional is considered, and take the time-derivative of the functional is bounded using the Jenson integral inequality.  The proposed stability analysis finally culminates into a stability criterion in LMI framework.  The effectiveness of the proposed stability criterion is illustrated using a network controlled temperature control of heat exchanger syste

New Stabilization for Dynamical System with Two Additive Time-Varying Delays

This paper provides a new delay-dependent stabilization criterion for systems with two additive time-varying delays. The novel functional is constructed, a tighter upper bound of the derivative of the Lyapunov functional is obtained. These results have advantages over some existing ones because the combination of the delay decomposition technique and the reciprocally convex approach. Two examples are provided to demonstrate the less conservatism and effectiveness of the results in this paper

Stability analysis and stabilization of linear aperiodic sampled-data systems subject to input constraints

Motivados pelo crescente uso de controladores embarcados em diferentes aplicações, onde um protocolo de comunicação é responsável pela transmissão de dados entre algoritmos computacionais, atuadores e sensores, a análise e o controle de sistemas amostrados foram abordados em muitos trabalhos. Nesse contexto, a amostragem aperiódica pode ser vista como uma abstração matemática empregada para representar, na teoria, o efeito de imperfeições no canal de comunicação, como instabilidades, flutuações e, em alguns casos, perda de pacotes de dados. Além disso, devido a limitações físicas dos atuadores, restrições de entrada e, em particular, a saturação são onipresentes em problemas reais de controle. Essas restrições são fonte de comportamentos não-lineares e de degradação do desempenho. Em muitos casos, apenas a estabilidade local (ou regional) do sistema em malha fechada pode ser garantida na presença de restrições e não-linearidades de entrada, mesmo para plantas lineares. Este trabalho lida com sistemas lineares amostrados aperiodicamente em que a entrada de controle, sujeita a restrições (por exemplo, saturação), é calculada com base em uma realimentação de estados do sistema. Dois problemas principais são abordados. O primeiro consiste na análise de estabilidade da origem de tais sistemas com a determinação de estimativas da região de atração da origem (RAO). O segundo, por sua vez, corresponde ao projeto de controle, onde uma lei de controle de realimentação de estados é calculada para otimizar o tamanho de uma estimativa da RAO do sistema em malha fechada resultante. Os métodos propostos são baseados no uso de programação semidefinida ou linear e, portanto, podem ser facilmente aplicados na prática. Um dos métodos propostos considera uma realimentação de estados linear sujeita a saturação e funções de Lyapunov quadráticas, resultando em estimativas elipsoidais da RAO do sistema. Dois outros métodos lidam com a análise de estabilidade do sistema amostrado sujeito a saturação fornecendo estimativas poliedrais da RAO. Devido à sua flexibilidade, a adoção de poliedros em vez de elipsóides permite uma redução de conservadorismo, mas é muito exigente em termos de complexidade computacional. Motivada por esse fato, esta tese também propõe um método de projeto de controle baseado em uma estratégia alternativa, onde a complexidade dos poliedros é fixada a priori. Essa ideia resulta em um problema de otimização com restrições bilineares, onde uma lei de controle linear por partes estabilizadora de complexidade relativamente baixa é encontrada para o sistema amostrado. Os métodos mencionados acima consideram uma abordagem não-estocástica, onde limites inferior e superior são impostos para o intervalo de amostragem do sistema, o qual é desconhecido e variante no tempo. Como contribuição adicional, esta tese também considera uma abordagem estocástica. Um método de projeto de controle é proposto para a estabilização global no sentido quadrático médio do sistema amostrado, onde a lei de realimentação de estados linear é sujeita a não-linearidades que satisfazem a uma condição de setor e os intervalos de amostragem correspondem a variáveis aleatórias com a distribuição de Erlang. A possibilidade de perda de pacotes de dados também é explicitamente levada em consideração através da distribuição de Bernoulli. Além disso, o método proposto, que se baseia na teoria de processos de Markov determinísticos por partes, resulta em condições de estabilização não-conservadoras no caso linear sem restrições de entrada.Motivated by the growing use of embedded controllers in different applications, where a communication protocol is responsible for the transmission of data between computer algorithms, actuators and sensors, the analysis and control design for sampled-data control systems have been addressed in many works. In this context, aperiodic sampling can be seen as a modeling abstraction employed to represent, in a theoretical framework, the effect of imperfections on the communication channel such as sampling jitters, fluctuations and, in some cases, packet dropouts. Moreover, due to physical limitations of actuators, input constraints and, in particular, input saturation are ubiquitous in real control problems. These constraints are source of nonlinear behaviors and performance degradation. In many cases, only local (or regional) stability of the closed-loop system can be ensured in the presence of actuators constraints and nonlinearities, even for linear plants. This work deals with linear aperiodic sampled-data systems where the control input, subject to constraints (e.g. saturation), is computed based on a feedback of the system state. It focuses on two main problems. The first one regards the stability analysis of the origin of such systems, with the determination of estimates of