32,482 research outputs found
Vitis: A Gossip-based Hybrid Overlay for Internet-scale Publish/Subscribe
Peer-to-peer overlay networks are attractive solutions for building Internet-scale publish/subscribe systems. However, scalability comes with a cost: a message published on a certain topic often needs to traverse a large number of uninterested (unsubscribed) nodes before reaching all its
subscribers. This might sharply increase resource consumption for such relay nodes (in terms of bandwidth transmission cost, CPU, etc) and could ultimately lead to rapid deterioration of the system’s performance once the relay nodes start dropping the messages or choose to permanently abandon the system. In this paper, we introduce Vitis, a gossip-based publish/subscribe system that significantly decreases the number of relay messages, and scales to an unbounded number of nodes and topics. This is achieved by the novel approach of enabling rendezvous routing on unstructured overlays. We construct a hybrid system by injecting structure into an otherwise unstructured network. The resulting structure resembles a navigable small-world network, which spans along clusters of nodes that have similar subscriptions. The properties of such an overlay make it an ideal platform for efficient data dissemination in large-scale systems. We perform extensive simulations and evaluate Vitis by comparing its performance against two base-line publish/subscribe systems: one that is oblivious to node subscriptions, and another that exploits the subscription similarities. Our measurements show that Vitis significantly outperforms the base-line solutions on various subscription and churn scenarios, from both synthetic models and real-world traces
IETF standardization in the field of the Internet of Things (IoT): a survey
Smart embedded objects will become an important part of what is called the Internet of Things. However, the integration of embedded devices into the Internet introduces several challenges, since many of the existing Internet technologies and protocols were not designed for this class of devices. In the past few years, there have been many efforts to enable the extension of Internet technologies to constrained devices. Initially, this resulted in proprietary protocols and architectures. Later, the integration of constrained devices into the Internet was embraced by IETF, moving towards standardized IP-based protocols. In this paper, we will briefly review the history of integrating constrained devices into the Internet, followed by an extensive overview of IETF standardization work in the 6LoWPAN, ROLL and CoRE working groups. This is complemented with a broad overview of related research results that illustrate how this work can be extended or used to tackle other problems and with a discussion on open issues and challenges. As such the aim of this paper is twofold: apart from giving readers solid insights in IETF standardization work on the Internet of Things, it also aims to encourage readers to further explore the world of Internet-connected objects, pointing to future research opportunities
Training of Crisis Mappers and Map Production from Multi-sensor Data: Vernazza Case Study (Cinque Terre National Park, Italy)
This aim of paper is to presents the development of a multidisciplinary project carried out by the cooperation between Politecnico di Torino and ITHACA (Information Technology for Humanitarian Assistance, Cooperation and Action). The goal of the project was the training in geospatial data acquiring and processing for students attending Architecture and Engineering Courses, in order to start up a team of "volunteer mappers". Indeed, the project is aimed to document the environmental and built heritage subject to disaster; the purpose is to improve the capabilities of the actors involved in the activities connected in geospatial data collection, integration and sharing. The proposed area for testing the training activities is the Cinque Terre National Park, registered in the World Heritage List since 1997. The area was affected by flood on the 25th of October 2011. According to other international experiences, the group is expected to be active after emergencies in order to upgrade maps, using data acquired by typical geomatic methods and techniques such as terrestrial and aerial Lidar, close-range and aerial photogrammetry, topographic and GNSS instruments etc.; or by non conventional systems and instruments such us UAV, mobile mapping etc. The ultimate goal is to implement a WebGIS platform to share all the data collected with local authorities and the Civil Protectio
Dovetail: Stronger Anonymity in Next-Generation Internet Routing
Current low-latency anonymity systems use complex overlay networks to conceal
a user's IP address, introducing significant latency and network efficiency
penalties compared to normal Internet usage. Rather than obfuscating network
identity through higher level protocols, we propose a more direct solution: a
routing protocol that allows communication without exposing network identity,
providing a strong foundation for Internet privacy, while allowing identity to
be defined in those higher level protocols where it adds value.
