Restoration of an active MV distribution grid with a battery ESS: A real case study

In order to improve power system operation, Battery Energy Storage Systems (BESSs) have been installed in high voltage/medium voltage stations by Distribution System Operators (DSOs) around the world. Support for restoration of MV distribution networks after a blackout or HV interruption is among the possible new functionalities of BESSs. With the aim to improve quality of service, the present paper investigates whether a BESS, installed in the HV/MV substation, can improve the restoration process indicators of a distribution grid. As a case study, an actual active distribution network of e-distribuzione, the main Italian DSO, has been explored. The existing network is located in central Italy. It supplies two municipalities of approximately 10,000 inhabitants and includes renewable generation plants. Several configurations are considered, based on: the state of the grid at blackout time; the BESS state of charge; and the involvement of Dispersed Generation (DG) in the restoration process. Three restoration plans (RPs) have been defined, involving the BESS alone, or in coordination with DG. A MATLAB®/Simulink® program has been designed to simulate the restoration process in each configuration and restoration plan. The results show that the BESS improves restoration process quality indicators in different simulated configurations, allowing the operation in controlled island mode of parts of distribution grids, during interruptions or blackout conditions. The defined restoration plans set the priority and the sequence of controlled island operations of parts of the grid to ensure a safe and better restoration. In conclusion, the results demonstrate that a BESS can be a valuable element towards an improved restoration procedure

A Modelling Tool for Distribution Networks to Demonstrate Smart Grid Solutions

The increased deployment of low carbon technologies in power distribution networks, particularly at the distribution level, is expected to cause significant problems to network operation unless existing networks are appropriately adapted and actively controlled as part of a smart grid. This paper describes the development of a modelling tool to examine Smart Grid solutions to a number of issues affecting low voltage power distribution networks. Use of the tool in the context of transformer overload, line overvoltage, active load control, Grid storage and Black Start analysis is examined

Requirements to Testing of Power System Services Provided by DER Units

The present report forms the Project Deliverable ‘D 2.2’ of the DERlab NoE project, supported by the EC under Contract No. SES6-CT-518299 NoE DERlab. The present document discuss the power system services that may be provided from DER units and the related methods to test the services actually provided, both at component level and at system level

Provision of Ancillary Services with Variable Speed Wind Turbines

In recent years, the amount of wind turbines in the power system has increased tremendously. As the current wind turbines do not participate in the provision of ancillary services such as frequency control and voltage control, this may compromise the proper functioning of the electric power system. However, since the modern wind turbines are equipped with a power-electronic converter, they can assist in the provision of ancillary services. To achieve this, additional control loops have to be added to the wind turbine controller. In this paper, an overview of the different ancillary services is given. The ability to provide them with wind turbines is discussed. Since frequency and voltage control are the most important, these two services are further elaborated. It can be concluded that wind turbines are suited to provide frequency control, especially when they are operated slightly below their maximum power point. They can also assist in voltage control, while operation in the maximum power point is usually possible, so few energy is lost. These are important outcomes, since wind turbines which provide ancillary services can contribute in allowing a higher penetration of renewable energy in the power system without compromising its proper functioning

Power quality and electromagnetic compatibility: special report, session 2

The scope of Session 2 (S2) has been defined as follows by the Session Advisory Group and the Technical Committee: Power Quality (PQ), with the more general concept of electromagnetic compatibility (EMC) and with some related safety problems in electricity distribution systems. Special focus is put on voltage continuity (supply reliability, problem of outages) and voltage quality (voltage level, flicker, unbalance, harmonics). This session will also look at electromagnetic compatibility (mains frequency to 150 kHz), electromagnetic interferences and electric and magnetic fields issues. Also addressed in this session are electrical safety and immunity concerns (lightning issues, step, touch and transferred voltages). The aim of this special report is to present a synthesis of the present concerns in PQ&EMC, based on all selected papers of session 2 and related papers from other sessions, (152 papers in total). The report is divided in the following 4 blocks: Block 1: Electric and Magnetic Fields, EMC, Earthing systems Block 2: Harmonics Block 3: Voltage Variation Block 4: Power Quality Monitoring Two Round Tables will be organised: - Power quality and EMC in the Future Grid (CIGRE/CIRED WG C4.24, RT 13) - Reliability Benchmarking - why we should do it? What should be done in future? (RT 15

Overview of increasing the penetration of renewable energy sources in the distribution grid by developing control strategies and using ancillary services

Increasing the renewables energy resources in the distribution network is one of the main challenges of the distributed system operator due to instability, power quality and feeder capacity problems. This paper proposes a solution for further penetration of distributed energy resources, by developing control strategies and using ancillary services. Besides the penetration issues, the control strategies will mitigate power quality problems, voltage unbalance and will increase the immunity of the grid by provision of fault ride through capabilities

Efficient and Risk-Aware Control of Electricity Distribution Grids

This article presents an economic model predictive control (EMPC) algorithm for reducing losses and increasing the resilience of medium-voltage electricity distribution grids characterized by high penetration of renewable energy sources and possibly subject to natural or malicious adverse events. The proposed control system optimizes grid operations through network reconfiguration, control of distributed energy storage systems (ESSs), and on-load tap changers. The core of the EMPC algorithm is a nonconvex optimization problem integrating the ESSs dynamics, the topological and power technical constraints of the grid, and the modeling of the cascading effects of potential adverse events. An equivalent (i.e., having the same optimal solution) proxy of the nonconvex problem is proposed to make the solution more tractable. Simulations performed on a 16-bus test distribution network validate the proposed control strategy

Regression Monte Carlo for Microgrid Management

We study an islanded microgrid system designed to supply a small village with the power produced by photovoltaic panels, wind turbines and a diesel generator. A battery storage system device is used to shift power from times of high renewable production to times of high demand. We introduce a methodology to solve microgrid management problem using different variants of Regression Monte Carlo algorithms and use numerical simulations to infer results about the optimal design of the grid.Comment: CEMRACS 2017 Summer project - proceedings