the region of attraction of the origin (RAO). The second one, in turn, corresponds to the control design, where a state-feedback control law is computed in order to enlarge an estimate of the RAO of the resulting closed-loop system. The proposed methods are based on the use of semidefinite or linear programming and can therefore be easily applied in practice. One of the proposed methods considers a linear saturating feedback of the system state and quadratic Lyapunov functions, leading to ellipsoidal estimates of the RAO of the system. Two other methods deal with the stability analysis of the sampled-data system subject to input saturation providing polyhedral estimates of the RAO. Because of their flexibility, adopting polyhedrons instead of ellipsoids allows a reduction of conservatism, but is very demanding in terms of computational complexity. Motivated by this fact, this thesis also proposes a control design method based on an alternative strategy, where the complexity of the polytopes is fixed a priori. This idea results in an optimization problem with bilinear constraints, where a stabilizing piecewise linear control law of relatively low complexity is found for the sampled-data system. The aforementioned methods consider a non-stochastic framework, where lower and upper bounds are imposed for the unknown, time-varying sampling interval of the system. As an additional contribution, this thesis also considers a stochastic setting. A control design method is proposed for the global stabilization in the mean square sense of the sampled-data system, where the linear feedback control law is subject to sector bounded nonlinearities and the sampling intervals are assumed to be random variables with the Erlang distribution. The possibility of packet dropouts is also explicitly taken into account through the Bernoulli distribution. Moreover, the proposed approach, which is based onthe framework of Piecewise Deterministic Markov Processes, leads to non-conservative stabilization conditions in the unconstrained linear case.Motivé par l’utilisation croissante de contrôleurs embarqués dans différentes applications, où un protocole de communication est responsable par la transmission de données entre les algorithmes numériques, les actionneurs et les capteurs, l’analyse et la conception de contrôle pour les systèmes de contrôle échantillonnées ont été abordées dans de nombreux travaux. Dans ce contexte, l’échantillonnage apériodique peut être considéré comme une abstraction mathématique employée pour représenter, dans un cadre théorique, l’effet des imperfections sur le canal de communication telles que la gigue d’échantillonnage, les fluctuations et, dans certains cas, les pertes de paquets. De plus, en raison des limitations physiques des actionneurs, les contraintes d’entrée et, en particulier, la saturation des entrées sont omniprésentes dans les problèmes de contrôle réels. Ces contraintes sont une source de comportements non-linéaires et de dégradation de la performance. Dans de nombreux cas, seule la stabilité locale (ou régionale) du système en boucle fermée peut être assurée en présence de contraintes et de non-linéarités des actionneurs, même pour les systèmes linéaires. Ce travail traite des systèmes linéaires échantillonnées apériodiquement où l’entrée de commande, soumise à des contraintes (par exemple la saturation), est calculée sur la base d’un retour d’état du système. Il se concentre sur deux problèmes principaux. Le premier consiste en l’analyse de stabilité de l’origine de tels systèmes avec la détermination d’estimations de la région d’attraction de l’origine (RAO). Le deuxième, à son tour, correspond à la conception de la commande, où une loi de commande à retour d’état est calculée afin d’agrandir une estimation de la RAO du système en boucle fermée résultant. Les méthodes proposées sont basées sur la programmation semi-définie ou linéaire et peuvent donc être facilement appliquées dans la pratique. L’une des méthodes proposées considère un retour d’état linéaire soumis à la saturation et des fonctions de Lyapunov quadratiques, conduisant à des estimations ellipsoïdales de la RAO du système. Deux autres méthodes traitent de l’analyse de stabilité du système échantillonné soumis à la saturation des entrées fournissant des estimations polyédriques de la RAO. En raison de leur flexibilité, l’adoption de polyèdres au lieu d’ellipsoïdes permet une réduction du conservatisme mais est très exigeante en termes de complexité de calcul. Motivée par ce fait, cette thèse propose également une méthode de conception de contrôle basée sur une stratégie alternative, où la complexité des polyèdres est fixée a priori. Cette idée se traduit par un problème d’optimisation avec des contraintes bilinéaires, où une loi de commande linéaire par morceaux stabilisante de complexité relativement faible est trouvée pour le système échantillonné. Les méthodes mentionnées ci-dessus considèrent un cadre non stochastique, où des limites inférieure et supérieure sont imposées pour l’intervalle d’échantillonnage inconnu et variable dans le temps du système. Comme contribution supplémentaire, cette thèseconsidère également un cadre stochastique. Une méthode de conception de contrôle est proposée pour la stabilisation globale dans le sens quadratique moyen du système échantillonné, où la loi de contrôle linéaire de retour d’état est soumise à des non-linéarités délimitées par secteur et les intervalles d’échantillonnage sont supposés être des variables aléatoires avec la distribution d’Erlang. La possibilité de pertes de paquets est aussi explicitement prise en compte via la distribution de Bernoulli. De plus, l’approche proposée, qui est basée sur le cadre des processus de Markov déterministes par morceaux, conduit à des conditions de stabilisation non conservatrices dans le cas linéaire sans contraintes

