Electrical Design for Manufacturability Solutions: Fast Systematic Variation Analysis and Design Enhancement Techniques

The primary objectives in this research are to develop computer-aided design (CAD) tools for Design for Manufacturability (DFM) solutions that enable designers to conduct more rapid and more accurate systematic variation analysis, with different design enhancement techniques. Four main CAD tools are developed throughout my thesis. The first CAD tool facilitates a quantitative study of the impact of systematic variations for different circuits' electrical and geometrical behavior. This is accomplished by automatically performing an extensive analysis of different process variations (lithography and stress) and their dependency on the design context. Such a tool helps to explore and evaluate the systematic variation impact on any type of design. Secondly, solutions in the industry focus on the "design and then fix philosophy", or "fix during design philosophy", whereas the next CAD tool involves the "fix before design philosophy". Here, the standard cell library is characterized in different design contexts, different resolution enhancement techniques, and different process conditions, generating a fully DFM-aware standard cell library using a newly developed methodology that dramatically reduce the required number of silicon simulations. Several experiments are conducted on 65nm and 45nm designs, and demonstrate more robust and manufacturable designs that can be implemented by using the DFM-aware standard cell library. Thirdly, a novel electrical-aware hotspot detection solution is developed by using a device parameter-based matching technique since the state-of-the-art hotspot detection solutions are all geometrical based. This CAD tool proposes a new philosophy by detecting yield limiters, also known as hotspots, through the model parameters of the device, presented in the SPICE netlist. This novel hotspot detection methodology is tested and delivers extraordinary fast and accurate results. Finally, the existing DFM solutions, mainly address the digital designs. Process variations play an increasingly important role in the success of analog circuits. Knowledge of the parameter variances and their contribution patterns is crucial for a successful design process. This information is valuable to find solutions for many problems in design, design automation, testing, and fault tolerance. The fourth CAD solution, proposed in this thesis, introduces a variability-aware DFM solution that detects, analyze, and automatically correct hotspots for analog circuits

Managing Variability in VLSI Circuits.

Over the last two decades, Design for Manufacturing (DFM) has emerged as an essential field within the semiconductor industry. The main objective of DFM is to reduce and, if possible, eliminate variability in integrated circuits (ICs). Numerous techniques for managing variation have emerged throughout IC design: manufacturers design instruments with minute tolerances, process engineers calibrate and characterize a given process throughout its lifetime, and IC designers strive to model and characterize variability within their devices, libraries, and circuits. This dissertation focuses on the last of these three techniques and presents material relevant to managing variability within IC design. Since characterization and modeling are essential to the analysis and reduction of variation in modern-day designs, this dissertation begins by studying various correlation models used within Statistical Static Timing Analysis (SSTA). In the end, the study shows that using complex correlation models does not necessarily result in significant error reduction within SSTA, and that simple models (which only include die-to-die and random variation) can therefore be used to achieve similar accuracy with reduced overhead and run-time. Next, the variation models, themselves, are explored and a new critical dimension (CD) model is proposed which reduces standard deviation error in SSTA by ~3X. Finally, the focus changes from the timing analysis level and moves lower in the design hierarchy to the libraries and devices that comprise the backbone of IC design. The final three chapters study mechanical stress enhancement and discuss how to fully exploit the layout dependencies of mechanically stressed silicon. The first of these three chapters presents an optimization scheme that uses the layout dependencies of stress in conjunction with dual-threshold-voltage (Vth) assignment to decrease leakage power consumption by ~24%. Next, the second of the three chapters proposes a new standard cell library design methodology, called “STEEL.” STEEL provides average delay improvements of 11% over equivalent single-Vth implementations, while consuming 2.5X less leakage than the dual-Vth alternative. Finally, the stress enhanced studies (and this document) are concluded by a new optimization scheme that combines stress enhancement with gate length biasing to achieve 2.9X leakage power savings in IC designs without modifying Vth.Ph.D.Electrical EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttp://deepblue.lib.umich.edu/bitstream/2027.42/75947/1/btcline_1.pd

