Modeling and Evaluating Feedback-Based Error Control for Video Transfer

Packet loss can be detrimental to real-time interactive video over lossy networks because one lost video packet can propagate errors to many subsequent video frames due to the encoding dependency between frames. Feedback-based error control techniques use feedback information from the decoder to adjust coding parameters at the encoder or retransmit lost packets to reduce the error propagation due to data loss. Feedback-based error control techniques have been shown to be more effective than trying to conceal the error at the encoder or decoder alone since they allow the encoder and decoder to cooperate in the error control process. However, there has been no systematic exploration of the impact of video content and network conditions on the performance of feedback-based error control techniques. In particular, the impact of packet loss, round-trip delay, network capacity constraint, video motion and reference distance on the quality of videos using feedback-based error control techniques have not been systematically studied. This thesis presents analytical models for the major feedback-based error control techniques: Retransmission, Reference Picture Selection (both NACK and ACK modes) and Intra Update. These feedback-based error control techniques have been included in H.263/H.264 and MPEG4, the state of the art video in compression standards. Given a round-trip time, packet loss rate, network capacity constraint, our models can predict the quality for a streaming video with retransmission, Intra Update and RPS over a lossy network. In order to exploit our analytical models, a series of studies has been conducted to explore the effect of reference distance, capacity constraint and Intra coding on video quality. The accuracy of our analytical models in predicting the video quality under different network conditions is validated through simulations. These models are used to examine the behavior of feedback-based error control schemes under a variety of network conditions and video content through a series of analytic experiments. Analysis shows that the performance of feedback-based error control techniques is affected by a variety of factors including round-trip time, loss rate, video content and the Group of Pictures (GOP) length. In particular: 1) RPS NACK achieves the best performance when loss rate is low while RPS ACK outperforms other repair techniques when loss rate is high. However RPS ACK performs the worst when loss rate is low. Retransmission performs the worst when the loss rate is high; 2) for a given round-trip time, the loss rate where RPS NACK performs worse than RPS ACK is higher for low motion videos than it is for high motion videos; 3) Videos with RPS NACK always perform the same or better than videos without repair. However, when small GOP sizes are used, videos without repair perform better than videos with RPS ACK; 4) RPS NACK outperform Intra Update for low-motion videos. However, the performance gap between RPS NACK and Intra Update drops when the round-trip time or the intensity of video motion increases. 5) Although the above trends hold for both VQM and PSNR, when VQM is the video quality metric the performance results are much more sensitive to network loss. 6) Retransmission is effective only when the round-trip time is low. When the round-trip time is high, Partial Retransmission achieves almost the same performance as Full Retransmission. These insights derived from our models can help determine appropriate choices for feedback-based error control techniques under various network conditions and video content

High Quality of Service on Video Streaming in P2P Networks using FST-MDC

Video streaming applications have newly attracted a large number of participants in a distribution network. Traditional client-server based video streaming solutions sustain precious bandwidth provision rate on the server. Recently, several P2P streaming systems have been organized to provide on-demand and live video streaming services on the wireless network at reduced server cost. Peer-to-Peer (P2P) computing is a new pattern to construct disseminated network applications. Typical error control techniques are not very well matched and on the other hand error prone channels has increased greatly for video transmission e.g., over wireless networks and IP. These two facts united together provided the essential motivation for the development of a new set of techniques (error concealment) capable of dealing with transmission errors in video systems. In this paper, we propose an flexible multiple description coding method named as Flexible Spatial-Temporal (FST) which improves error resilience in the sense of frame loss possibilities over independent paths. It introduces combination of both spatial and temporal concealment technique at the receiver and to conceal the lost frames more effectively. Experimental results show that, proposed approach attains reasonable quality of video performance over P2P wireless network.Comment: 11 pages, 8 figures, journa

Power-Constrained Fuzzy Logic Control of Video Streaming over a Wireless Interconnect

Wireless communication of video, with Bluetooth as an example, represents a compromise between channel conditions, display and decode deadlines, and energy constraints. This paper proposes fuzzy logic control (FLC) of automatic repeat request (ARQ) as a way of reconciling these factors, with a 40% saving in power in the worst channel conditions from economizing on transmissions when channel errors occur. Whatever the channel conditions are, FLC is shown to outperform the default Bluetooth scheme and an alternative Bluetooth-adaptive ARQ scheme in terms of reduced packet loss and delay, as well as improved video quality

Fuzzy Logic Control of Adaptive ARQ for Video Distribution over a Bluetooth Wireless Link

Bluetooth's default automatic repeat request (ARQ) scheme is not suited to video distribution resulting in missed display and decoded deadlines. Adaptive ARQ with active discard of expired packets from the send buffer is an alternative approach. However, even with the addition of cross-layer adaptation to picture-type packet importance, ARQ is not ideal in conditions of a deteriorating RF channel. The paper presents fuzzy logic control of ARQ, based on send buffer fullness and the head-of-line packet's deadline. The advantage of the fuzzy logic approach, which also scales its output according to picture type importance, is that the impact of delay can be directly introduced to the model, causing retransmissions to be reduced compared to all other schemes. The scheme considers both the delay constraints of the video stream and at the same time avoids send buffer overflow. Tests explore a variety of Bluetooth send buffer sizes and channel conditions. For adverse channel conditions and buffer size, the tests show an improvement of at least 4 dB in video quality compared to nonfuzzy schemes. The scheme can be applied to any codec with I-, P-, and (possibly) B-slices by inspection of packet headers without the need for encoder intervention.</jats:p

Hybrid Contribution of JPEG200 Video Files for Professional Production Centers Reliability and Non-Reliability Transmission File Based in Image Quality Needed

ATM, SDH or satellite have been used in the last century as the contribution network of Broadcasters. However the attractive price of IP networks is changing the infrastructure of these networks in the last decade. Nowadays, IP networks are widely used, but their characteristics do not offer the level of performance required to carry high quality video under certain circumstances. Data transmission is always subject to errors on line. In the case of streaming, correction is attempted at destination, while on transfer of files, retransmissions of information are conducted and a reliable copy of the file is obtained. In the latter case, reception time is penalized because of the low priority this type of traffic on the networks usually has. While in streaming, image quality is adapted to line speed, and line errors result in a decrease of quality at destination, in the file copy the difference between coding speed vs line speed and errors in transmission are reflected in an increase of transmission time. The way news or audiovisual programs are transferred from a remote office to the production centre depends on the time window and the type of line available; in many cases, it must be done in real time (streaming), with the resulting image degradation. The main purpose of this work is the workflow optimization and the image quality maximization, for that reason a transmission model for multimedia files adapted to JPEG2000, is described based on the combination of advantages of file transmission and those of streaming transmission, putting aside the disadvantages that these models have. The method is based on two patents and consists of the safe transfer of the headers and data considered to be vital for reproduction. Aside, the rest of the data is sent by streaming, being able to carry out recuperation operations and error concealment. Using this model, image quality is maximized according to the time window. In this paper, we will first give a briefest overview of the broadcasters requirements and the solutions with IP networks. We will then focus on a different solution for video file transfer. We will take the example of a broadcast center with mobile units (unidirectional video link) and regional headends (bidirectional link), and we will also present a video file transfer file method that satisfies the broadcaster requirements