A hybrid multilevel converter for medium and high voltage applications

This paper investigates the suitability of the hybrid multilevel converter for medium and high voltage application. The converter operation, modulation, and capacitor voltage balancing method are described in detail. The ability of the hybrid multilevel converter to operate with different modulation indices and load power factors is investigated. It has been established that the hybrid multilevel converter is capable of operating independent of load power factor. Operation with variable modulation index increases voltage stresses on the converter switches and does not alter the fundamental voltage magnitude as in all known voltage source converter topologies. The viability of the hybrid multilevel converter for medium and high voltage applications is confirmed by simulations

Quasi Two-Level PWM Operation of an MMC Phase Leg with Reduced Module Capacitance

The modular multilevel converter offers benefits for medium and high voltage power conversion due to indirect series connection of devices. The drawback is a large amount of capacitance that has to be installed in each module, often prohibiting its use in cost sensitive applications. This letter proposes a new operation mode of modular multilevel topologies that allows reducing the capacitance by at least an order of magnitude. To achieve this, the multilevel operation is sacrificed, but many advantages of indirect series connection, such as proper voltage sharing, small voltage steps, limited voltage slopes, modularity, and scalability remain

Designing a Passively Damped Quasi-Two-Level-Operated Modular Multilevel Converter for Drive Applications

This paper concentrates on the simplest quasi-two-level PWM operation mode for modular multilevel converters, where the internal currents within the converter are not controlled. The model of the converter is derived and the properties of the inherent resonance circuit within the converter are discussed. The paper proposes an optimized design approach for the converter parameters and shows several challenges in the practical design. The main problem of the studied converter operation mode is the dependency of the converter behavior on many parasitic parameters that can significantly vary in the converter production. Moreover, the paper shows that when the converter losses are low, the optimized converter inductances are below the values expected for realistic converter construction. Consequently, the module capacitances have to be significantly increased or the converter internal currents reach exceedingly high values. Furthermore, a comparison is drawn to the quasi-two-level PWM operation mode in which the leg currents and branch energies are controlled, showing several crucial disadvantages of the studied passively damped operation mode. The utilized models and the basic concepts are validated experimentally on a downscaled converter prototype

Quasi two-level PWM operation of a nine-arm modular multilevel converter for six-phase medium-voltage motor drives

This paper proposes a hybrid converter for medium-voltage six-phase machine drive systems that mixes the operation of a traditional two-level voltage-source inverter and the modular multilevel converter (MMC) to enable operation over a wide frequency range. Topologically, the proposed converter consists of nine arms resembling two sets of three-phase MMCs with three common arms, yielding a nine-arm MMC with a 25% reduction in the number of employed arms compared to a traditional dual three-phase MMC. The multilevel property of a standard MMC is emulated in the proposed converter, however on a two-level basis, resulting in a stepped two-level output voltage waveform. The proposed converter has a reduced footprint with advantages of small voltage steps, modular structure, and ease of scalability. Further, it is able to drive high-power six-phase machines within low operating frequencies at the rated torque. The operating principle of the converter is elaborated, and its modulation scheme is discussed. The features of the proposed converter are verified through simulations and experimentally

Grid-Connected Single-Star Bridge-Cells Modular Multilevel Cascaded Converter with Selective Harmonic Elimination Techniques

Nowadays, Renewable Energy Sources (RESs) are receiving enormous attention due to the noticeable exhaustion of fossil fuel and its emission of greenhouse gases. DC-AC converters have attracted the attention of the researchers, as they are entailed to integrate RESs to the grid to comply with the grid frequency and voltage requirements. Due to the high penetration of RESs, especially with elevated power levels, high-power converters are needed, which necessitates higher voltage and current ratings of the semiconductor devices. The unavailability of high voltage semiconductor devices has directed the attention to the use of either series connection of semiconductor devices or Multilevel Inverters (MLIs). MLIs allow using several low rated semiconductors to hold the high output power of the inverter. The MLI output waveform is close to sinusoidal in nature, therefore it may require a small filter to enhance the output power quality. There are many types of MLIs, where the most common MLIs are Flying Capacitor, Diode Clamped, and Modular Multilevel Cascaded Converter (MMCC). The MMCC can be classified into three main formations, the Single-Star Bridge-Cells MMCC (SSBC-MMCC), the Double-Star Bridge-Cells MMCC (DSBC-MMCC), and the Double-Star Chopper-Cells MMCC (DSCC-MMCC). The main advantage of the MMCC is the modularity and scalability. In addition, the MMCC does not require any clamping diodes or flying capacitors for clamping the voltage across the switches. In this thesis, the MMCC will be used to integrate high-power RESs to Grid. Nevertheless, the high-power applications necessitate low switching frequency operations. One of the most common controlling techniques of MLI with low frequency operation is the Selective Harmonic Elimination (SHE). SHE insures also the output current Total Harmonic Distortion (THD) to be minimized. One disadvantage of the SHE method is that the complexity of the algorithm along with the equations used is increased by the increase of the MMCC number of levels. Therefore, other alternatives of SHE techniques will be studied in this work to overcome this complexity. This thesis focuses typically on MMCC, particularly the SSBC-MMCC. In this work, a high-power grid-connected SSBC-MMCC is controlled with three different SHE techniques, complying with low switching frequency operation limitation in high-power applications. In addition to the Conventional SHE (C-SHE) technique, Quasi-SHE (Q-SHE) and Asymmetrical-SHE (A-SHE) approaches are proposed and assessed. Q-SHE and A-SHE approaches are based on eliminating selected low order harmonics (for instance, eliminating the fifth and seventh order harmonics), irrelevant to the number of employed levels provided that the number of levels allows for the required harmonic elimination. Compared with the C-SHE approach, the Q-SHE and A-SHE require less computational burden in solving the required equation groups, especially when a high number of levels and/or multiple switching angles for each voltage level are needed, while maintaining the same dv/dt of the output voltage. A 5MW, 17-level, grid-connected SSBC-MMCC, controlled in the synchronous rotating reference frame, is employed for assessing the addressed SHE techniques. The assessment is validated through simulation results using Matlab/Simulink platform