DFM Techniques for the Detection and Mitigation of Hotspots in Nanometer Technology

With the continuous scaling down of dimensions in advanced technology nodes, process variations are getting worse for each new node. Process variations have a large influence on the quality and yield of the designed and manufactured circuits. There is a growing need for fast and efficient techniques to characterize and mitigate the effects of different sources of process variations on the design's performance and yield. In this thesis we have studied the various sources of systematic process variations and their effects on the circuit, and the various methodologies to combat systematic process variation in the design space. We developed abstract and accurate process variability models, that would model systematic intra-die variations. The models convert the variation in process into variation in electrical parameters of devices and hence variation in circuit performance (timing and leakage) without the need for circuit simulation. And as the analysis and mitigation techniques are studied in different levels of the design ow, we proposed a flow for combating the systematic process variation in nano-meter CMOS technology. By calculating the effects of variability on the electrical performance of circuits we can gauge the importance of the accurate analysis and model-driven corrections. We presented an automated framework that allows the integration of circuit analysis with process variability modeling to optimize the computer intense process simulation steps and optimize the usage of variation mitigation techniques. And we used the results obtained from using this framework to develop a relation between layout regularity and resilience of the devices to process variation. We used these findings to develop a novel technique for fast detection of critical failures (hotspots) resulting from process variation. We showed that our approach is superior to other published techniques in both accuracy and predictability. Finally, we presented an automated method for fixing the lithography hotspots. Our method showed success rate of 99% in fixing hotspots

Design for manufacturing (DFM) in submicron VLSI design

As VLSI technology scales to 65nm and below, traditional communication between design and manufacturing becomes more and more inadequate. Gone are the days when designers simply pass the design GDSII file to the foundry and expect very good man¬ufacturing and parametric yield. This is largely due to the enormous challenges in the manufacturing stage as the feature size continues to shrink. Thus, the idea of DFM (Design for Manufacturing) is getting very popular. Even though there is no universally accepted definition of DFM, in my opinion, one of the major parts of DFM is to bring manufacturing information into the design stage in a way that is understood by designers. Consequently, designers can act on the information to improve both manufacturing and parametric yield. In this dissertation, I will present several attempts to reduce the gap between design and manufacturing communities: Alt-PSM aware standard cell designs, printability improve¬ment for detailed routing and the ASIC design flow with litho aware static timing analysis. Experiment results show that we can greatly improve the manufacturability of the designs and we can reduce design pessimism significantly for easier design closure

