Control of a compact, tetherless ROV for in-contact inspection of complex underwater structures

In this paper we present the dynamic modeling and control of EVIE (Ellipsoidal Vehicle for Inspection and Exploration), an underwater surface contact ROV (Remotely Operated Vehicle) for inspection and exploration. Underwater surface inspection is a challenging and hazardous task that demands sophisticated automation – as in boiling water nuclear reactors, water pipeline, submarine hull and oil pipelines inspection. EVIE is inspired by its predecessor, the Omni Submersible, in its ellipsoidal, streamlined, and appendage free shape. The objective for the robot is to carry inspection sensors – magnetic, acoustics or visual – to determine cracks on submerged surfaces. Unlike a robot moving in a practically boundless fluid, contact forces complicate the dynamics by bringing in normal and frictional forces, both of which are highly non linear in nature. This makes the modeling much more challenging and the development of an integrated controller more difficult. In this paper we will discuss the preliminary design and hydrodynamic modeling of such a robot. We analyze in detail the controls for one of the many transitional states of this robot. Eventually all transitional states need to be integrated to develop a hybrid dynamical system which shall use a controller that can adapt to its different states.Electric Power Research Institut

Subsea inspection and monitoring challenges

Master's thesis in Offshore technology : industrial asset managementThis paper uncovers and suggests solutions for the challenges to control change over time more reliable and cost effective. Front-end concept engineering, design, inspection and monitoring strategies, technologies, systems and methods for Life-of-Field are recommended. Autonomous underwater vehicles (AUV) are identified as a possible cost- efficient opportunity to reduce cost of inspections and monitoring operations while safeguarding asset integrity. A recognized design spiral methodology is used to perform a front-end concept evaluation of an AUV system. Investigation of key technological limitations and new developments within underwater communication, energy storage and wireless power transmission is performed. It further enables opportunities such as AUV recharging station on the seafloor for better utilization. One major learning point is through the use of numerical models and the outcome being a better and more hydro effective hull design. One expectation from this paper may be the aid to collaborating partners in their design work

Locomotion system for ground mobile robots in uneven and unstructured environments

One of the technology domains with the greatest growth rates nowadays is service robots. The extensive use of ground mobile robots in environments that are unstructured or structured for humans is a promising challenge for the coming years, even though Automated Guided Vehicles (AGV) moving on flat and compact grounds are already commercially available and widely utilized to move components and products inside indoor industrial buildings. Agriculture, planetary exploration, military operations, demining, intervention in case of terrorist attacks, surveillance, and reconnaissance in hazardous conditions are important application domains. Due to the fact that it integrates the disciplines of locomotion, vision, cognition, and navigation, the design of a ground mobile robot is extremely interdisciplinary. In terms of mechanics, ground mobile robots, with the exception of those designed for particular surroundings and surfaces (such as slithering or sticky robots), can move on wheels (W), legs (L), tracks (T), or hybrids of these concepts (LW, LT, WT, LWT). In terms of maximum speed, obstacle crossing ability, step/stair climbing ability, slope climbing ability, walking capability on soft terrain, walking capability on uneven terrain, energy efficiency, mechanical complexity, control complexity, and technology readiness, a systematic comparison of these locomotion systems is provided in [1]. Based on the above-mentioned classification, in this thesis, we first introduce a small-scale hybrid locomotion robot for surveillance and inspection, WheTLHLoc, with two tracks, two revolving legs, two active wheels, and two passive omni wheels. The robot can move in several different ways, including using wheels on the flat, compact ground,[1] tracks on soft, yielding terrain, and a combination of tracks, legs, and wheels to navigate obstacles. In particular, static stability and non-slipping characteristics are considered while analyzing the process of climbing steps and stairs. The experimental test on the first prototype has proven the planned climbing maneuver’s efficacy and the WheTLHLoc robot's operational flexibility. Later we present another development of WheTLHLoc and introduce WheTLHLoc 2.0 with newly designed legs, enabling the robot to deal with bigger obstacles. Subsequently, a single-track bio-inspired ground mobile robot's conceptual and embodiment designs are presented. This robot is called SnakeTrack. It is designed for surveillance and inspection activities in unstructured environments with constrained areas. The vertebral column has two end modules and a variable number of vertebrae linked by compliant joints, and the surrounding track is its essential component. Four motors drive the robot: two control the track motion and two regulate the lateral flexion of the vertebral column for steering. The compliant joints enable limited passive torsion and retroflection of the vertebral column, which the robot can use to adapt to uneven terrain and increase traction. Eventually, the new version of SnakeTrack, called 'Porcospino', is introduced with the aim of allowing the robot to move in a wider variety of terrains. The novelty of this thesis lies in the development and presentation of three novel designs of small-scale mobile robots for surveillance and inspection in unstructured environments, and they employ hybrid locomotion systems that allow them to traverse a variety of terrains, including soft, yielding terrain and high obstacles. This thesis contributes to the field of mobile robotics by introducing new design concepts for hybrid locomotion systems that enable robots to navigate challenging environments. The robots presented in this thesis employ modular designs that allow their lengths to be adapted to suit specific tasks, and they are capable of restoring their correct position after falling over, making them highly adaptable and versatile. Furthermore, this thesis presents a detailed analysis of the robots' capabilities, including their step-climbing and motion planning abilities. In this thesis we also discuss possible refinements for the robots' designs to improve their performance and reliability. Overall, this thesis's contributions lie in the design and development of innovative mobile robots that address the challenges of surveillance and inspection in unstructured environments, and the analysis and evaluation of these robots' capabilities. The research presented in this thesis provides a foundation for further work in this field, and it may be of interest to researchers and practitioners in the areas of robotics, automation, and inspection. As a general note, the first robot, WheTLHLoc, is a hybrid locomotion robot capable of combining tracked locomotion on soft terrains, wheeled locomotion on flat and compact grounds, and high obstacle crossing capability. The second robot, SnakeTrack, is a small-size mono-track robot with a modular structure composed of a vertebral column and a single peripherical track revolving around it. The third robot, Porcospino, is an evolution of SnakeTrack and includes flexible spines on the track modules for improved traction on uneven but firm terrains, and refinements of the shape of the track guidance system. This thesis provides detailed descriptions of the design and prototyping of these robots and presents analytical and experimental results to verify their capabilities

