Pose consensus based on dual quaternion algebra with application to decentralized formation control of mobile manipulators

This paper presents a solution based on dual quaternion algebra to the general problem of pose (i.e., position and orientation) consensus for systems composed of multiple rigid-bodies. The dual quaternion algebra is used to model the agents' poses and also in the distributed control laws, making the proposed technique easily applicable to time-varying formation control of general robotic systems. The proposed pose consensus protocol has guaranteed convergence when the interaction among the agents is represented by directed graphs with directed spanning trees, which is a more general result when compared to the literature on formation control. In order to illustrate the proposed pose consensus protocol and its extension to the problem of formation control, we present a numerical simulation with a large number of free-flying agents and also an application of cooperative manipulation by using real mobile manipulators

Research and development at ORNL/CESAR towards cooperating robotic systems for hazardous environments

One of the frontiers in intelligent machine research is the understanding of how constructive cooperation among multiple autonomous agents can be effected. The effort at the Center for Engineering Systems Advanced Research (CESAR) at the Oak Ridge National Laboratory (ORNL) focuses on two problem areas: (1) cooperation by multiple mobile robots in dynamic, incompletely known environments; and (2) cooperating robotic manipulators. Particular emphasis is placed on experimental evaluation of research and developments using the CESAR robot system testbeds, including three mobile robots, and a seven-axis, kinematically redundant mobile manipulator. This paper summarizes initial results of research addressing the decoupling of position and force control for two manipulators holding a common object, and the path planning for multiple robots in a common workspace

Control of an anthropomorphic manipulator involved in physical human-robot interaction

Dissertação de mestrado em Engenharia MecânicaThe objective of the dissertation is to flexibly control the end effector velocity of a redundant 7-DOF manipulator by using a differential kinematics approach, while ensuring the safety of the robotic arm from exceeding the physical limits of joints in terms of position, velocity and acceleration. The thesis also contributes with a real-time obstacle avoidance strategy for controlling anthropomorphic robotic arms in dynamic obstacle environments, taking account of sudden appearances or disappearances of mobile obstacles. A method for compensating force errors due to changes in the orientation of end effectors, independent from structures of force sensors, is developed to achieve high accuracy in force control applications. A novel method, the Virtual Elastic System, is proposed to control mobile manipulators for physical Human-Robot Interaction (pHRI) tasks in dynamic environments, which enables the combination of an Inverse Differential Kinematics for redundant robotic arms and a Dynamical Systems approach for nonholonomic mobile platforms. Experiments with a 7-DOF robotic arm, side-mounted on a nonholonomic mobile platform, are presented with the whole robot obstacle avoidance, proving the efficiency of the developed method in pHRI scenarios, more specifically, cooperative human-robot object transportation tasks in dynamic environments. Extensions of the method for other mobile manipulators with holonomic mobile platforms or higher degrees of freedom manipulators are also demonstrated through simulations

Robust Decentralized Abstractions for Multiple Mobile Manipulators

This paper addresses the problem of decentralized abstractions for multiple mobile manipulators with 2nd order dynamics. In particular, we propose decentralized controllers for the navigation of each agent among predefined regions of interest in the workspace, while guaranteeing at the same time inter-agent collision avoidance and connectivity maintenance for a subset of initially connected agents. In that way, the motion of the coupled multi-agent system is abstracted into multiple finite transition systems for each agent, which are then suitable for the application of temporal logic-based high level plans. The proposed methodology is decentralized, since each agent uses local information based on limited sensing capabilities. Finally, simulation studies verify the validity of the approach.Comment: Accepted for publication in the IEEE Conference on Decision and Control, Melbourne, Australia, 201

The effects of speed cameras: How drivers respond

This study set out to examine the effects and effectiveness of various strategies related to the deployment of speed cameras, and to explore how different types of driver responded to cameras and perceived their operation. Recommendations for best deployment were to be considered. It was carried out between 1993 and 1996 after the Road Traffic Act 1991 authorised the use of automatic speed devices for the detection of offences. A series of 12 surveys arranged in five sets and having some cross-sectional and some longitudinal elements was undertaken together with some depth interviews, and self-report measures predominated. Five police forces helped to set up the research. In total 6879 drivers took part. The particular interventions focused upon comprised camera signing alone; two kinds of publicity campaign linked with speed camera deployment; prosecution following detection by speed camera; and the effects of cameras when first installed and over time.The Department of Environment, Transport and the Regions

Stiffness Analysis Of Multi-Chain Parallel Robotic Systems

The paper presents a new stiffness modelling method for multi-chain parallel robotic manipulators with flexible links and compliant actuating joints. In contrast to other works, the method involves a FEA-based link stiffness evaluation and employs a new solution strategy of the kinetostatic equations, which allows computing the stiffness matrix for singular postures and to take into account influence of the external forces. The advantages of the developed technique are confirmed by application examples, which deal with stiffness analysis of a parallel manipulator of the Orthoglide famil