Adaptive Controller Placement for Wireless Sensor-Actuator Networks with Erasure Channels

Wireless sensor-actuator networks offer flexibility for control design. One novel element which may arise in networks with multiple nodes is that the role of some nodes does not need to be fixed. In particular, there is no need to pre-allocate which nodes assume controller functions and which ones merely relay data. We present a flexible architecture for networked control using multiple nodes connected in series over analog erasure channels without acknowledgments. The control architecture proposed adapts to changes in network conditions, by allowing the role played by individual nodes to depend upon transmission outcomes. We adopt stochastic models for transmission outcomes and characterize the distribution of controller location and the covariance of system states. Simulation results illustrate that the proposed architecture has the potential to give better performance than limiting control calculations to be carried out at a fixed node.Comment: 10 pages, 8 figures, to be published in Automatic

On Random Sampling for Compliance Monitoring in Opportunistic Spectrum Access Networks

In the expanding spectrum marketplace, there has been a long term evolution towards more market€“oriented mechanisms, such as Opportunistic Spectrum Access (OSA), enabled through Cognitive Radio (CR) technology. However, the potential of CR technologies to revolutionize wireless communications, also introduces challenges based upon the potentially non€“deterministic CR behaviour in the Electrospace. While establishing and enforcing compliance to spectrum etiquette rules are essential to realization of successful OSA networks in the future, there has only been recent increased research activity into enforcement. This dissertation presents novel work on the spectrum monitoring aspect, which is crucial to effective enforcement of OSA. An overview of the challenges faced by current compliance monitoring methods is first presented. A framework is then proposed for the use of random spectral sampling techniques to reduce data collection complexity in wideband sensing scenarios. This approach is recommended as an alternative to Compressed Sensing (CS) techniques for wideband spectral occupancy estimation, which may be difficult to utilize in many practical congested scenarios where compliance monitoring is required. Next, a low€“cost computational approach to online randomized temporal sensing deployment is presented for characterization of temporal spectrum occupancy in cognitive radio scenarios. The random sensing approach is demonstrated and its performance is compared to CS€“based approach for occupancy estimation. A novel frame€“based sampling inversion technique is then presented for cases when it is necessary to track the temporal behaviour of individual CRs or CR networks. Parameters from randomly sampled Physical Layer Convergence Protocol (PLCP) data frames are used to reconstruct occupancy statistics, taking account of missed frames due to sampling design, sensor limitations and frame errors. Finally, investigations into the use of distributed and mobile spectrum sensing to collect spatial diversity to improve the above techniques are presented, for several common monitoring tasks in spectrum enforcement. Specifically, focus is upon techniques for achieving consensus in dynamic topologies such as in mobile sensing scenarios

From Sensing to Predictions and Database Technique: A Review of TV White Space Information Acquisition in Cognitive Radio Networks

Strategies to acquire white space information is the single most significant functionality in cognitive radio networks (CRNs) and as such, it has gone some evolution to enhance information accuracy. The evolution trends are spectrum sensing, prediction algorithm and recently, geo-location database technique. Previously, spectrum sensing was the main technique for detecting the presence/absence of a primary user (PU) signal in a given radio frequency (RF) spectrum. However, this expectation could not materialized as a result of numerous technical challenges ranging from hardware imperfections to RF signal impairments. To convey the evolutionary trends in the development of white space information, we present a survey of the contemporary advancements in PU detection with emphasis on the practical deployment of CRNs i.e. Television white space (TVWS) networks. It is found that geo-location database is the most reliable technique to acquire TVWS information although, it is financially driven. Finally, using financially driven database model, this study compared the data-rate and spectral efficiency of FCC and Ofcom TV channelization. It was discovered that Ofcom TV channelization outperforms FCC TV channelization as a result of having higher spectrum bandwidth. We proposed the adoption of an all-inclusive TVWS information acquisition model as the future research direction for TVWS information acquisition techniques

Efficiency and Sustainability of the Distributed Renewable Hybrid Power Systems Based on the Energy Internet, Blockchain Technology and Smart Contracts

The climate changes that are visible today are a challenge for the global research community. In this context, renewable energy sources, fuel cell systems, and other energy generating sources must be optimally combined and connected to the grid system using advanced energy transaction methods. As this book presents the latest solutions in the implementation of fuel cell and renewable energy in mobile and stationary applications such as hybrid and microgrid power systems based on energy internet, blockchain technology, and smart contracts, we hope that they are of interest to readers working in the related fields mentioned above

