Network parameters impact on dynamic transmission power control in vehicular ad hoc networks

International audienceIn vehicular ad hoc networks, the dynamic change in transmission power is very effective to increase the throughput of the wireless vehicular network and decrease the delay of the message communication between vehicular nodes on the highway. Whenever an event occurs on the highway, the reliability of the communication in the vehicular network becomes so vital so that event created messages should reach to all the moving network nodes. It becomes necessary that there should be no interference from outside of the network and all the neighbor nodes should lie in the transmission range of the reference vehicular node. Transmission range is directly proportional to the transmission power the moving node. If the transmission power will be high, the interference increases that can cause higher delay in message reception at receiver end, hence the performance of the network decreased. In this paper, it is analyzed that how transmission power can be controlled by considering other different parameter of the network such as; density, distance between moving nodes, different types of messages dissemination with their priority, selection of an antenna also affects the transmission power. The dynamic control of transmission power in VANET serves also for the optimization of the resources where it needs, can be decreased and increased depending on the circumstances of the network. Different applications and events of different types also cause changes in transmission power to enhance the reachability. The analysis in this paper is comprised of density, distance with single hop and multi hop message broadcasting based dynamic transmission power control as well as antenna selection and applications based. Some summarized tables are produced according to the respective parameters of the vehicular network. At the end some valuable observations are made and discussed in detail

A framework and mathematical modeling for the vehicular delay tolerant network routing

Vehicular ad hoc networks (VANETs) are getting growing interest as they are expected to play crucial role in making safer, smarter, and more efficient transportation networks. Due to unique characteristics such as sparse topology and intermittent connectivity, Delay Tolerant Network (DTN) routing in VANET becomes an inherent choice and is challenging. However, most of the existing DTN protocols do not accurately discover potential neighbors and, hence, appropriate intermediate nodes for packet transmission. Moreover, these protocols cause unnecessary overhead due to excessive beacon messages. To cope with these challenges, this paper presents a novel framework and an Adaptive Geographical DTN Routing (AGDR) for vehicular DTNs. AGDR exploits node position, current direction, speed, and the predicted direction to carefully select an appropriate intermediate node. Direction indicator light is employed to accurately predict the vehicle future direction so that the forwarding node can relay packets to the desired destination. Simulation experiments confirm the performance supremacy of AGDR compared to contemporary schemes in terms of packet delivery ratio, overhead, and end-to-end delay. Simulation results demonstrate that AGDR improves the packet delivery ratio (5-7%), reduces the overhead (1-5%), and decreases the delay (up to 0.02 ms). Therefore, AGDR improves route stability by reducing the frequency of route failures. © 2016 Mostofa Kamal Nasir et al

Adaptive Beacon Broadcast in Opportunistic Routing for VANETs

Broadcast of beacon messages including geographic coordinates, node speeds, and directions are among the most commonly used methods in routing protocols of VANETs to obtain neighboring positions. Broadcast of periodic beacon messages in fixed time intervals will reduce network performance due to increased channel load and contention. In this paper, an adaptive update strategy for sending beacon messages according to the VANETs’ characteristics (position, speed, and direction) and the nature of broadcast wireless channel in an opportunistic routing strategy is studied. It is based on two rules: 1) an estimation of the lifetime of the links between vehicles’ beacon messages are sent after the expiration of the estimated time to inform their local topology and 2) if the forwarding set of consecutively received data packets is changed, a beacon message is sent to maintain the accuracy of the topology. The simulation results show that the proposed strategy significantly reduces the cost of routing and improves network performance in terms of packet-delivery ratios, average end-to-end delay, and routing overhead

A scalable data dissemination protocol for both highway and urban vehicular environments

Vehicular ad hoc networks (VANETs) enable the timely broadcast dissemination of event-driven messages to interested vehicles. Especially when dealing with broadcast communication, data dissemination protocols must achieve a high degree of scalability due to frequent deviations in the network density. In dense networks, suppression techniques are designed to prevent the so-called broadcast storm problem. In sparse networks, protocols incorporate store-carry-forward mechanisms to take advantage of the mobility of vehicles to store and relay messages until a new opportunity for dissemination emerges. Despite numerous efforts, most related works focus on either highway or urban scenarios, but not both. Highways are mostly addressed with a single directional dissemination. For urban scenarios, protocols mostly concentrate on either using infrastructure or developing methods for selecting vehicles to perform the store-carry-forward task. In both cases, dense networks are dealt with suppression techniques that are not optimal for multi-directional dissemination. To fill this gap, we present an infrastructure-less protocol that combines a generalized time slot scheme based on directional sectors and a store-carry-forward algorithm to support multi-directional data dissemination. By means of simulations, we show that our protocol scales properly in various network densities in both realistic highway and urban scenarios. Most importantly, it outperforms state-of-the-art protocols in terms of delivery ratio, end-to-end delay, and number of transmissions. Compared to these solutions, our protocol presents up to seven times lower number of transmissions in dense highway scenarios

