Novel Physical Layer Authentication Techniques for Secure Wireless Communications

Due to the open nature of radio propagation, information security in wireless communications has been facing more challenges compared to its counterpart in wired networks. Authentication, defined as an important aspect of information security, is the process of verifying the identity of transmitters to prevent against spoofing attacks. Traditionally, secure wireless communications is achieved by relying solely upon higher layer cryptographic mechanisms. However, cryptographic approaches based on complex mathematical calculations are inefficient and vulnerable to various types of attacks. Recently, researchers have shown that the unique properties of wireless channels can be exploited for authentication enhancement by providing additional security protection against spoofing attacks. Motivated by the vulnerability of existing higher-layer security techniques and the security advantages provided by exploring the physical link properties, five novel physical layer authentication techniques to enhance the security performance of wireless systems are proposed. The first technique exploits the inherent properties of CIR to achieve robust channel-based authentication. The second and third techniques utilize a long-range channel predictor and additional multipath delay characteristics, respectively, to enhance the CIR-based authentication. The fourth technique exploits the advantages of AF cooperative relaying to improve traditional channel-based authentication. The last technique employs an embedded confidential signaling link to secure the legitimate transmissions in OFDM systems

Subcarrier and Power Allocation in WiMAX

Worldwide Interoperability for Microwave Access (WiMAX) is one of the latest technologies for providing Broadband Wireless Access (BWA) in a metropolitan area. The use of orthogonal frequency division multiplexing (OFDM) transmissions has been proposed in WiMAX to mitigate the complications which are associated with frequency selective channels. In addition, the multiple access is achieved by using orthogonal frequency division multiple access (OFDMA) scheme which has several advantages such as flexible resource allocation, relatively simple transceivers, and high spectrum efficient. In OFDMA the controllable resources are the subcarriers and the allocated power per subband. Moreover, adaptive subcarrier and power allocation techniques have been selected to exploit the natural multiuser diversity. This leads to an improvement of the performance by assigning the proper subcarriers to the user according to their channel quality and the power is allocated based on water-filling algorithm. One simple method is to allocate subcarriers and powers equally likely between all users. It is well known that this method reduces the spectral efficiency of the system, hence, it is not preferred unless in some applications. In order to handle the spectral efficiency problem, in this thesis we discuss three novel resources allocation algorithms for the downlink of a multiuser OFDM system and analyze the algorithm performances based on capacity and fairness measurement. Our intensive simulations validate the algorithm performances.fi=Opinnäytetyö kokotekstinä PDF-muodossa.|en=Thesis fulltext in PDF format.|sv=Lärdomsprov tillgängligt som fulltext i PDF-format

Wireless Device Authentication Techniques Using Physical-Layer Device Fingerprint