Regular cell design approach considering lithography-induced process variations

The deployment delays for EUVL, forces IC design to continue using 193nm wavelength lithography with innovative and costly techniques in order to faithfully print sub-wavelength features and combat lithography induced process variations. The effect of the lithography gap in current and upcoming technologies is to cause severe distortions due to optical diffraction in the printed patterns and thus degrading manufacturing yield. Therefore, a paradigm shift in layout design is mandatory towards more regular litho-friendly cell designs in order to improve line pattern resolution. However, it is still unclear the amount of layout regularity that can be introduced and how to measure the benefits and weaknesses of regular layouts. This dissertation is focused on searching the degree of layout regularity necessary to combat lithography variability and outperform the layout quality of a design. The main contributions that have been addressed to accomplish this objective are: (1) the definition of several layout design guidelines to mitigate lithography variability; (2) the proposal of a parametric yield estimation model to evaluate the lithography impact on layout design; (3) the development of a global Layout Quality Metric (LQM) including a Regularity Metric (RM) to capture the degree of layout regularity of a layout implementation and; (4) the creation of different layout architectures exploiting the benefits of layout regularity to outperform line-pattern resolution, referred as Adaptive Lithography Aware Regular Cell Designs (ALARCs). The first part of this thesis provides several regular layout design guidelines derived from lithography simulations so that several important lithography related variation sources are minimized. Moreover, a design level methodology, referred as gate biasing, is proposed to overcome systematic layout dependent variations, across-field variations and the non-rectilinear gate effect (NRG) applied to regular fabrics by properly configuring the drawn transistor channel length. The second part of this dissertation proposes a lithography yield estimation model to predict the amount of lithography distortion expected in a printed layout due to lithography hotspots with a reduced set of lithography simulations. An efficient lithography hotspot framework to identify the different layout pattern configurations, simplify them to ease the pattern analysis and classify them according to the lithography degradation predicted using lithography simulations is presented. The yield model is calibrated with delay measurements of a reduced set of identical test circuits implemented in a CMOS 40nm technology and thus actual silicon data is utilized to obtain a more realistic yield estimation. The third part of this thesis presents a configurable Layout Quality Metric (LQM) that considering several layout aspects provides a global evaluation of a layout design with a single score. The LQM can be leveraged by assigning different weights to each evaluation metric or by modifying the parameters under analysis. The LQM is here configured following two different set of partial metrics. Note that the LQM provides a regularity metric (RM) in order to capture the degree of layout regularity applied in a layout design. Lastly, this thesis presents different ALARC designs for a 40nm technology using different degrees of layout regularity and different area overheads. The quality of the gridded regular templates is demonstrated by automatically creating a library containing 266 cells including combinational and sequential cells and synthesizing several ITC'99 benchmark circuits. Note that the regular cell libraries only presents a 9\% area penalty compared to the 2D standard cell designs used for comparison and thus providing area competitive designs. The layout evaluation of benchmark circuits considering the LQM shows that regular layouts can outperform other 2D standard cell designs depending on the layout implementation.Los continuos retrasos en la implementación de la EUVL, fuerzan que el diseño de IC se realice mediante litografía de longitud de onda de 193 nm con innovadoras y costosas técnicas para poder combatir variaciones de proceso de litografía. La gran diferencia entre la longitud de onda y el tamaño de los patrones causa severas distorsiones debido a la difracción óptica en los patrones impresos y por lo tanto degradando el yield. En consecuencia, es necesario realizar un cambio en el diseño de layouts hacia diseños más regulares para poder mejorar la resolución de los patrones. Sin embargo, todavía no está claro el grado de regularidad que se debe introducir y como medir los beneficios y los perjuicios de los diseños regulares. El objetivo de esta tesis es buscar el grado de regularidad necesario para combatir las variaciones de litografía y mejorar la calidad del layout de un diseño. Las principales contribuciones para conseguirlo son: (1) la definición de diversas reglas de diseño de layout para mitigar las variaciones de litografía; (2) la propuesta de un modelo para estimar el yield paramétrico y así evaluar el impacto de la litografía en el diseño de layout; (3) el diseño de una métrica para analizar la calidad de un layout (LQM) incluyendo una métrica para capturar el grado de regularidad de un diseño (RM) y; (4) la creación de diferentes tipos de layout explotando los beneficios de la regularidad, referidos como Adaptative Lithography Aware Regular Cell Designs (ALARCs). La primera parte de la tesis, propone las diversas reglas de diseño para layouts regulares derivadas de simulaciones de litografía de tal manera que las fuentes de variación de litografía son minimizadas. Además, se propone una metodología de diseño para layouts regulares, referida como "gate biasing" para contrarrestar las variaciones sistemáticas dependientes del layout, las variaciones en la ventana de proceso del sistema litográfico y el efecto de puerta no rectilínea para configurar la longitud del canal del transistor correctamente. La segunda parte de la tesis, detalla el modelo de estimación del yield de litografía para predecir mediante un número reducido de simulaciones de litografía la cantidad de distorsión que se espera en un layout impreso debida a "hotspots". Se propone una eficiente metodología que identifica los distintos patrones de un layout, los simplifica para facilitar el análisis de los patrones y los clasifica en relación a la degradación predecida mediante simulaciones de litografía. El modelo de yield se calibra utilizando medidas de tiempo de un número reducido de idénticos circuitos de test implementados en una tecnología CMOS de 40nm y de esta manera, se utilizan datos de silicio para obtener una estimación realista del yield. La tercera parte de este trabajo, presenta una métrica para medir la calidad del layout (LQM), que considera diversos aspectos para dar una evaluación global de un diseño mediante un único valor. La LQM puede ajustarse mediante la asignación de diferentes pesos para cada métrica de evaluación o modificando los parámetros analizados. La LQM se configura mediante dos conjuntos de medidas diferentes. Además, ésta incluye una métrica de regularidad (RM) para capturar el grado de regularidad que se aplica en un diseño. Finalmente, esta disertación presenta los distintos diseños ALARC para una tecnología de 40nm utilizando diversos grados de regularidad y diferentes impactos en área. La calidad de estos diseños se demuestra creando automáticamente una librería de 266 celdas incluyendo celdas combinacionales y secuenciales y, sintetizando diversos circuitos ITC'99. Las librerías regulares solo presentan un 9% de impacto en área comparado con diseños de celdas estándar 2D y por tanto proponiendo diseños competitivos en área. La evaluación de los circuitos considerando la LQM muestra que los diseños regulares pueden mejorar otros diseños 2D dependiendo de la implementación del layout

