Enhanced snr-based admission control algorithm for vehicular ad-hoc network

Vehicular Ad-hoc Network (VANET) becomes a fundamental subcategory of mobile ad-hoc networks that provides vehicles to communicate with each other and with roadside infrastructure smartly. Data traffic in VANET can be categorized into safety and non-safety, where safety is a very critical point and non-safety is related to entertainment. Various VANET performance challenges are considered in terms of Quality of Service (QoS) which cause performance degradation as performance anomaly where high rates of vehicles wait for the low rates of vehicle transmitting time and starvation problem where some vehicles cannot transfer their data. Three main achievements have been accomplished. Starting with the impact of the increasing vehicle speed on performance anomaly problem consequences has been investigated. Followed by high-speed effects on data delivery is illustrated and how 802.11p has outperformed 802.11 in terms of data delivery is also demonstrated. Lastly, starvation problem is investigated where results showed increased data loss when vehicle nodes unable to deliver data correctly. Finally, a QoS-aware Signal to Noise Ratio (SNR) admission control mechanism (QASAC) is proposed to handle the performance anomaly problem while maintaining the QoS levels for high and low traffics. This can result in wasting throughput and cause data loss. The investigation results show that 802.11p has enhanced the number of dropped packets up to 70%. Also, the 802.11p end to end delay has decreased up to 12% less than the results of the 802.11 MAC protocol. The packet delivery ratio has been enhanced by up to 41% by 802.11p. The starvation problem investigation phase shows that 802.11p perform better than 802.11 which mainly affected by the increased speed of the vehicle. QASAC assigned different SNR values to different vehicles group based on the sending SNR values and in each group. Unlike recently proposed admission control in VANET networks, the proposed architecture differentiate between both high priority and low priority traffic QASAC has been compared against the latest SNR based admission control mechanism. QASAC has enhanced the performance of data delivery up to 23% in terms of data dropping rates for high priority traffic

Cooperation Strategies for Enhanced Connectivity at Home

WHILE AT HOME , USERS MAY EXPERIENCE A POOR I NTERNET SERVICE while being connected to their 802.11 Access Points (APs). The AP is just one component of the Internet Gateway (GW) that generally includes a backhaul connection (ADSL, fiber,etc..) and a router providing a LAN. The root cause of performance degradation may be poor/congested wireless channel between the user and the GW or congested/bandwidth limited backhaul connection. The latter is a serious issue for DSL users that are located far from the central office because the greater the distance the lesser the achievable physical datarate. Furthermore, the GW is one of the few devices in the home that is left always on, resulting in energy waste and electromagnetic pollution increase. This thesis proposes two strategies to enhance Internet connectivity at home by (i) creating a wireless resource sharing scheme through the federation and the coordination of neighboring GWs in order to achieve energy efficiency while avoiding congestion, (ii) exploiting different king of connectivities, i.e., the wired plus the cellular (3G/4G) connections, through the aggregation of the available bandwidth across multiple access technologies. In order to achieve the aforementioned strategies we study and develop: • A viable interference estimation technique for 802.11 BSSes that can be implemented on commodity hardware at the MAC layer, without requiring active measurements, changes in the 802.11 standard, cooperation from the wireless stations (WSs). We extend previous theoretical results on the saturation throughput in order to quantify the impact in term of throughput loss of any kind of interferer. We im- plement and extensively evaluate our estimation technique with a real testbed and with different kind of interferer, achieving always good accuracy. • Two available bandwidth estimation algorithms for 802.11 BSSes that rely only on passive measurements and that account for different kind of interferers on the ISM band. This algorithms can be implemented on commodity hardware, as they require only software modifications. The first algorithm applies to intra-GW while the second one applies to inter-GW available bandwidth estimation. Indeed, we use the first algorithm to compute the metric for assessing the Wi-Fi load of a GW and the second one to compute the metric to decide whether accept incoming WSs from neighboring GWs or not. Note that in the latter case it is assumed that one or more WSs with known traffic profile are requested to relocate from one GW to another one. We evaluate both algorithms with simulation as well as with a real test-bed for different traffic patterns, achieving high precision. • A fully distributed and decentralized inter-access point protocol for federated GWs that allows to dynamically manage the associations of the wireless stations (WSs) in the federated network in order to achieve energy efficiency and offloading con- gested GWs, i.e, we keep a minimum number of GWs ON while avoiding to create congestion and real-time throughput loss. We evaluate this protocol in a federated scenario, using both simulation and a real test-bed, achieving up to 65% of energy saving in the simulated setting. We compare the energy saving achieved by our protocol against a centralized optimal scheme, obtaining close to optimal results. • An application level solution that accelerates slow ADSL connections with the parallel use of cellular (3G/4G) connections. We study the feasibility and the potential performance of this scheme at scale using both extensive throughput measurement of the cellular network and trace driven analysis. We validate our solution by implementing a real test bed and evaluating it “in the wild, at several residential locations of a major European city. We test two applications: Video-on-Demand (VoD) and picture upload, obtaining remarkable throughput increase for both applications at all locations. Our implementation features a multipath scheduler which we compare to other scheduling policies as well as to transport level solution like MTCP, obtaining always better results