Fairness-Adaptive Goodput-Based Resource Allocation in OFDMA Downlink with ARQ

We present a cross-layer resource-allocation (RA) scheme for the downlink in orthogonal frequency-division multiple-access (OFDMA) systems with fairness control among the users, where the resources to be allocated are power, bits per symbol, and subchannels. The use of subchannels, which are defined as group of subcarriers, leads to reducing the complexity of the bandwidth allocation compared with the commonly adopted subcarrier allocation. A goodput-based optimization function, which is derived by combining automatic repeat request (ARQ) and physical (PHY)-layer parameters, is used to perform RA for applications that demand error-free transmissions. Two transmission strategies are considered, with and without concatenation of subchannels, for which two different RA methods are developed, respectively. We also propose an algorithm that improves the complexity associated to both concatenation and nonconcatenation schemes, without appreciable performance loss.The work was supported by the GRE3N Project under Grant TEC2011-29006-C03-03.Publicad

Distributed Control for Cyber-Physical Systems

Networked Cyber-Physical Systems (CPS) are fundamentally constrained by the tight coupling and closed-loop control and actuation of physical processes. To address actuation in such closed-loop wireless control systems there is a strong need to re-think the communication architectures and protocols for maintaining stability and performance in the presence of disturbances to the network, environment and overall system objectives. We review the current state of network control efforts for CPS and present two complementary approaches for robust, optimal and composable control over networks. We first introduce a computer systems approach with Embedded Virtual Machines (EVM), a programming abstraction where controller tasks, with their control and timing properties, are maintained across physical node boundaries. Controller functionality is decoupled from the physical substrate and is capable of runtime migration to the most competent set of physical controllers to maintain stability in the presence of changes to nodes, links and network topology. We then view the problem from a control theoretic perspective to deliver fully distributed control over networks with Wireless Control Networks (WCN). As opposed to traditional networked control schemes where the nodes simply route information to and from a dedicated controller, our approach treats the network itself as the controller. In other words, the computation of the control law is done in a fully distributed way inside the network. In this approach, at each time-step, each node updates its internal state to be a linear combination of the states of the nodes in its neighborhood. This causes the entire network to behave as a linear dynamical system, with sparsity constraints imposed by the network topology. This eliminates the need for routing between “sensor → channel → dedicated controller/estimator → channel → actuator”, allows for simple transmission scheduling, is operational on resource constrained low-power nodes and allows for composition of additional control loops and plants. We demonstrate the potential of such distributed controllers to be robust to a high degree of link failures and to maintain stability even in cases of node failures

Distributed Channel Access for Control Over Unknown Memoryless Communication Channels

We consider the distributed channel access problem for a system consisting of multiple control subsystems that close their loop over a shared wireless network. We propose a distributed method for providing deterministic channel access without requiring explicit information exchange between the subsystems. This is achieved by utilizing timers for prioritizing channel access with respect to a local cost which we derive by transforming the control objective cost to a form that allows its local computation. This property is then exploited for developing our distributed deterministic channel access scheme. A framework to verify the stability of the system under the resulting scheme is then proposed. Next, we consider a practical scenario in which the channel statistics are unknown. We propose learning algorithms for learning the parameters of imperfect communication links for estimating the channel quality and, hence, define the local cost as a function of this estimation and control performance. We establish that our learning approach results in collision-free channel access. The behavior of the overall system is exemplified via a proof-of-concept illustrative example, and the efficacy of this mechanism is evaluated for large-scale networks via simulations.Comment: This work has been submitted to the IEEE for possible publication. Copyright may be transferred without notice, after which this version may no longer be accessibl

Real-Time Sensor Networks and Systems for the Industrial IoT

The Industrial Internet of Things (Industrial IoT—IIoT) has emerged as the core construct behind the various cyber-physical systems constituting a principal dimension of the fourth Industrial Revolution. While initially born as the concept behind specific industrial applications of generic IoT technologies, for the optimization of operational efficiency in automation and control, it quickly enabled the achievement of the total convergence of Operational (OT) and Information Technologies (IT). The IIoT has now surpassed the traditional borders of automation and control functions in the process and manufacturing industry, shifting towards a wider domain of functions and industries, embraced under the dominant global initiatives and architectural frameworks of Industry 4.0 (or Industrie 4.0) in Germany, Industrial Internet in the US, Society 5.0 in Japan, and Made-in-China 2025 in China. As real-time embedded systems are quickly achieving ubiquity in everyday life and in industrial environments, and many processes already depend on real-time cyber-physical systems and embedded sensors, the integration of IoT with cognitive computing and real-time data exchange is essential for real-time analytics and realization of digital twins in smart environments and services under the various frameworks’ provisions. In this context, real-time sensor networks and systems for the Industrial IoT encompass multiple technologies and raise significant design, optimization, integration and exploitation challenges. The ten articles in this Special Issue describe advances in real-time sensor networks and systems that are significant enablers of the Industrial IoT paradigm. In the relevant landscape, the domain of wireless networking technologies is centrally positioned, as expected