Parallel and distributed cyber-physical system simulation

textThe traditions of real-time and embedded system engineering have evolved into a new field of cyber-physical systems (CPSs). The increase in complexity of CPS components and the multi-domain engineering composition of CPSs challenge the current best practices in design and simulation. To address the challenges of CPS simulation, this work introduces a simulator coordination method drawing from strengths of the field of parallel and distributed simulation (PADS), yet offering benefits aimed towards the challenges of coordinating CPS engineering design simulators. The method offers the novel concept of Interpolated Event data types applied to Kahn Process Networks in order to provide simulator coordination. This can enable conservative and optimistic coordination of multiple heterogeneous and homogeneous simulators, but provide important benefits for CPS simulation, such as the opportunity to reduce functional requirements for simulator interfacing compared to existing solutions. The method is analyzed in theoretical properties and instantiated in software tools SimConnect and SimTalk. Finally, an experimental study applies the method and tools to accelerate Spice circuit simulation with tradeoffs in speed versus accuracy, and demonstrates the coordination of three heterogeneous simulators for a CPS simulation with increasing component model refinement and realism.Electrical and Computer Engineerin

Mega-modeling of complex, distributed, heterogeneous CPS systems

Model-Driven Design (MDD) has proven to be a powerful technology to address the development of increasingly complex embedded systems. Beyond complexity itself, challenges come from the need to deal with parallelism and heterogeneity. System design must target different execution platforms with different OSs and HW resources, even bare-metal, support local and distributed systems, and integrate on top of these heterogeneous platforms multiple functional component coming from different sources (developed from scratch, legacy code and third-party code), with different behaviors operating under different models of computation and communication. Additionally, system optimization to improve performance, power consumption, cost, etc. requires analyzing huge lists of possible design solutions. Addressing these challenges require flexible design technologies able to support from a single-source model its architectural mapping to different computing resources, of different kind and in different platforms. Traditional MDD methods and tools typically rely on fixed elements, which makes difficult their integration under this variability. For example, it is unlikely to integrate in the same system legacy code with a third-party component. Usually some re-coding is required to enable such interconnection. This paper proposes a UML/MARTE system modeling methodology able to address the challenges mentioned above by improving flexibility and scalability. This approach is illustrated and demonstrated on a flight management system. The model is flexible enough to be adapted to different architectural solutions with a minimal effort by changing its underlying Model of Computation and Communication (MoCC). Being completely platform independent, from the same model it is possible to explore various solutions on different execution platforms.This work has been partially funded by the EU and the Spanish MICINN through the ECSEL MegaMart and Comp4Drones projects and the TEC2017-86722-C4-3-R PLATINO project