Interoperability of wireless communication technologies in hybrid networks: Evaluation of end-to-end interoperability issues and quality of service requirements

This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel University.Hybrid Networks employing wireless communication technologies have nowadays brought closer the vision of communication “anywhere, any time with anyone”. Such communication technologies consist of various standards, protocols, architectures, characteristics, models, devices, modulation and coding techniques. All these different technologies naturally may share some common characteristics, but there are also many important differences. New advances in these technologies are emerging very rapidly, with the advent of new models, characteristics, protocols and architectures. This rapid evolution imposes many challenges and issues to be addressed, and of particular importance are the interoperability issues of the following wireless technologies: Wireless Fidelity (Wi-Fi) IEEE802.11, Worldwide Interoperability for Microwave Access (WiMAX) IEEE 802.16, Single Channel per Carrier (SCPC), Digital Video Broadcasting of Satellite (DVB-S/DVB-S2), and Digital Video Broadcasting Return Channel through Satellite (DVB-RCS). Due to the differences amongst wireless technologies, these technologies do not generally interoperate easily with each other because of various interoperability and Quality of Service (QoS) issues. The aim of this study is to assess and investigate end-to-end interoperability issues and QoS requirements, such as bandwidth, delays, jitter, latency, packet loss, throughput, TCP performance, UDP performance, unicast and multicast services and availability, on hybrid wireless communication networks (employing both satellite broadband and terrestrial wireless technologies). The thesis provides an introduction to wireless communication technologies followed by a review of previous research studies on Hybrid Networks (both satellite and terrestrial wireless technologies, particularly Wi-Fi, WiMAX, DVB-RCS, and SCPC). Previous studies have discussed Wi-Fi, WiMAX, DVB-RCS, SCPC and 3G technologies and their standards as well as their properties and characteristics, such as operating frequency, bandwidth, data rate, basic configuration, coverage, power, interference, social issues, security problems, physical and MAC layer design and development issues. Although some previous studies provide valuable contributions to this area of research, they are limited to link layer characteristics, TCP performance, delay, bandwidth, capacity, data rate, and throughput. None of the studies cover all aspects of end-to-end interoperability issues and QoS requirements; such as bandwidth, delay, jitter, latency, packet loss, link performance, TCP and UDP performance, unicast and multicast performance, at end-to-end level, on Hybrid wireless networks. Interoperability issues are discussed in detail and a comparison of the different technologies and protocols was done using appropriate testing tools, assessing various performance measures including: bandwidth, delay, jitter, latency, packet loss, throughput and availability testing. The standards, protocol suite/ models and architectures for Wi-Fi, WiMAX, DVB-RCS, SCPC, alongside with different platforms and applications, are discussed and compared. Using a robust approach, which includes a new testing methodology and a generic test plan, the testing was conducted using various realistic test scenarios on real networks, comprising variable numbers and types of nodes. The data, traces, packets, and files were captured from various live scenarios and sites. The test results were analysed in order to measure and compare the characteristics of wireless technologies, devices, protocols and applications. The motivation of this research is to study all the end-to-end interoperability issues and Quality of Service requirements for rapidly growing Hybrid Networks in a comprehensive and systematic way. The significance of this research is that it is based on a comprehensive and systematic investigation of issues and facts, instead of hypothetical ideas/scenarios or simulations, which informed the design of a test methodology for empirical data gathering by real network testing, suitable for the measurement of hybrid network single-link or end-to-end issues using proven test tools. This systematic investigation of the issues encompasses an extensive series of tests measuring delay, jitter, packet loss, bandwidth, throughput, availability, performance of audio and video session, multicast and unicast performance, and stress testing. This testing covers most common test scenarios in hybrid networks and gives recommendations in achieving good end-to-end interoperability and QoS in hybrid networks. Contributions of study include the identification of gaps in the research, a description of interoperability issues, a comparison of most common test tools, the development of a generic test plan, a new testing process and methodology, analysis and network design recommendations for end-to-end interoperability issues and QoS requirements. This covers the complete cycle of this research. It is found that UDP is more suitable for hybrid wireless network as compared to TCP, particularly for the demanding applications considered, since TCP presents significant problems for multimedia and live traffic which requires strict QoS requirements on delay, jitter, packet loss and bandwidth. The main bottleneck for satellite communication is the delay of approximately 600 to 680 ms due to the long distance factor (and the finite speed of light) when communicating over geostationary satellites. The delay and packet loss can be controlled using various methods, such as traffic classification, traffic prioritization, congestion control, buffer management, using delay compensator, protocol compensator, developing automatic request technique, flow scheduling, and bandwidth allocation