Characterization and mitigation of process variation in digital circuits and systems

Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 2009.Cataloged from PDF version of thesis.Includes bibliographical references (p. 155-166).Process variation threatens to negate a whole generation of scaling in advanced process technologies due to performance and power spreads of greater than 30-50%. Mitigating this impact requires a thorough understanding of the variation sources, magnitudes and spatial components at the device, circuit and architectural levels. This thesis explores the impacts of variation at each of these levels and evaluates techniques to alleviate them in the context of digital circuits and systems. At the device level, we propose isolation and measurement of variation in the intrinsic threshold voltage of a MOSFET using sub-threshold leakage currents. Analysis of the measured data, from a test-chip implemented on a 0. 18[mu]m CMOS process, indicates that variation in MOSFET threshold voltage is a truly random process dependent only on device dimensions. Further decomposition of the observed variation reveals no systematic within-die variation components nor any spatial correlation. A second test-chip capable of characterizing spatial variation in digital circuits is developed and implemented in a 90nm triple-well CMOS process. Measured variation results show that the within-die component of variation is small at high voltages but is an increasing fraction of the total variation as power-supply voltage decreases. Once again, the data shows no evidence of within-die spatial correlation and only weak systematic components. Evaluation of adaptive body-biasing and voltage scaling as variation mitigation techniques proves voltage scaling is more effective in performance modification with reduced impact to idle power compared to body-biasing.(cont.) Finally, the addition of power-supply voltages in a massively parallel multicore processor is explored to reduce the energy required to cope with process variation. An analytic optimization framework is developed and analyzed; using a custom simulation methodology, total energy of a hypothetical 1K-core processor based on the RAW core is reduced by 6-16% with the addition of only a single voltage. Analysis of yield versus required energy demonstrates that a combination of disabling poor-performing cores and additional power-supply voltages results in an optimal trade-off between performance and energy.by Nigel Anthony Drego.Ph.D

A novel deep submicron bulk planar sizing strategy for low energy subthreshold standard cell libraries

Engineering andPhysical Science ResearchCouncil (EPSRC) and Arm Ltd for providing funding in the form of grants and studentshipsThis work investigates bulk planar deep submicron semiconductor physics in an attempt to improve standard cell libraries aimed at operation in the subthreshold regime and in Ultra Wide Dynamic Voltage Scaling schemes. The current state of research in the field is examined, with particular emphasis on how subthreshold physical effects degrade robustness, variability and performance. How prevalent these physical effects are in a commercial 65nm library is then investigated by extensive modeling of a BSIM4.5 compact model. Three distinct sizing strategies emerge, cells of each strategy are laid out and post-layout parasitically extracted models simulated to determine the advantages/disadvantages of each. Full custom ring oscillators are designed and manufactured. Measured results reveal a close correlation with the simulated results, with frequency improvements of up to 2.75X/2.43X obs erved for RVT/LVT devices respectively. The experiment provides the first silicon evidence of the improvement capability of the Inverse Narrow Width Effect over a wide supply voltage range, as well as a mechanism of additional temperature stability in the subthreshold regime. A novel sizing strategy is proposed and pursued to determine whether it is able to produce a superior complex circuit design using a commercial digital synthesis flow. Two 128 bit AES cores are synthesized from the novel sizing strategy and compared against a third AES core synthesized from a state-of-the-art subthreshold standard cell library used by ARM. Results show improvements in energy-per-cycle of up to 27.3% and frequency improvements of up to 10.25X. The novel subthreshold sizing strategy proves superior over a temperature range of 0 °C to 85 °C with a nominal (20 °C) improvement in energy-per-cycle of 24% and frequency improvement of 8.65X. A comparison to prior art is then performed. Valid cases are presented where the proposed sizing strategy would be a candidate to produce superior subthreshold circuits