Robust fault tolerant control of induction motor system

Research into fault tolerant control (FTC, a set of techniques that are developed to increase plant availability and reduce the risk of safety hazards) for induction motors is motivated by practical concerns including the need for enhanced reliability, improved maintenance operations and reduced cost. Its aim is to prevent that simple faults develop into serious failure. Although, the subject of induction motor control is well known, the main topics in the literature are concerned with scalar and vector control and structural stability. However, induction machines experience various fault scenarios and to meet the above requirements FTC strategies based on existing or more advanced control methods become desirable. Some earlier studies on FTC have addressed particular problems of 3-phase sensor current/voltage FTC, torque FTC, etc. However, the development of these methods lacks a more general understanding of the overall problem of FTC for an induction motor based on a true fault classification of possible fault types.In order to develop a more general approach to FTC for induction motors, i.e. not just designing specific control approaches for individual induction motor fault scenarios, this thesis has carried out a systematic research on induction motor systems considering the various faults that can typically be present, having either “additive” fault or “multiplicative” effects on the system dynamics, according to whether the faults are sensor or actuator (additive fault) types or component or motor faults (multiplicative fault) types.To achieve the required objectives, an active approach to FTC is used, making use of fault estimation (FE, an approach that determine the magnitude of a fault signal online) and fault compensation. This approach of FTC/FE considers an integration of the electrical and mechanical dynamics, initially using adaptive and/or sliding mode observers, Linear Parameter Varying (LPV, in which nonlinear systems are locally decomposed into several linear systems scheduled by varying parameters) and then using back-stepping control combined with observer/estimation methods for handling certain forms of nonlinearity.In conclusion, the thesis proposed an integrated research of induction motor FTC/FE with the consideration of different types of faults and different types of uncertainties, and validated the approaches through simulations and experiments

