7,592 research outputs found
Natural ZMP trajectories for biped robot reference generation
The control of a biped humanoid is a challenging
task due to the hard-to-stabilize dynamics. Walking reference
trajectory generation is a key problem. Linear Inverted
Pendulum Model (LIPM) and Zero Moment Point (ZMP)
Criterion based approaches in stable walking reference
generation are reported. In these methods, generally, the ZMP
reference during a stepping motion is kept fixed in the middle of
the supporting foot sole. This kind of reference generation lacks
naturalness, in that, the ZMP in the human walk does not stay
fixed, but it moves forward under the supporting foot. This paper
proposes a reference generation algorithm based on the LIPM
and moving support foot ZMP references. The application of
Fourier series approximation simplifies the solution and it
generates a smooth ZMP reference. A simple inverse kinematics
based joint space controller is used for the tests of the developed
reference trajectory through full-dynamics 3D simulation. A 12
DOF biped robot model is used in the simulations. Simulation
studies suggest that the moving ZMP references are more energy
efficient than the ones with fixed ZMP under the supporting foot.
The results are promising for implementations
Integration of vertical COM motion and angular momentum in an extended Capture Point tracking controller for bipedal walking
In this paper, we demonstrate methods for bipedal walking control based on the Capture Point (CP) methodology.
In particular, we introduce a method to intuitively derive a CP
reference trajectory from the next three steps and extend the
linear inverted pendulum (LIP) based CP tracking controller
introduced in [1], generalizing it to a model that contains
vertical CoM motions and changes in angular momentum.
Respecting the dynamics of general multibody systems, we
propose a measurement-based compensation of multi-body
effects, which leads to a stable closed-loop dynamics of bipedal walking robots. In addition we propose a ZMP projection method, which prevents the robots feet from tilting and ensures the best feasible CP tracking. The extended CP controller’s performance is validated in OpenHRP3 [2] simulations and compared to the controller proposed in [1]
Humanoid robot walking control on inclined planes
The humanoid bipedal structure is suitable for a assitive robot functioning in the human environment. However, the bipedal walk is a difficult control problem. Walking just on even floor is not satisfactory for the applicability of a humanoid robot. This paper presents a study on bipedal walk on inclined planes. A Zero Moment Point (ZMP) based reference generation technique is employed. The orientation of the feet is adjusted online by a fuzzy logic system to adapt to different walking surface slopes. This system uses a sampling time larger than the one of the joint space position controllers. The average value of the body pitch angle is used as the inputs to the fuzzy logic system. A foot pitch orientation compensator implemented independently for the two feet complements the fuzyy controller. A 12-degrees-of-freedom (DOF) biped robot model is used in the full-dynamics 3-D simulations. Simulations are carried out on even floor and inclined planes with different slopes. The results indicate that the control method presented is successful in enabling the robot to climb slopes of 8.5 degrees (15 percent grade)
An Efficiently Solvable Quadratic Program for Stabilizing Dynamic Locomotion
We describe a whole-body dynamic walking controller implemented as a convex
quadratic program. The controller solves an optimal control problem using an
approximate value function derived from a simple walking model while respecting
the dynamic, input, and contact constraints of the full robot dynamics. By
exploiting sparsity and temporal structure in the optimization with a custom
active-set algorithm, we surpass the performance of the best available
off-the-shelf solvers and achieve 1kHz control rates for a 34-DOF humanoid. We
describe applications to balancing and walking tasks using the simulated Atlas
robot in the DARPA Virtual Robotics Challenge.Comment: 6 pages, published at ICRA 201
Ground reaction force sensor fault detection and recovery method based on virtual force sensor for walking biped robots
This paper presents a novel method for ground force sensor faults detection and faulty signal reconstruction using Virtual force Sensor (VFS) for slow walking bipeds. The design structure of the VFS consists of two steps, the total ground reaction force (GRF) and its location estimation for each leg based on the center of mass (CoM) position, the leg kinematics, and the IMU readings is carried on in the first step. In the second step, the optimal estimation of the distributed reaction forces at the contact points in the feet sole of walking biped is carried on. For the optimal estimation, a constraint model is obtained for the distributed reaction forces at the contact points and the quadratic programming optimization method is used to solve for the GRF. The output of the VFS is used for fault detection and recovery. A faulty signal model is formed to detect the faults based on a threshold, and recover the signal using the VFS outputs. The sensor offset, drift, and frozen output faults are studied and tested. The proposed method detects and estimates the faults and recovers the faulty signal smoothly. The validity of the proposed estimation method was confirmed by simulations on 3D dynamics model of the humanoid robot SURALP while walking. The results are promising and prove themselves well in all of the studied fault cases
A Reactive and Efficient Walking Pattern Generator for Robust Bipedal Locomotion
Available possibilities to prevent a biped robot from falling down in the
presence of severe disturbances are mainly Center of Pressure (CoP) modulation,
step location and timing adjustment, and angular momentum regulation. In this
paper, we aim at designing a walking pattern generator which employs an optimal
combination of these tools to generate robust gaits. In this approach, first,
the next step location and timing are decided consistent with the commanded
walking velocity and based on the Divergent Component of Motion (DCM)
measurement. This stage which is done by a very small-size Quadratic Program
(QP) uses the Linear Inverted Pendulum Model (LIPM) dynamics to adapt the
switching contact location and time. Then, consistent with the first stage, the
LIPM with flywheel dynamics is used to regenerate the DCM and angular momentum
trajectories at each control cycle. This is done by modulating the CoP and
Centroidal Momentum Pivot (CMP) to realize a desired DCM at the end of current
step. Simulation results show the merit of this reactive approach in generating
robust and dynamically consistent walking patterns
Keep Rollin' - Whole-Body Motion Control and Planning for Wheeled Quadrupedal Robots
We show dynamic locomotion strategies for wheeled quadrupedal robots, which
combine the advantages of both walking and driving. The developed optimization
framework tightly integrates the additional degrees of freedom introduced by
the wheels. Our approach relies on a zero-moment point based motion
optimization which continuously updates reference trajectories. The reference
motions are tracked by a hierarchical whole-body controller which computes
optimal generalized accelerations and contact forces by solving a sequence of
prioritized tasks including the nonholonomic rolling constraints. Our approach
has been tested on ANYmal, a quadrupedal robot that is fully torque-controlled
including the non-steerable wheels attached to its legs. We conducted
experiments on flat and inclined terrains as well as over steps, whereby we
show that integrating the wheels into the motion control and planning framework
results in intuitive motion trajectories, which enable more robust and dynamic
locomotion compared to other wheeled-legged robots. Moreover, with a speed of 4
m/s and a reduction of the cost of transport by 83 % we prove the superiority
of wheeled-legged robots compared to their legged counterparts.Comment: IEEE Robotics and Automation Letter
- …