198 research outputs found
Bandlimited Digital Predistortion of Wideband RF Power Amplifiers
The increase in the demand for high data rates has led to the deployment of wider bandwidths and complex waveforms in wireless communication systems. Multicarrier waveforms such as orthogonal frequency division multiplexing (OFDM) employed in modern systems are very sensitive to the transmitter chain nonidealities due to their high peak-to-average-power-ratio (PAPR) characteristic. They are therefore affected by nonlinear transmitter components particularly the power amplifier (PA). Moreover, to enhance power efficiency, PAs typically operate near saturation region and hence become more nonlinear. Power efficiency is highly desirable especially in battery powered and portable devices as well as in base stations. Hence there is a clear need for efficient linearization algorthms which improve power efficiency while maintaining high spectral efficiency.
Digital predistortion (DPD) has been recognized as one of the most effective methods in mitigating PA nonlinear distortions. The method involves the application of inverse PA nonlinear function upstream of the PA such that the overall system output has a linear amplification. The computation of the nonlinearity profile and the inversion of the PA function are particularly difficult and complicated especially when involving wideband radio access waveforms, and therefore memory effects, which are being employed in modern communication systems, such as in Long Term Evolution/Advanced (LTE/LTE-A). In the recent technical literature, different approaches which focus on the linearization of specific frequency bands or sub-bands only have been developed to alleviate this problem, thereby reducing the complexity of DPD.
In this thesis, we focus on the development and characterization of a bandlimited DPD solution specifically tailored towards the linearization at and around the main carrier(s) in single carrier deployment or contiguous carrier aggregation of two or more component carriers. In terms of parameter identification, the solution is based on the reduced-complexity closed-loop decorrelation-based parameter learning principle, which is also able to track time-varying changes in the transmitter components adaptively. The proposed bandlimited solution is designed to linearize the inband and out-of-band (OOB) distortions in the immediate vicinity of the main carrier(s) while assuming the distortions more far away in the spectrum are suppressed by transmit or duplex filters. This is implemented using FIR filters to limit the bandwidth expansion during basis functions generation and to restrain the bandwidth of the feedback observation signal, thus reducing the DPD sample rates in both the main path processing and the parameter learning. The performance of the proposed bandlimited DPD solution is evaluated using comprehensive simulations involving memoryless and memory-based PA models, as well as true RF measurements using commercial LTE-A base station and mobile device PAs. The achieved results validate and demonstrate efficient suppression of inband and OOB distortions in real-world application scenarios. Furthermore, the bandlimited DPD consistently outperforms the conventional DPD solutions in the memory-based PA model and practical PA scenarios in suppressing the OOB distortion in the immediate vicinity of the main carrier(s) by approximately 1 - 2 dB. The results provide sufficient grounds for the application of the bandlimited DPD solution in the classical single carrier deployment or in contiguous carrier aggregation of two or more component carriers where conventional DPD solutions would otherwise be highly complex
Peak-to-average power ratio analysis for OFDM-based mixed-numerology transmissions
In this paper, the probability distribution of the peak to average power ratio (PAPR) is analyzed for the mixed numerologies transmission based on orthogonal frequency division multiplexing (OFDM). State of the art theoretical analysis implicitly assumes continuous and symmetric frequency spectrum of OFDM signals. Thus, it is difficult to be applied to the mixed-numerology system due to its complication. By comprehensively considering system parameters, including numerology, bandwidth and power level of each subband, we propose a generic analytical distribution function of PAPR for continuous-time signals based on level-crossing theory. The proposed approach can be applied to both conventional single numerology and mixed-numerology systems. In addition, it also ensures the validity for the noncontinuous-OFDM (NC-OFDM). Given the derived distribution expression, we further investigate the effect of power allocation between different numerologies on PAPR. Simulations are presented and show the good match of the proposed theoretical results
Improved Hybrid Blind PAPR Reduction Algorithm for OFDM Systems
The ever growing demand for high data rate communication services resulted into the development of long-term evolution (LTE) technology. LTE uses orthogonal frequency division multiplexing (OFDM) as a transmission technology in its PHY layer for down-link (DL) communications. OFDM is spectrally efficient multicarrier modulation technique ideal for high data transmissions over highly time and frequency varying channels. However, the transmitted signal in OFDM can have high peak values in the time domain due to inverse fast Fourier transform (IFFT) operation. This creates high peak-to-average power ratio (PAPR) when compared to single carrier systems. PAPR drives the power amplifiers to saturation degrading its efficiency by consuming more power. In this paper a hybrid blind PAPR reduction algorithm for OFDM systems is proposed, which is a combination of distortion technique (Clipping) and distortionless technique (DFT spreading). The DFT spreading is done prior to clipping reducing significantly the probability of having higher peaks in the composite signal prior to transmission. Simulation results show that the proposed algorithm outperforms unprocessed conventional OFDM transmission by 9 dB. Comparison with existing blind algorithms shows 7 dB improvement at error rate 10–3 and 3 dB improvement at error rate 10–1 when operating in flat fading and doubly dispersive channels, respectively.Keywords:   LTE Systems; OFDM; Peak to Average Power Ratio; DFT spreading; Signal to Noise Power Ratio
Reference Receiver Based Digital Self-Interference Cancellation in MIMO Full-Duplex Transceivers
In this paper we propose and analyze a novel self-interference cancellation
structure for in-band MIMO full-duplex transceivers. The proposed structure
utilizes reference receiver chains to obtain reference signals for digital
self-interference cancellation, which means that all the transmitter-induced
nonidealities will be included in the digital cancellation signal. To the best
of our knowledge, this type of a structure has not been discussed before in the
context of full-duplex transceivers. First, we will analyze the overall
achievable performance of the proposed cancellation scheme, while also
providing some insight into the possible bottlenecks. We also provide a
detailed formulation of the actual cancellation procedure, and perform an
analysis into the effect of the received signal of interest on
self-interference coupling channel estimation. The achieved performance of the
proposed reference receiver based digital cancellation procedure is then
assessed and verified with full waveform simulations. The analysis and waveform
simulation results show that under practical transmitter RF/analog impairment
levels, the proposed reference receiver based cancellation architecture can
provide substantially better self-interference suppression than any existing
solution, despite deploying only low-complexity linear digital processing.Comment: 7 pages, 4 figures. To be presented in the 2014 IEEE Broadband
Wireless Access Worksho
A Low-Complexity SLM PAPR Reduction Scheme for OFDMA
In orthogonal frequency division multiplexing (OFDM) systems, selected mapping (SLM) techniques are widely used to minimize the peak to average power ratio (PAPR). The candidate signals are generated in the time domain by linearly mixing the original time-domain transmitted signal with numerous cyclic shift equivalents to reduce the amount of Inverse Fast Fourier Transform (IFFT) operations in typical SLM systems. The weighting factors and number of cyclic shifts, on the other hand, should be carefully chosen to guarantee that the elements of the appropriate frequency domain phase rotation vectors are of equal magnitude. A low-complexity expression is chosen from among these options to create the proposed low-complexity scheme, which only requires one IFFT. In comparison to the existing SLM technique, the new SLM scheme achieves equivalent PAPR reduction performance with significantly less computing complexity. MATLAB tool is used for simulating the proposed work
- …