Coarse-grained reconfigurable array architectures

Coarse-Grained Reconfigurable Array (CGRA) architectures accelerate the same inner loops that benefit from the high ILP support in VLIW architectures. By executing non-loop code on other cores, however, CGRAs can focus on such loops to execute them more efficiently. This chapter discusses the basic principles of CGRAs, and the wide range of design options available to a CGRA designer, covering a large number of existing CGRA designs. The impact of different options on flexibility, performance, and power-efficiency is discussed, as well as the need for compiler support. The ADRES CGRA design template is studied in more detail as a use case to illustrate the need for design space exploration, for compiler support and for the manual fine-tuning of source code

Method for run time hardware code profiling for algorithm acceleration

In this paper we propose a method for run time profiling of applications on instruction level by analysis of loops. Instead of looking for coarse grain blocks we concentrate on fine grain but still costly blocks in terms of execution times. Most code profiling is done in software by introducing code into the application under profile witch has time overhead, while in this work data for the position of a loop, loop body, size and number of executions is stored and analysed using a small non intrusive hardware block. The paper describes the system mapping to runtime reconfigurable systems. The fine grain code detector block synthesis results and its functionality verification are also presented in the paper. To demonstrate the concept MediaBench multimedia benchmark running on the chosen development platform is use

Implementation of Data-Driven Applications on Two-Level Reconfigurable Hardware

RÉSUMÉ Les architectures reconfigurables à large grain sont devenues un sujet important de recherche en raison de leur haut potentiel pour accélérer une large gamme d’applications. Ces architectures utilisent la nature parallèle de l’architecture matérielle pour accélérer les calculs. Les architectures reconfigurables à large grain sont en mesure de combler les lacunes existantes entre le FPGA (architecture reconfigurable à grain fin) et le processeur. Elles contrastent généralement avec les Application Specific Integrated Circuits (ASIC) en ce qui concerne la performance (moins bonnes) et la flexibilité (meilleures). La programmation d’architectures reconfigurables est un défi qui date depuis longtemps et pose plusieurs problèmes. Les programmeurs doivent être avisés des caractéristiques du matériel sur lequel ils travaillent et connaître des langages de description matériels tels que VHDL et Verilog au lieu de langages de programmation séquentielle. L’implémentation d’un algorithme sur FPGA s’avère plus difficile que de le faire sur des CPU ou des GPU. Les implémentations à base de processeurs ont déjà leur chemin de données pré synthétisé et ont besoin uniquement d’un programme pour le contrôler. Par contre, dans un FPGA, le développeur doit créer autant le chemin de données que le contrôleur. Cependant, concevoir une nouvelle architecture pour exploiter efficacement les millions de cellules logiques et les milliers de ressources arithmétiques dédiées qui sont disponibles dans une FPGA est une tâche difficile qui requiert beaucoup de temps. Seulement les spécialistes dans le design de circuits peuvent le faire. Ce projet est fondé sur un tissu de calcul générique contrôlé par les données qui a été proposé par le professeur J.P David et a déjà été implémenté par un étudiant à la maîtrise M. Allard. Cette architecture est principalement formée de trois composants: l’unité arithmétique et logique partagée (Shared Arithmetic Logic Unit –SALU-), la machine à état pour le jeton des données (Token State Machine –TSM-) et la banque de FIFO (FIFO Bank –FB-). Cette architecture est semblable aux architectures reconfigurables à large grain (Coarse-Grained Reconfigurable Architecture-CGRAs-), mais contrôlée par les données.----------ABSTRACT Coarse-grained reconfigurable computing architectures have become an important research topic because of their high potential to accelerate a wide range of applications. These architectures apply the concurrent nature of hardware architecture to accelerate computations. Substantially, coarse-grained reconfigurable computing architectures can fill up existing gaps between FPGAs and processor. They typically contrast with Application Specific Integrated Circuits (ASICs) in connection with performance and flexibility. Programming reconfigurable computing architectures is a long-standing challenge, and it is yet extremely inconvenient. Programmers must be aware of hardware features and also it is assumed that they have a good knowledge of hardware description languages such as VHDL and Verilog, instead of the sequential programming paradigm. Implementing an algorithm on FPGA is intrinsically more difficult than programming a processor or a GPU. Processor-based implementations “only” require a program to control their pre-synthesized data path, while an FPGA requires that a designer creates a new data path and a new controller for each application. Nevertheless, conceiving an architecture that best exploits the millions of logic cells and the thousands of dedicated arithmetic resources available in an FPGA is a time-consuming challenge that only talented experts in circuit design can handle. This project is founded on the generic data-driven compute fabric proposed by Prof. J.P. David and implemented by M. Allard, a previous master student. This architecture is composed of three main individual components: the Shared Arithmetic Logic Unit (SALU), the Token State Machine (TSM) and the FIFO Bank (FB). The architecture is somewhat similar to Coarse-Grained Reconfigurable Architectures (CGRAs), but it is data-driven. Indeed, in that architecture, register banks are replaced by FBs and the controllers are TSMs. The operations start as soon as the operands are available in the FIFOs that contain the operands. Data travel from FBs to FBs through the SALU, as programmed in the configuration memory of the TSMs. Final results return in FIFOs