Radio Communications

In the last decades the restless evolution of information and communication technologies (ICT) brought to a deep transformation of our habits. The growth of the Internet and the advances in hardware and software implementations modified our way to communicate and to share information. In this book, an overview of the major issues faced today by researchers in the field of radio communications is given through 35 high quality chapters written by specialists working in universities and research centers all over the world. Various aspects will be deeply discussed: channel modeling, beamforming, multiple antennas, cooperative networks, opportunistic scheduling, advanced admission control, handover management, systems performance assessment, routing issues in mobility conditions, localization, web security. Advanced techniques for the radio resource management will be discussed both in single and multiple radio technologies; either in infrastructure, mesh or ad hoc networks

Interoperability of wireless communication technologies in hybrid networks : evaluation of end-to-end interoperability issues and quality of service requirements

Hybrid Networks employing wireless communication technologies have nowadays brought closer the vision of communication “anywhere, any time with anyone”. Such communication technologies consist of various standards, protocols, architectures, characteristics, models, devices, modulation and coding techniques. All these different technologies naturally may share some common characteristics, but there are also many important differences. New advances in these technologies are emerging very rapidly, with the advent of new models, characteristics, protocols and architectures. This rapid evolution imposes many challenges and issues to be addressed, and of particular importance are the interoperability issues of the following wireless technologies: Wireless Fidelity (Wi-Fi) IEEE802.11, Worldwide Interoperability for Microwave Access (WiMAX) IEEE 802.16, Single Channel per Carrier (SCPC), Digital Video Broadcasting of Satellite (DVB-S/DVB-S2), and Digital Video Broadcasting Return Channel through Satellite (DVB-RCS). Due to the differences amongst wireless technologies, these technologies do not generally interoperate easily with each other because of various interoperability and Quality of Service (QoS) issues. The aim of this study is to assess and investigate end-to-end interoperability issues and QoS requirements, such as bandwidth, delays, jitter, latency, packet loss, throughput, TCP performance, UDP performance, unicast and multicast services and availability, on hybrid wireless communication networks (employing both satellite broadband and terrestrial wireless technologies). The thesis provides an introduction to wireless communication technologies followed by a review of previous research studies on Hybrid Networks (both satellite and terrestrial wireless technologies, particularly Wi-Fi, WiMAX, DVB-RCS, and SCPC). Previous studies have discussed Wi-Fi, WiMAX, DVB-RCS, SCPC and 3G technologies and their standards as well as their properties and characteristics, such as operating frequency, bandwidth, data rate, basic configuration, coverage, power, interference, social issues, security problems, physical and MAC layer design and development issues. Although some previous studies provide valuable contributions to this area of research, they are limited to link layer characteristics, TCP performance, delay, bandwidth, capacity, data rate, and throughput. None of the studies cover all aspects of end-to-end interoperability issues and QoS requirements; such as bandwidth, delay, jitter, latency, packet loss, link performance, TCP and UDP performance, unicast and multicast performance, at end-to-end level, on Hybrid wireless networks. Interoperability issues are discussed in detail and a comparison of the different technologies and protocols was done using appropriate testing tools, assessing various performance measures including: bandwidth, delay, jitter, latency, packet loss, throughput and availability testing. The standards, protocol suite/ models and architectures for Wi-Fi, WiMAX, DVB-RCS, SCPC, alongside with different platforms and applications, are discussed and compared. Using a robust approach, which includes a new testing methodology and a generic test plan, the testing was conducted using various realistic test scenarios on real networks, comprising variable numbers and types of nodes. The data, traces, packets, and files were captured from various live scenarios and sites. The test results were analysed in order to measure and compare the characteristics of wireless technologies, devices, protocols and applications. The motivation of this research is to study all the end-to-end interoperability issues and Quality of Service requirements for rapidly growing Hybrid Networks in a comprehensive and systematic way. The significance of this research is that it is based on a comprehensive and systematic investigation of issues and facts, instead of hypothetical ideas/scenarios or simulations, which informed the design of a test methodology for empirical data gathering by real network testing, suitable for the measurement of hybrid network single-link or end-to-end issues using proven test tools. This systematic investigation of the issues encompasses an extensive series of tests measuring delay, jitter, packet loss, bandwidth, throughput, availability, performance of audio and video session, multicast and unicast performance, and stress testing. This testing covers most common test scenarios in hybrid networks and gives recommendations in achieving good end-to-end interoperability and QoS in hybrid networks. Contributions of study include the identification of gaps in the research, a description of interoperability issues, a comparison of most common test tools, the development of a generic test plan, a new testing process and methodology, analysis and network design recommendations for end-to-end interoperability issues and QoS requirements. This covers the complete cycle of this research. It is found that UDP is more suitable for hybrid wireless network as compared to TCP, particularly for the demanding applications considered, since TCP presents significant problems for multimedia and live traffic which requires strict QoS requirements on delay, jitter, packet loss and bandwidth. The main bottleneck for satellite communication is the delay of approximately 600 to 680 ms due to the long distance factor (and the finite speed of light) when communicating over geostationary satellites. The delay and packet loss can be controlled using various methods, such as traffic classification, traffic prioritization, congestion control, buffer management, using delay compensator, protocol compensator, developing automatic request technique, flow scheduling, and bandwidth allocation.EThOS - Electronic Theses Online ServiceGBUnited Kingdo