Due to the open nature of the radio signal propagation medium, wireless communication is inherently more vulnerable to various attacks than wired communication. Consequently, communication security is always one of the critical concerns in wireless networks. Given that the sophisticated adversaries may cover up their malicious behaviors through impersonation of legitimate devices, reliable wireless authentication is becoming indispensable to prevent such impersonation-based attacks through verification of the claimed identities of wireless devices. Conventional wireless authentication is achieved above the physical layer using upper-layer identities and key-based cryptography. As a result, user authenticity can even be validated for the malicious attackers using compromised security key. Recently, many studies have proven that wireless devices can be authenticated by exploiting unique physical-layer characteristics. Compared to the key-based approach, the possession of such physical-layer characteristics is directly associated with the transceiver\u27s unique radio-frequency hardware and corresponding communication environment, which are extremely difficult to forge in practice. However, the reliability of physical-layer authentication is not always high enough. Due to the popularity of cooperative communications, effective implementation of physical-layer authentication in wireless relay systems is urgently needed. On the other hand, the integration with existing upper-layer authentication protocols still has many challenges, e.g., end-to-end authentication. This dissertation is motivated to develop novel physical-layer authentication techniques in addressing the aforementioned challenges. In achieving enhanced wireless authentication, we first specifically identify the technique challenges in authenticating cooperative amplify-and-forward (AF) relay. Since AF relay only works at the physical layer, all of the existing upper-layer authentication protocols are ineffective in identifying AF relay nodes. To solve this problem, a novel device fingerprint of AF relay consisting of wireless channel gains and in-phase and quadrature imbalances (IQI) is proposed. Using this device fingerprint, satisfactory authentication accuracy is achieved when the signal-to-noise ratio is high enough. Besides, the optimal AF relay identification system is studied to maximize the performance of identifying multiple AF relays in the low signal-to-noise regime and small IQI. The optimal signals for quadrature amplitude modulation and phase shift keying modulations are derived to defend against the repeated access attempts made by some attackers with specific IQIs. Exploring effective authentication enhancement technique is another key objective of this dissertation. Due to the fast variation of channel-based fingerprints as well as the limited range of device-specific fingerprints, the performance of physical-layer authentication is not always reliable. In light of this, the physical-layer authentication is enhanced in two aspects. On the one hand, the device fingerprinting can be strengthened by considering multiple characteristics. The proper characteristics selection strategy, measurement method and optimal weighted combination of the selected characteristics are investigated. On the other hand, the accuracy of fingerprint estimation and differentiation can be improved by exploiting diversity techniques. To be specific, cooperative diversity in the form of involving multiple collaborative receivers is used in differentiating both frequency-dependent and frequency-independent device fingerprints. As a typical combining method of the space diversity techniques, the maximal-ratio combining is also applied in the receiver side to combat the channel degeneration effect and increase the fingerprint-to-noise ratio. Given the inherent weaknesses of the widely utilized upper-layer authentication protocols, it is straightforward to consider physical-layer authentication as an effective complement to reinforce existing authentication schemes. To this end, a cross-layer authentication is designed to seamlessly integrate the physical-layer authentication with existing infrastructures and protocols. The specific problems such as physical-layer key generation as well as the end-to-end authentication in networks are investigated. In addition, the authentication complexity reduction is also studied. Through prediction, pre-sharing and reusing the physical-layer information, the authentication processing time can be significantly shortened

Design and Analysis of Reversible Data Hiding Using Hybrid Cryptographic and Steganographic approaches for Multiple Images

Data concealing is the process of including some helpful information on images. The majority of sensitive applications, such sending authentication data, benefit from data hiding. Reversible data hiding (RDH), also known as invertible or lossless data hiding in the field of signal processing, has been the subject of a lot of study. A piece of data that may be recovered from an image to disclose the original image is inserted into the image during the RDH process to generate a watermarked image. Lossless data hiding is being investigated as a strong and popular way to protect copyright in many sensitive applications, such as law enforcement, medical diagnostics, and remote sensing. Visible and invisible watermarking are the two types of watermarking algorithms. The watermark must be bold and clearly apparent in order to be visible. To be utilized for invisible watermarking, the watermark must be robust and visibly transparent. Reversible data hiding (RDH) creates a marked signal by encoding a piece of data into the host signal. Once the embedded data has been recovered, the original signal may be accurately retrieved. For photos shot in poor illumination, visual quality is more important than a high PSNR number. The DH method increases the contrast of the host picture while maintaining a high PSNR value. Histogram equalization may also be done concurrently by repeating the embedding process in order to relocate the top two bins in the input image's histogram for data embedding. It's critical to assess the images after data concealment to see how much the contrast has increased. Common picture quality assessments include peak signal to noise ratio (PSNR), relative structural similarity (RSS), relative mean brightness error (RMBE), relative entropy error (REE), relative contrast error (RCE), and global contrast factor (GCF). The main objective of this paper is to investigate the various quantitative metrics for evaluating contrast enhancement. The results show that the visual quality may be preserved by including a sufficient number of message bits in the input photographs