Embedded electronic systems driven by run-time reconfigurable hardware

Abstract This doctoral thesis addresses the design of embedded electronic systems based on run-time reconfigurable hardware technology –available through SRAM-based FPGA/SoC devices– aimed at contributing to enhance the life quality of the human beings. This work does research on the conception of the system architecture and the reconfiguration engine that provides to the FPGA the capability of dynamic partial reconfiguration in order to synthesize, by means of hardware/software co-design, a given application partitioned in processing tasks which are multiplexed in time and space, optimizing thus its physical implementation –silicon area, processing time, complexity, flexibility, functional density, cost and power consumption– in comparison with other alternatives based on static hardware (MCU, DSP, GPU, ASSP, ASIC, etc.). The design flow of such technology is evaluated through the prototyping of several engineering applications (control systems, mathematical coprocessors, complex image processors, etc.), showing a high enough level of maturity for its exploitation in the industry.Resumen Esta tesis doctoral abarca el diseño de sistemas electrónicos embebidos basados en tecnología hardware dinámicamente reconfigurable –disponible a través de dispositivos lógicos programables SRAM FPGA/SoC– que contribuyan a la mejora de la calidad de vida de la sociedad. Se investiga la arquitectura del sistema y del motor de reconfiguración que proporcione a la FPGA la capacidad de reconfiguración dinámica parcial de sus recursos programables, con objeto de sintetizar, mediante codiseño hardware/software, una determinada aplicación particionada en tareas multiplexadas en tiempo y en espacio, optimizando así su implementación física –área de silicio, tiempo de procesado, complejidad, flexibilidad, densidad funcional, coste y potencia disipada– comparada con otras alternativas basadas en hardware estático (MCU, DSP, GPU, ASSP, ASIC, etc.). Se evalúa el flujo de diseño de dicha tecnología a través del prototipado de varias aplicaciones de ingeniería (sistemas de control, coprocesadores aritméticos, procesadores de imagen, etc.), evidenciando un nivel de madurez viable ya para su explotación en la industria.Resum Aquesta tesi doctoral està orientada al disseny de sistemes electrònics empotrats basats en tecnologia hardware dinàmicament reconfigurable –disponible mitjançant dispositius lògics programables SRAM FPGA/SoC– que contribueixin a la millora de la qualitat de vida de la societat. S’investiga l’arquitectura del sistema i del motor de reconfiguració que proporcioni a la FPGA la capacitat de reconfiguració dinàmica parcial dels seus recursos programables, amb l’objectiu de sintetitzar, mitjançant codisseny hardware/software, una determinada aplicació particionada en tasques multiplexades en temps i en espai, optimizant així la seva implementació física –àrea de silici, temps de processat, complexitat, flexibilitat, densitat funcional, cost i potència dissipada– comparada amb altres alternatives basades en hardware estàtic (MCU, DSP, GPU, ASSP, ASIC, etc.). S’evalúa el fluxe de disseny d’aquesta tecnologia a través del prototipat de varies aplicacions d’enginyeria (sistemes de control, coprocessadors aritmètics, processadors d’imatge, etc.), demostrant un nivell de maduresa viable ja per a la seva explotació a la indústria