Oceanus.

v. 34, no. 1 (1991

Development of an Underground Mine Scout Robot

Despite increased safety and improved technology in the mining industry, fatal disasters still occur. Robots have the potential to be an invaluable resource for search and rescue teams to scout dangerous or difficult situations. Existing underground mine search and rescue robots have demonstrated limited success. Identified through literature, the two primary concerns are unreliable locomotion systems and a lack of underground mine environment consideration. HADES, an underground mine disaster scout, addresses these issues with a unique chassis and novel locomotion. A system level design is carried out, addressing the difficulties of underground mine environments. To operate in an explosive atmosphere, a purge and pressurisation system is applied to a fibre glass chassis, with intrinsic safety incorporated into the sensor design. To prevent dust, dirt and water damaging the electronics, ingress protection is applied through sealing. The chassis is invertible, with a low centre of gravity and a roll-axis pivot. This chassis design, in combination with spoked-wheels allows traversal of the debris and rubble of a disaster site. Electrochemical gas sensors are incorporated, along with RGB-D cameras, two-way audio and various other environment sensors. A communication system combining a tether and mesh network is designed, with wireless nodes to increase wireless range and reliability. Electronic hardware and software control are implemented to produce an operational scout robot. HADES is 0.7 × 0.6 × 0.4 m, with a sealed IP65 chassis. The locomotion system is robust and effective, able to traverse most debris and rubble, as tested on the university grounds and at a clean landfill. Bottoming out is the only problem encountered, but can be avoided by approaching obstacles correctly. The motor drive system is able to drive HADES at walking speed (1.4 m/s) and it provides more torque than traction allows. Six Lithium-Polymer batteries enable 2 hours 28 minutes of continuous operation. At 20 kg and ~$7000, HADES is a portable, inexpensive scout robot for underground mine disasters

New Approaches in Automation and Robotics

The book New Approaches in Automation and Robotics offers in 22 chapters a collection of recent developments in automation, robotics as well as control theory. It is dedicated to researchers in science and industry, students, and practicing engineers, who wish to update and enhance their knowledge on modern methods and innovative applications. The authors and editor of this book wish to motivate people, especially under-graduate students, to get involved with the interesting field of robotics and mechatronics. We hope that the ideas and concepts presented in this book are useful for your own work and could contribute to problem solving in similar applications as well. It is clear, however, that the wide area of automation and robotics can only be highlighted at several spots but not completely covered by a single book

Charakterisierung von hydrodynamischen Unsicherheiten und 3D-Bewegungsplanung als Basis geregelter Unterwasserfahrzeuge

Die Arbeit zeigt, wie tiefgehendes Systemverständnis von Unterwasserfahrzeugen (UUVs), zweckmäßige Bewegungsplanung und umfängliche Reglersynthese ineinander greifen können. Dazu wurde Unsicherheiten (u.a. Zähigkeits- und Trägheitskräfte sowie Fluiddichte) an diversen UUVs detailliert behandelt. Den Kern stellt aber ein entwickelter Algorithmus auf Basis der „Methode der elastischen Bänder“ zur Planung im 3D-Raum dar, mit dessen Hilfe unterschiedliche Aufgaben der UUVs modelliert werden können. Zu deren Realisierung wurde eine Zustandsregelung mit Polbereichsvorgabe beispielhaft vorgeführt.The thesis presents how in-depth system understanding of underwater vehicles (UUVs), proper motion planning and a comprehensive controller synthesis can intertwine. To this end, uncertainties on various UUVs (e.g. viscous and inertial loads as well as fluid density) were dealt with in detail. However, the core is a developed algorithm based on the ‚method of elastic bands’ for planning in a 3D space. It can be used to model the different tasks of UUVs. For their realisation a state control with pole range specification was exemplarily demonstrated

Distributed sensing in flexible robotic fins: propulsive force prediction and underwater contact sensing

There is recent biological evidence that the pectoral fins of bluegill sunfish are innervated with nerves that respond to bending, and these fish contact obstacles with their fins. However, it is not known how fin-intrinsic sensing could be used to mediate propulsion and touch in engineered fins. The objective of this thesis is to understand the use of distributed sensing in robotic fins, inspired by bony fish fins, for the prediction of propulsive forces and for the discrimination between fluidic loading and contact loading during underwater touch. The research integrates engineering and biology and builds an understanding of fin-intrinsic sensing through study of swimming fish and robotic models of fish fins and sensors. Multiple studies identify which sensor types, sensor placement locations, and model conditions are best for predicting fin propulsive forces and for predicting the state of contact. Comparisons are made between linear and nonlinear Volterra-series convolution models to represent the mapping from sensory data to forces. Best practices for instrumentation and model selection are extracted for a broad range of swimming conditions on a complex, multi-DOF, flexible fin. This knowledge will guide the development of multi-functional systems to navigate and propel through complex, occluded, underwater environments and for sensing and responding to environmental perturbations and obstacles.Ph.D., Mechanical Engineering and Mechanics -- Drexel University, 201

Sea Mines and Countermeasures: A Bibliography

This compilation was prepared for the Dudley Knox Library, Naval Postgraduate School, Monterey, CA