Modelling, Monitoring, Control and Optimization for Complex Industrial Processes

This reprint includes 22 research papers and an editorial, collected from the Special Issue "Modelling, Monitoring, Control and Optimization for Complex Industrial Processes", highlighting recent research advances and emerging research directions in complex industrial processes. This reprint aims to promote the research field and benefit the readers from both academic communities and industrial sectors

Contributions to nonlinear system modelling and controller synthesis via convex structures

Esta tesis discute diferentes metodologías de modelado para extraer mejores prestaciones o resultados de estabilidad que aquéllas que el modelado convencional basado en sector no-lineal de sistemas Takagi-Sugeno (también denominados cuasi-LPV) es capaz de producir. En efecto, incluso si las LMIs pueden probar distintas cotas de prestaciones o márgenes de estabilidad (tasa de decaimiento, $\mathcal H_\infty$, etc.) para sistemas politópicos, es bien conocido que las prestaciones probadas dependen del modelo elegido y, dado un sistema no-lineal, dicho modelo politópico no es único. Por tanto, se presentan exploraciones hacia cómo obtener el modelo que es menos perjudicial para la medida de prestaciones elegida. Como una última contribución, mejores resultados son obtenidos mediante la extensión del modelado politópico Takagi-Sugeno a un marco de inclusiones en diferencias cuasi-convexas con planificación de ganancia. En efecto, una versión sin planificación de ganancia fue propuesta por un equipo de investigadores de la Universidad de Sevilla (Fiaccini, Álamo, Camacho) para generalizar el modelado politópico, y esta tesis propone una version aún más general de algunos de dichos resultados que incorpora planificación de ganancia.This thesis discusses different modelling methodologies to eke out best performance/stability results than conventional sector-nonlinearity Takagi-Sugeno (also known as quasi-LPV) systems modelling techniques are able to yield. Indeed, even if LMIs can prove various performance and stability bounds (decay rate, $\mathcal H_\infty$, etc.) for polytopic systems, it is well known that the proven performance depends on the chosen model and, given a nonlinear dynamic systems, the polytopic embeddings available for it are not unique. Thus, explorations on how to obtain the model which is less deletereous for performance are presented. As a last contribution, extending the polytopic Takagi-Sugeno setup to a gain-scheduled quasi-convex difference inclusion framework allows to improve the results over the polytopic models. Indeed, the non-scheduled convex difference inclusion framework was proposed by a research team in University of Seville (Fiacchini, Alamo, Camacho) as a generalised modelling methodology which included the polytopic one; this thesis poses a further generalised gain-scheduled version of some of these results.Aquesta tesi discuteix diferents metodologies de modelatge per extreure millors prestacions o resultats d'estabilitat que aquelles que el modelatge convencional basat en sector no-lineal de sistemes Takagi-Sugeno (també anomenats quasi-LPV) és capaç de produir. En efecte, fins i tot si les LMIs poden provar diferents cotes de prestacions o marges d'estabilitat (taxa de decaïment, $\mathcal H_\infty$, etc.) per a sistemes politòpics, és ben conegut que les prestacions provades depenen del model triat i, donat un sistema no-lineal, el dit model politòpic no és únic. Per tant, es presenten exploracions cap a com obtenir el model que és menys perjudicial per a la mesura de prestacions triada. Com una darrera contribució, millors resultats són obtinguts mitjançant l'extensió del modelatge politòpic Takagi-Sugeno a un marc d'inclusions en diferències quasi-convexes amb planificació de guany. En efecte, una versió sense planificació de guany va ser proposada per un equip d'investigadors de la Universitat de Sevilla (Fiaccini, Álamo, Camacho) per a generalitzar el modelatge politòpic, i aquesta tesi proposa una versió més general d'alguns d'aquests resultats que incorpora planificació de guany.Robles Ruiz, R. (2018). Contributions to nonlinear system modelling and controller synthesis via convex structures [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/100848TESI