Power and Energy Aware Heterogeneous Computing Platform

During the last decade, wireless technologies have experienced significant development, most notably in the form of mobile cellular radio evolution from GSM to UMTS/HSPA and thereon to Long-Term Evolution (LTE) for increasing the capacity and speed of wireless data networks. Considering the real-time constraints of the new wireless standards and their demands for parallel processing, reconfigurable architectures and in particular, multicore platforms are part of the most successful platforms due to providing high computational parallelism and throughput. In addition to that, by moving toward Internet-of-Things (IoT), the number of wireless sensors and IP-based high throughput network routers is growing at a rapid pace. Despite all the progression in IoT, due to power and energy consumption, a single chip platform for providing multiple communication standards and a large processing bandwidth is still missing.The strong demand for performing different sets of operations by the embedded systems and increasing the computational performance has led to the use of heterogeneous multicore architectures with the help of accelerators for computationally-intensive data-parallel tasks acting as coprocessors. Currently, highly heterogeneous systems are the most power-area efficient solution for performing complex signal processing systems. Additionally, the importance of IoT has increased significantly the need for heterogeneous and reconfigurable platforms.On the other hand, subsequent to the breakdown of the Dennardian scaling and due to the enormous heat dissipation, the performance of a single chip was obstructed by the utilization wall since all cores cannot be clocked at their maximum operating frequency. Therefore, a thermal melt-down might be happened as a result of high instantaneous power dissipation. In this context, a large fraction of the chip, which is switched-off (Dark) or operated at a very low frequency (Dim) is called Dark Silicon. The Dark Silicon issue is a constraint for the performance of computers, especially when the up-coming IoT scenario will demand a very high performance level with high energy efficiency. Among the suggested solution to combat the problem of Dark-Silicon, the use of application-specific accelerators and in particular Coarse-Grained Reconfigurable Arrays (CGRAs) are the main motivation of this thesis work.This thesis deals with design and implementation of Software Defined Radio (SDR) as well as High Efficiency Video Coding (HEVC) application-specific accelerators for computationally intensive kernels and data-parallel tasks. One of the most important data transmission schemes in SDR due to its ability of providing high data rates is Orthogonal Frequency Division Multiplexing (OFDM). This research work focuses on the evaluation of Heterogeneous Accelerator-Rich Platform (HARP) by implementing OFDM receiver blocks as designs for proof-of-concept. The HARP template allows the designer to instantiate a heterogeneous reconfigurable platform with a very large amount of custom-tailored computational resources while delivering a high performance in terms of many high-level metrics. The availability of this platform lays an excellent foundation to investigate techniques and methods to replace the Dark or Dim part of chip with high-performance silicon dissipating very low power and energy. Furthermore, this research work is also addressing the power and energy issues of the embedded computing systems by tailoring the HARP for self-aware and energy-aware computing models. In this context, the instantaneous power dissipation and therefore the heat dissipation of HARP are mitigated on FPGA/ASIC by using Dynamic Voltage and Frequency Scaling (DVFS) to minimize the dark/dim part of the chip. Upgraded HARP for self-aware and energy-aware computing can be utilized as an energy-efficient general-purpose transceiver platform that is cognitive to many radio standards and can provide high throughput while consuming as little energy as possible. The evaluation of HARP has shown promising results, which makes it a suitable platform for avoiding Dark Silicon in embedded computing platforms and also for diverse needs of IoT communications.In this thesis, the author designed the blocks of OFDM receiver by crafting templatebased CGRA devices and then attached them to HARP’s Network-on-Chip (NoC) nodes. The performance of application-specific accelerators generated from templatebased CGRAs, the performance of the entire platform subsequent to integrating the CGRA nodes on HARP and the NoC traffic are recorded in terms of several highlevel performance metrics. In evaluating HARP on FPGA prototype, it delivers a performance of 0.012 GOPS/mW. Because of the scalability and regularity in HARP, the author considered its value as architectural constant. In addition to showing the gain and the benefits of maximizing the number of reconfigurable processing resources on a platform in comparison to the scaled performance of several state-of-the-art platforms, HARP’s architectural constant ensures application-independent figure of merit. HARP is further evaluated by implementing various sizes of Discrete Cosine transform (DCT) and Discrete Sine Transform (DST) dedicated for HEVC standard, which showed its ability to sustain Full HD 1080p format at 30 fps on FPGA. The author also integrated self-aware computing model in HARP to mitigate the power dissipation of an OFDM receiver. In the case of FPGA implementation, the total power dissipation of the platform showed 16.8% reduction due to employing the Feedback Control System (FCS) technique with Dynamic Frequency Scaling (DFS). Furthermore, by moving to ASIC technology and scaling both frequency and voltage simultaneously, significant dynamic power reduction (up to 82.98%) was achieved, which proved the DFS/DVFS techniques as one step forward to mitigate the Dark Silicon issue