Networks, Communication, and Computing Vol. 2

Networks, communications, and computing have become ubiquitous and inseparable parts of everyday life. This book is based on a Special Issue of the Algorithms journal, and it is devoted to the exploration of the many-faceted relationship of networks, communications, and computing. The included papers explore the current state-of-the-art research in these areas, with a particular interest in the interactions among the fields

Walking Speed Detection from 5G prototype System

While most RF-sensing approaches proposed in the literature rely on short-distance indoor point-to-point instrumentation, actual large-scale installation of RF sensing suggests the use of ubiquitously available cellular systems. In particular, the 5th generation of the wireless communication standard (5G) is envisioned as a universal communication means also for Internet of Things devices. This thesis presents an investigation of device-free environmental perception capabilities in a 5G prototype system in two cases; walking speed and human presence detection, and elaborate a comparison with the former case and acceleration sensing analysis. This thesis attempts to analyze the perception capabilities of 5G system in order to recognize human mostly common activities and presence detection near transceiver devices which the instrumentation exploits a device-free system capable of detect activities without carrying devices capitalizing on environmental RF-noise. This is done via the study of existing and related literature. After that, the implementation and evaluation of walking speed and presence detection is described in details. In addition, evaluation consists of utilizing a prototypical 5G system with 52 OFDM carriers over 12.48 MHz bandwidth at 3.45 GHz, which we consider the impact of the number and choice of channels and compare the recognition performance with acceleration-based sensing. It was concluded that in realistic settings with five subjects, accurate recognition of activities and environmental situations can be a reliable implicit service of future 5G installations

Development and evaluation of smartphone-based ITS applications for vehicular networks