DESIGN OF EFFICIENT IN-NETWORK DATA PROCESSING AND DISSEMINATION FOR VANETS

By providing vehicle-to-vehicle and vehicle-to-infrastructure wireless communications, vehicular ad hoc networks (VANETs), also known as the “networks on wheels”, can greatly enhance traffic safety, traffic efficiency and driving experience for intelligent transportation system (ITS). However, the unique features of VANETs, such as high mobility and uneven distribution of vehicular nodes, impose critical challenges of high efficiency and reliability for the implementation of VANETs. This dissertation is motivated by the great application potentials of VANETs in the design of efficient in-network data processing and dissemination. Considering the significance of message aggregation, data dissemination and data collection, this dissertation research targets at enhancing the traffic safety and traffic efficiency, as well as developing novel commercial applications, based on VANETs, following four aspects: 1) accurate and efficient message aggregation to detect on-road safety relevant events, 2) reliable data dissemination to reliably notify remote vehicles, 3) efficient and reliable spatial data collection from vehicular sensors, and 4) novel promising applications to exploit the commercial potentials of VANETs. Specifically, to enable cooperative detection of safety relevant events on the roads, the structure-less message aggregation (SLMA) scheme is proposed to improve communication efficiency and message accuracy. The scheme of relative position based message dissemination (RPB-MD) is proposed to reliably and efficiently disseminate messages to all intended vehicles in the zone-of-relevance in varying traffic density. Due to numerous vehicular sensor data available based on VANETs, the scheme of compressive sampling based data collection (CS-DC) is proposed to efficiently collect the spatial relevance data in a large scale, especially in the dense traffic. In addition, with novel and efficient solutions proposed for the application specific issues of data dissemination and data collection, several appealing value-added applications for VANETs are developed to exploit the commercial potentials of VANETs, namely general purpose automatic survey (GPAS), VANET-based ambient ad dissemination (VAAD) and VANET based vehicle performance monitoring and analysis (VehicleView). Thus, by improving the efficiency and reliability in in-network data processing and dissemination, including message aggregation, data dissemination and data collection, together with the development of novel promising applications, this dissertation will help push VANETs further to the stage of massive deployment

Broadcasting Protocol for Effective Data Dissemination in Vehicular Ad Hoc Networks

VANET topology is very dynamic due to frequent movements of the nodes. Using beacon information connected dominated set are formed and nodes further enhanced with neighbor elimination scheme. With acknowledgement the inter section issues are solve. A modified Broadcast Conquest and Delay De-synchronization mechanism address the broadcasting storm issues. Although data dissemination is possible in all direction, the performance of data dissemination in the opposite direction is investigated and compared against the existing protocols

A Reliable and Efficient Encounter-Based Routing Framework for Delay/Disruption Tolerant Networks

This article addresses Delay/Disruption Tolerant Networking (DTN) routing under a highly dynamic scenario, envisioned for communication in Vehicular Sensor Networks (VSNs) suffering from intermittent connection. Here, we focus on the design of a high level routing framework, rather than the dedicated encounter prediction. Based on an analyzed utility metric to predict nodal encounter, our proposed routing framework considers the following three cases: 1) Messages are efficiently replicated to a better qualified candidate node, based on the analysed utility metric related to destination. 2) Messages are conditionally replicated if the node with a better utility metric has not been met. 3) Messages are probabilistically replicated if the information in relation to destination is unavailable in the worst case. With this framework in mind, we propose two routing schemes covering two major technique branches in literature, namely Encounter-Based Replication Routing (EBRR) and Encounter-Based Spraying Routing (EBSR). Results under the scenario applicable to VSNs show that, in addition to achieving high delivery ratio for reliability, our schemes are more efficient in terms of a lower overhead ratio. Our core investigation indicates that apart from what information to use for encounter prediction, how to deliver messages based on the given utility metric is also important

INTERMITTENTLY CONNECTED DELAY-TOLERANT WIRELESS SENSOR NETWORKS

Intermittently Connected Delay-Tolerant Wireless Sensor Networks (ICDT-WSNs), a branch of Wireless Sensor Networks (WSNs), have features of WSNs and the intermittent connectivity of Opportunistic Networks. The applications of ICDT-WSNs are increasing in recent years; however, the communication protocols suitable for this category of networks often fall short. Most of the existing communication protocols are designed for either WSNs or Opportunistic Networks with sufficient resources and tend to be inadequate for direct use in ICDT-WSNs. In this dissertation, we study ICDT-WSNs from the perspective of the characteristics, chal- lenges and possible solutions. A high-level overview of ICDT-WSNs is given, followed by a study of existing work and our solutions to address the problems of routing, flow control, error control, and storage management. The proposed solutions utilize the utility level of nodes and the connectedness of a network. In addition to the protocols for information transmissions to specific destinations, we also propose efficient mechanisms for information dissemination to arbitrary destinations. The study shows that our proposed solutions can achieve better performance than other state of the art communication protocols without sacrificing energy efficiency