Anpassen verteilter eingebetteter Anwendungen im laufenden Betrieb

The availability of third-party apps is among the key success factors for software ecosystems: The users benefit from more features and innovation speed, while third-party solution vendors can leverage the platform to create successful offerings. However, this requires a certain decoupling of engineering activities of the different parties not achieved for distributed control systems, yet. While late and dynamic integration of third-party components would be required, resulting control systems must provide high reliability regarding real-time requirements, which leads to integration complexity. Closing this gap would particularly contribute to the vision of software-defined manufacturing, where an ecosystem of modern IT-based control system components could lead to faster innovations due to their higher abstraction and availability of various frameworks. Therefore, this thesis addresses the research question: How we can use modern IT technologies and enable independent evolution and easy third-party integration of software components in distributed control systems, where deterministic end-to-end reactivity is required, and especially, how can we apply distributed changes to such systems consistently and reactively during operation? This thesis describes the challenges and related approaches in detail and points out that existing approaches do not fully address our research question. To tackle this gap, a formal specification of a runtime platform concept is presented in conjunction with a model-based engineering approach. The engineering approach decouples the engineering steps of component definition, integration, and deployment. The runtime platform supports this approach by isolating the components, while still offering predictable end-to-end real-time behavior. Independent evolution of software components is supported through a concept for synchronous reconfiguration during full operation, i.e., dynamic orchestration of components. Time-critical state transfer is supported, too, and can lead to bounded quality degradation, at most. The reconfiguration planning is supported by analysis concepts, including simulation of a formally specified system and reconfiguration, and analyzing potential quality degradation with the evolving dataflow graph (EDFG) method. A platform-specific realization of the concepts, the real-time container architecture, is described as a reference implementation. The model and the prototype are evaluated regarding their feasibility and applicability of the concepts by two case studies. The first case study is a minimalistic distributed control system used in different setups with different component variants and reconfiguration plans to compare the model and the prototype and to gather runtime statistics. The second case study is a smart factory showcase system with more challenging application components and interface technologies. The conclusion is that the concepts are feasible and applicable, even though the concepts and the prototype still need to be worked on in future -- for example, to reach shorter cycle times.Eine große Auswahl von Drittanbieter-Lösungen ist einer der Schlüsselfaktoren für Software Ecosystems: Nutzer profitieren vom breiten Angebot und schnellen Innovationen, während Drittanbieter über die Plattform erfolgreiche Lösungen anbieten können. Das jedoch setzt eine gewisse Entkopplung von Entwicklungsschritten der Beteiligten voraus, welche für verteilte Steuerungssysteme noch nicht erreicht wurde. Während Drittanbieter-Komponenten möglichst spät -- sogar Laufzeit -- integriert werden müssten, müssen Steuerungssysteme jedoch eine hohe Zuverlässigkeit gegenüber Echtzeitanforderungen aufweisen, was zu Integrationskomplexität führt. Dies zu lösen würde insbesondere zur Vision von Software-definierter Produktion beitragen, da ein Ecosystem für moderne IT-basierte Steuerungskomponenten wegen deren höherem Abstraktionsgrad und der Vielzahl verfügbarer Frameworks zu schnellerer Innovation führen würde. Daher behandelt diese Dissertation folgende Forschungsfrage: Wie können wir moderne IT-Technologien verwenden und unabhängige Entwicklung und einfache Integration von Software-Komponenten in verteilten Steuerungssystemen ermöglichen, wo Ende-zu-Ende-Echtzeitverhalten gefordert ist, und wie können wir insbesondere verteilte Änderungen an solchen Systemen konsistent und im Vollbetrieb vornehmen? Diese Dissertation beschreibt Herausforderungen und verwandte Ansätze im Detail und zeigt auf, dass existierende Ansätze diese Frage nicht vollständig behandeln. Um diese Lücke zu schließen, beschreiben wir eine formale Spezifikation einer Laufzeit-Plattform und einen zugehörigen Modell-basierten Engineering-Ansatz. Dieser Ansatz entkoppelt die Design-Schritte der Entwicklung, Integration und des Deployments von Komponenten. Die Laufzeit-Plattform unterstützt den Ansatz durch Isolation von Komponenten und zugleich Zeit-deterministischem Ende-zu-Ende-Verhalten. Unabhängige Entwicklung und Integration werden durch Konzepte für synchrone Rekonfiguration im Vollbetrieb unterstützt, also durch dynamische Orchestrierung. Dies beinhaltet auch Zeit-kritische Zustands-Transfers mit höchstens begrenzter Qualitätsminderung, wenn überhaupt. Rekonfigurationsplanung wird durch Analysekonzepte unterstützt, einschließlich der Simulation formal spezifizierter Systeme und Rekonfigurationen und der Analyse der etwaigen Qualitätsminderung mit dem Evolving Dataflow Graph (EDFG). Die Real-Time Container Architecture wird als Referenzimplementierung und Evaluationsplattform beschrieben. Zwei Fallstudien untersuchen Machbarkeit und Nützlichkeit der Konzepte. Die erste verwendet verschiedene Varianten und Rekonfigurationen eines minimalistischen verteilten Steuerungssystems, um Modell und Prototyp zu vergleichen sowie Laufzeitstatistiken zu erheben. Die zweite Fallstudie ist ein Smart-Factory-Demonstrator, welcher herausforderndere Applikationskomponenten und Schnittstellentechnologien verwendet. Die Konzepte sind den Studien nach machbar und nützlich, auch wenn sowohl die Konzepte als auch der Prototyp noch weitere Arbeit benötigen -- zum Beispiel, um kürzere Zyklen zu erreichen

A generic framework for process execution and secure multi-party transaction authorization

Process execution engines are not only an integral part of workflow and business process management systems but are increasingly used to build process-driven applications. In other words, they are potentially used in all kinds of software across all application domains. However, contemporary process engines and workflow systems are unsuitable for use in such diverse application scenarios for several reasons. The main shortcomings can be observed in the areas of interoperability, versatility, and programmability. Therefore, this thesis makes a step away from domain specific, monolithic workflow engines towards generic and versatile process runtime frameworks, which enable integration of process technology into all kinds of software. To achieve this, the idea and corresponding architecture of a generic and embeddable process virtual machine (ePVM), which supports defining process flows along the theoretical foundation of communicating extended finite state machines, are presented. The architecture focuses on the core process functionality such as control flow and state management, monitoring, persistence, and communication, while using JavaScript as a process definition language. This approach leads to a very generic yet easily programmable process framework. A fully functional prototype implementation of the proposed framework is provided along with multiple example applications. Despite the fact that business processes are increasingly automated and controlled by information systems, humans are still involved, directly or indirectly, in many of them. Thus, for process flows involving sensitive transactions, a highly secure authorization scheme supporting asynchronous multi-party transaction authorization must be available within process management systems. Therefore, along with the ePVM framework, this thesis presents a novel approach for secure remote multi-party transaction authentication - the zone trusted information channel (ZTIC). The ZTIC approach uniquely combines multiple desirable properties such as the highest level of security, ease-of-use, mobility, remote administration, and smooth integration with existing infrastructures into one device and method. Extensively evaluating both, the ePVM framework and the ZTIC, this thesis shows that ePVM in combination with the ZTIC approach represents a unique and very powerful framework for building workflow systems and process-driven applications including support for secure multi-party transaction authorization

Component-based control system development for agile manufacturing machine systems

It is now a common sense that manufactures including machine suppliers and system integrators of the 21 st century will need to compete on global marketplaces, which are frequently shifting and fragmenting, with new technologies continuously emerging. Future production machines and manufacturing systems need to offer the "agility" required in providing responsiveness to product changes and the ability to reconfigure. The primary aim for this research is to advance studies in machine control system design, in the context of the European project VIR-ENG - "Integrated Design, Simulation and Distributed Control of Agile Modular Machinery"