IXIAM: ISA EXtension for Integrated Accelerator Management

During the last few years, hardware accelerators have been gaining popularity thanks to their ability to achieve higher performance and efficiency than classic general-purpose solutions. They are fundamentally shaping the current generations of Systems-on-Chip (SoCs), which are becoming increasingly heterogeneous. However, despite their widespread use, a standard, general solution to manage them while providing speed and consistency has not yet been found. Common methodologies rely on OS mediation and a mix of user-space and kernel-space drivers, which can be inefficient, especially for fine-grained tasks. This paper addresses these sources of inefficiencies by proposing an ISA eXtension for Integrated Accelerator Management (IXIAM), a cost-effective HW-SW framework to control a wide variety of accelerators in a standard way, and directly from the cores. The proposed instructions include reservation, work offloading, data transfer, and synchronization. They can be wrapped in a high-level software API or even integrated into a compiler. IXIAM features also a user-space interrupt mechanism to signal events directly to the user process. We implement it as a RISC-V extension in the gem5 simulator and demonstrate detailed support for complex accelerators, as well as the ability to specify sequences of memory transfers and computations directly from the ISA and with significantly lower overhead than driver-based schemes. IXIAM provides a performance advantage that is more evident for small and medium workloads, reaching around 90x in the best case. This way, we enlarge the set of workloads that would benefit from hardware acceleration

Integrated Programmable-Array accelerator to design heterogeneous ultra-low power manycore architectures

There is an ever-increasing demand for energy efficiency (EE) in rapidly evolving Internet-of-Things end nodes. This pushes researchers and engineers to develop solutions that provide both Application-Specific Integrated Circuit-like EE and Field-Programmable Gate Array-like flexibility. One such solution is Coarse Grain Reconfigurable Array (CGRA). Over the past decades, CGRAs have evolved and are competing to become mainstream hardware accelerators, especially for accelerating Digital Signal Processing (DSP) applications. Due to the over-specialization of computing architectures, the focus is shifting towards fitting an extensive data representation range into fewer bits, e.g., a 32-bit space can represent a more extensive data range with floating-point (FP) representation than an integer representation. Computation using FP representation requires numerous encodings and leads to complex circuits for the FP operators, decreasing the EE of the entire system. This thesis presents the design of an EE ultra-low-power CGRA with native support for FP computation by leveraging an emerging paradigm of approximate computing called transprecision computing. We also present the contributions in the compilation toolchain and system-level integration of CGRA in a System-on-Chip, to envision the proposed CGRA as an EE hardware accelerator. Finally, an extensive set of experiments using real-world algorithms employed in near-sensor processing applications are performed, and results are compared with state-of-the-art (SoA) architectures. It is empirically shown that our proposed CGRA provides better results w.r.t. SoA architectures in terms of power, performance, and area