Statistical circuit simulations - from ‘atomistic’ compact models to statistical standard cell characterisation

This thesis describes the development and application of statistical circuit simulation methodologies to analyse digital circuits subject to intrinsic parameter fluctuations. The specific nature of intrinsic parameter fluctuations are discussed, and we explain the crucial importance to the semiconductor industry of developing design tools which accurately account for their effects. Current work in the area is reviewed, and three important factors are made clear: any statistical circuit simulation methodology must be based on physically correct, predictive models of device variability; the statistical compact models describing device operation must be characterised for accurate transient analysis of circuits; analysis must be carried out on realistic circuit components. Improving on previous efforts in the field, we posit a statistical circuit simulation methodology which accounts for all three of these factors. The established 3-D Glasgow atomistic simulator is employed to predict electrical characteristics for devices aimed at digital circuit applications, with gate lengths from 35 nm to 13 nm. Using these electrical characteristics, extraction of BSIM4 compact models is carried out and their accuracy in performing transient analysis using SPICE is validated against well characterised mixed-mode TCAD simulation results for 35 nm devices. Static d.c. simulations are performed to test the methodology, and a useful analytic model to predict hard logic fault limitations on CMOS supply voltage scaling is derived as part of this work. Using our toolset, the effect of statistical variability introduced by random discrete dopants on the dynamic behaviour of inverters is studied in detail. As devices scaled, dynamic noise margin variation of an inverter is increased and higher output load or input slew rate improves the noise margins and its variation. Intrinsic delay variation based on CV/I delay metric is also compared using ION and IEFF definitions where the best estimate is obtained when considering ION and input transition time variations. Critical delay distribution of a path is also investigated where it is shown non-Gaussian. Finally, the impact of the cell input slew rate definition on the accuracy of the inverter cell timing characterisation in NLDM format is investigated

Reliability in the face of variability in nanometer embedded memories

In this thesis, we have investigated the impact of parametric variations on the behaviour of one performance-critical processor structure - embedded memories. As variations manifest as a spread in power and performance, as a first step, we propose a novel modeling methodology that helps evaluate the impact of circuit-level optimizations on architecture-level design choices. Choices made at the design-stage ensure conflicting requirements from higher-levels are decoupled. We then complement such design-time optimizations with a runtime mechanism that takes advantage of adaptive body-biasing to lower power whilst improving performance in the presence of variability. Our proposal uses a novel fully-digital variation tracking hardware using embedded DRAM (eDRAM) cells to monitor run-time changes in cache latency and leakage. A special fine-grain body-bias generator uses the measurements to generate an optimal body-bias that is needed to meet the required yield targets. A novel variation-tolerant and soft-error hardened eDRAM cell is also proposed as an alternate candidate for replacing existing SRAM-based designs in latency critical memory structures. In the ultra low-power domain where reliable operation is limited by the minimum voltage of operation (Vddmin), we analyse the impact of failures on cache functional margin and functional yield. Towards this end, we have developed a fully automated tool (INFORMER) capable of estimating memory-wide metrics such as power, performance and yield accurately and rapidly. Using the developed tool, we then evaluate the #effectiveness of a new class of hybrid techniques in improving cache yield through failure prevention and correction. Having a holistic perspective of memory-wide metrics helps us arrive at design-choices optimized simultaneously for multiple metrics needed for maintaining lifetime requirements