Soft-switching cells for Modular Multilevel Converters for efficient grid integration of renewable sources

The Modular Multilevel Converter (MMC) concept is a modern energy conversion structure that stands out for a number of interesting features that opens wide application chances in Power Systems, for example for efficient grid integration of renewable sources. In these high-voltage, high-power application fields, a high efficiency is mandatory. In this regard, an interesting and promising development opportunity could be to make soft-switching the elementary converters of the submodules (cells), half H-bridges or full H-bridges, obtaining at the same time the advantage of increasing the switching frequency. The-Active Resonant Commutated Pole Converter (ARCP) or the Auxiliary Quasi Resonant DC-link Inverter (AQRDCL) soft-switching topologies appear adequate for this purpose. This paper is dedicated to examining these development possibilities

Experimental Validation of a quasi Z-Source Modular Multilevel Converter with DC Fault Blocking Capability

This paper considers the design methodology and the modulation of the quasi Z-source modular multilevel converter (qZS-MMC) with half bridge sub-modules and evaluates its performance in voltage boosting mode for medium voltage applications. The qZS-MMC consists of two quasi Z-source networks inserted between the two terminals of the DC input source and the DC-link terminals of a modular multilevel converter (MMC), which allows the generation of an output voltage larger than the input DC voltage. Two modulation schemes have been analysed based on a mathematical derivation for the converter internal voltages, currents, and stored energy. The quasi Z-source circuit is proven to provide the qZS-MMC with half bridge sub-modules to deal with DC-faults. The experimental results validate the performance of the proposed modulation schemes and the DC-fault blocking capability of the qZS MMC. Finally, the losses of the qZS-MMC is compared against a standard MMC using full bridge sub-modules that can also provide DC fault capability. The range in which the qZS-MMC is more efficient has been identified. Furthermore, the qZS-MMC can provide a significant reduction in number of semiconductor power devices with the same performance

New modulation scheme for bidirectional quasi z-source modular multilevel converters

This paper proposes a dedicated modulation scheme for a bidirectional quasi Z-source modular multilevel converter (BqZS-MMC). The operation principle and a suitable PWM method are proposed. The relation between the modulation index and shoot-through duty ratio is derived. A formula for calculating the required value of quasi Z-source capacitance is given. The simulation results presented in the paper validate the operation and the performance of the proposed topology

Soft-switching modular multilevel converters for efficient grid integration of renewable sources

The Modular Multilevel Converter (MMC) concept is a modern energy conversion structure that stands out for a number of interesting features that opens wide application chances in Power Systems, for example for efficient grid integration of renewable sources. In these high-voltage, high-power application fields, a high efficiency is mandatory. In this regard, an interesting and promising development opportunity could be to make soft-switching the elementary converters of the submodules (cells), half H-bridges or full H-bridges, obtaining at the same time the advantage of increasing the switching frequency. The ARCP or the AQRDCL soft-switching topologies appear adequate for this purpose. This paper is dedicated to examining these development possibilities

Power Converters in Power Electronics

In recent years, power converters have played an important role in power electronics technology for different applications, such as renewable energy systems, electric vehicles, pulsed power generation, and biomedical sciences. Power converters, in the realm of power electronics, are becoming essential for generating electrical power energy in various ways. This Special Issue focuses on the development of novel power converter topologies in power electronics. The topics of interest include, but are not limited to: Z-source converters; multilevel power converter topologies; switched-capacitor-based power converters; power converters for battery management systems; power converters in wireless power transfer techniques; the reliability of power conversion systems; and modulation techniques for advanced power converters