[ES] Una de las áreas de investigación que está recibiendo más atención recientemente es la de vehículos autónomos. Los investigadores están en este momento centrados en el tercer de los cinco niveles de autonomía, los cuales son: asistencia en la conducción, automatización parcial, automatización condicional, alta automatización y automatización completa. A pesar de los rápidos progresos que están habiendo en este campo, la adopción de estas soluciones llevará tiempo no sólo debido a cuestiones legales, sino también por el hecho de que los avances tecnológicos se enfrentan a un lento respaldo por parte de los fabricantes. Además, la baja tasa de renovación de vehículos de carretera, dificulta el despliegue de tecnologías innovadoras, como es el caso de la red vehicular. Ocho años después de la introducción de la norma 802.11p para la comunicación vehicular del Instituto de Ingenieros Eléctricos y Electrónicos (IIEE), los vehículos que se usan a diario todavía carecen de la capacidad de comunicarse entre sí. Este hecho impide el uso de las muchas aplicaciones de seguridad del Sistema de Inteligencia de Transporte (SIT) que aprovecha la red vehicular para el intercambio de datos. La forma obvia de manejar este problema es poner las tecnologías disponibles a la disposición de los usuarios comunes para desarrollar soluciones que se puedan implementar fácilmente y, además, económicas. Por esta razón, trasladamos nuestra atención a los dispositivos inteligentes, especialmente a los teléfonos inteligentes, los cuales han recorrido un largo camino desde la primera introducción de teléfonos móviles a finales del siglo XX. Hoy en día casi todos llevan uno en su bolsillo a donde sea que vayan, permitiéndoles no sólo hacer llamadas, sino también medir y controlar diferentes parámetros con la ayuda de los muchos sensores integrados que están disponibles para estos dispositivos compactos pero potentes. Nuestro objetivo es estudiar los efectos de la integración de los teléfonos inteligentes a la red vehicular para desarrollar aplicaciones de seguridad del SIT. La elección de los teléfonos inteligentes aquí no solo está justificada por su amplia disponibilidad y uso, sino también porque están evolucionando hacia terminales de alto rendimiento con microprocesadores de múltiples núcleos cargados dotados de un grupo suficientemente diverso de sensores. En esta tesis proponemos tres diferentes aplicaciones de seguridad SIT para teléfonos inteligentes, diseñados para aprovechar el entorno de red vehicular: una aplicación de generación de advertencia llamada Messiah que alerta a los conductores de la presencia de vehículos de emergencia en las cercanías; una aplicación de Advertencia de Colisión Frontal (ACF) que advierte a los conductores si no se mantiene la distancia de seguridad mínima entre el vehículo que va delante y el que lo sigue; y, por último, una aplicación que tiene como objetivo ayudar a los conductores con asistencia visual durante el adelantamiento, llamada EYES. Todas estas aplicaciones han sido desarrolladas para la plataforma Android, y dependen de la transmisión de datos entre vehículos. Dado que los vehículos que utilizamos día a día no admiten la posibilidad de comunicarse entre sí, también diseñamos GRCBox, que es una unidad integrada de bajo coste que permite la comunicación del Vehículo a Todo (V2X). A partir de nuestro estudio de aplicaciones para dispositivos móviles diseñados para redes vehiculares, descubrimos que el uso de teléfonos inteligentes proporciona una nueva dirección para la investigación relacionada con SIT y redes vehiculares al permitir la adopción rápida de las soluciones existentes, donde los usuarios pueden descargar y usar las aplicaciones con sólo un clic a un botón. Al mismo tiempo, la portabilidad y compacidad de los dispositivos los hace limitados en términos de velocidad, potencia de procesamiento y precisi[CA] Una de les àrees d'investigació que està rebent més atenció recentment és la de vehicles autònoms. Els investigadores estan en este moment centrats en el tercer dels cinc nivells d'autonomia, els quals són: assistència en la conducció, automatització parcial, automatització condicional, alta automatització i automatització completa. Malgrat els ràpids progressos que s'estan donant en este camp, l'adopció d'estes solucions portarà temps no sols degut a qüestions legals, sinó també pel fet que els avanços tecnològics s'enfronten a un lent recolzament per part dels fabricants. A més a més, la baixa taxa de renovació de vehicles de carretera, dificulta el desplegament de tecnologies innovadores com és el cas de la xarxa vehicular. Huit anys després de la introducció de la norma 802.11p per a la comunicació vehicular de l'Institut d'Enginyers Elèctrics i Electrònics (IEEE), els vehicles que s'utilitzen a diari encara manquen de la capacitat de comunicar-se entre sí. Este fet impedeix l'ús de les moltes aplicacions de seguretat del Sistema d'Intel·ligència de Transport (SIT) que aprofita la xarxa vehicular per a l'intercanvi de dades. La forma òbvia de tractar aquest problema és posar les tecnologies disponibles a la disposició dels usuaris comuns per a desenvolupar solucions que es puguen implementar fàcilment, còmodes d'adoptar i, a més a més, econòmiques. Per aquesta raó, traslladem la nostra atenció als dispositius intel·ligents, especialment als telèfons intel·ligents, els quals han recorregut un llarg camí des de la primera introducció de telèfons mòbils a finals del segle XX. Hui en dia quasi tots porten un en la butxaca on siga que vagen, permetent-los no sols fer cridades, sinó també mesurar i controlar diferents paràmetres amb l'ajuda dels molts sensors integrats que estan disponibles per a estos dispositius compactes però potents. El nostre objectiu és estudiar els efectes de la integració dels telèfons intel·ligents a la xarxa vehicular per a desenvolupar aplicacions de seguretat del SIT. L'elecció dels telèfons intel·ligents ací no està sols justificada per la seua àmplia disponibilitat i ús, sinó també perquè estan evolucionant cap a terminals d'alt rendiment amb microprocessadors de múltiples nuclis dotats amb un grup suficientment divers de sensors. En esta tesi proposem tres diferents aplicacions de seguretat SIT per a telèfons intel·ligents, dissenyats per a aprofitar l'entorn de xarxa vehicular: una aplicació de generació d'advertència anomenada Messiah que alerta els conductors de la presència de vehicles d'emergència en les proximitats; una aplicació Advertència de Col·lisió Frontal (ACF) que adverteix els conductors si no mantenen la distància de seguretat mínima entre el vehicle que va davant i el que el segueix; i, per últim, una aplicació que té com objectiu ajudar els conductors amb assistència visual durant l'avançament, anomenat EYES. Totes aquestes aplicacions han sigut desenvolupades per a la plataforma Android, i depenen de la transmissió de dades entre vehicles. Donat que els vehicles que utilitzem a diari no admeten la possibilitat de comunicar-se entre sí, també dissenyem GRCBox, que és una unitat integrada de baix cost que permet la comunicació de Vechicle a Tot (V2X). A partir del nostre estudi d'aplicacions per a dispositius mòbils dissenyats per a xarxes vehiculars, descobrim que l'ús de telèfons intel·ligents proporciona una nova direcció per a la investigació relacionada amb SIT i xarxes vehiculars al permetre l'adopció ràpida de les solucions existents, on els usuaris poden descarregar i utilitzar les aplicacions amb un sol clic a un botó. Però al mateix temps, la portabilitat i la compacitat dels dispositius els fa limitats en termes de velocitat, potència de processament i precisió del sensor integrat, cosa que afecta al rendiment de les aplicacions.[EN] One of the research areas that is receiving a lot of attention recently is autonomous vehicles. Researchers are currently focused on the third level of autonomy out of the five levels, which are: drive assistance, partial automation, conditional automation, high automation, and full automation. Even though rapid progress is being made in this field, the adoption of these solutions will take time not only due to legal issues, but also due to the fact that technological improvements face slow endorsement by manufacturers. Also, the slow renewal rate of vehicles on road hinders the deployment of novel technologies, as is the case of Vehicular Networks (VNs). Eight years after the introduction of the IEEE 802.11p standard for vehicular communication, vehicles used on a daily basis still lack the capability of communicating with one other. This fact impedes the use of the many ITS safety applications that take advantage of VNs for data exchange. The obvious way to handle this problem is to use the available technologies at the disposal of common users to develop solutions that are easily deployable, effortless to adopt, and moreover, cost effective. For this reason we shift our attention to smart devices, specially smartphones, which have come a long way since the first introduction of mobile phones in the late 20th century. Nowadays, nearly everyone carries one in their pocket anywhere they go, allowing them to not only make calls, but also to measure and monitor different parameters with the help of the many on-board sensors that are available to these compact yet powerful devices. Our objective is to study the effects of integrating smartphones to vehicular networks, to develop ITS safety applications. The choice of smartphones here is not only justified by their wide availability and use, but also because they are evolving towards high performance terminals with multi-core microprocessors packed with a sufficiently diverse group of sensors. In this thesis we propose three different ITS safety applications for smartphones, designed to take advantage of the vehicular network environment: a warning generation application called Messiah that alerts drivers of the presence of emergency vehicles in close proximity; a FCW application which warns drivers if a minimum safe distance is not maintained between the vehicle ahead and the one following it; and lastly an application that aims to aid drivers with visual assistance while overtaking, named EYES. All these applications have been developed for the Android platform, and are dependent on the data transmission among vehicles. Since vehicles we use on a day to day basis still do not accommodate the possibility to communicate with one another, we also designed the GRCBox, which is a low cost on-board unit that supports V2X communication. From our study of applications for mobile devices designed for VNs, we found that the use of smartphones provides a new direction to research related to ITS and VNs by allowing a quick adoption of the existing solutions, where users are able to download and use applications just by one click of a button. But at the same time, the portability and compactness of the devices makes them limited in terms of speed, processing power, and accuracy of the on-board sensor, thus affecting the performance of the applications. In our case, the simpler Messiah application performed very well, while the EYES application that is dependent on GPS data, and the FCW application which required heavy processing and use of the camera due to its dependence on plate recognition, were affected by the hardware limitations of the smartphones.Patra, S. (2019). Development and evaluation of smartphone-based ITS applications for vehicular networks [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/124058TESI