Given current research initiatives advocating "clean slate" Internet designs,
an opportunity exists to design an internetwork layer routing protocol that
decouples identity from network location and thereby simplifies the anonymity
problem. Recently, Hsiao et al. proposed such a protocol (LAP), but it does not
protect the user against a local eavesdropper or an untrusted ISP, which will
not be acceptable for many users. Thus, we propose Dovetail, a next-generation
Internet routing protocol that provides anonymity against an active attacker
located at any single point within the network, including the user's ISP. A
major design challenge is to provide this protection without including an
application-layer proxy in data transmission. We address this challenge in path
construction by using a matchmaker node (an end host) to overlap two path
segments at a dovetail node (a router). The dovetail then trims away part of
the path so that data transmission bypasses the matchmaker. Additional design
features include the choice of many different paths through the network and the
joining of path segments without requiring a trusted third party. We develop a
systematic mechanism to measure the topological anonymity of our designs, and
we demonstrate the privacy and efficiency of our proposal by simulation, using
a model of the complete Internet at the AS-level
Hybrid Satellite-Terrestrial Communication Networks for the Maritime Internet of Things: Key Technologies, Opportunities, and Challenges
With the rapid development of marine activities, there has been an increasing
number of maritime mobile terminals, as well as a growing demand for high-speed
and ultra-reliable maritime communications to keep them connected.
Traditionally, the maritime Internet of Things (IoT) is enabled by maritime
satellites. However, satellites are seriously restricted by their high latency
and relatively low data rate. As an alternative, shore & island-based base
stations (BSs) can be built to extend the coverage of terrestrial networks
using fourth-generation (4G), fifth-generation (5G), and beyond 5G services.
Unmanned aerial vehicles can also be exploited to serve as aerial maritime BSs.
Despite of all these approaches, there are still open issues for an efficient
maritime communication network (MCN). For example, due to the complicated
electromagnetic propagation environment, the limited geometrically available BS
sites, and rigorous service demands from mission-critical applications,
conventional communication and networking theories and methods should be
tailored for maritime scenarios. Towards this end, we provide a survey on the
demand for maritime communications, the state-of-the-art MCNs, and key
technologies for enhancing transmission efficiency, extending network coverage,
and provisioning maritime-specific services. Future challenges in developing an
environment-aware, service-driven, and integrated satellite-air-ground MCN to
be smart enough to utilize external auxiliary information, e.g., sea state and
atmosphere conditions, are also discussed
Active architecture for pervasive contextual services
International Workshop on Middleware for Pervasive and Ad-hoc Computing MPAC 2003), ACM/IFIP/USENIX International Middleware Conference (Middleware 2003), Rio de Janeiro, Brazil This work was supported by the FP5 Gloss project IST2000-26070, with partners at Trinity College Dublin and Université Joseph Fourier, and by EPSRC grants GR/M78403/GR/M76225, Supporting Internet Computation in Arbitrary Geographical Locations, and GR/R45154, Bulk Storage of XML Documents.Pervasive services may be defined as services that are available "to any client (anytime, anywhere)". Here we focus on the software and network infrastructure required to support pervasive contextual services operating over a wide area. One of the key requirements is a matching service capable of as-similating and filtering information from various sources and determining matches relevant to those services. We consider some of the challenges in engineering a globally distributed matching service that is scalable, manageable, and able to evolve incrementally as usage patterns, data formats, services, network topologies and deployment technologies change. We outline an approach based on the use of a peer-to-peer architecture to distribute user events and data, and to support the deployment and evolution of the infrastructure itself.Peer reviewe
A Survey on Wireless Sensor Network Security
Wireless sensor networks (WSNs) have recently attracted a lot of interest in
the research community due their wide range of applications. Due to distributed
nature of these networks and their deployment in remote areas, these networks
are vulnerable to numerous security threats that can adversely affect their
proper functioning. This problem is more critical if the network is deployed
for some mission-critical applications such as in a tactical battlefield.
Random failure of nodes is also very likely in real-life deployment scenarios.
Due to resource constraints in the sensor nodes, traditional security
mechanisms with large overhead of computation and communication are infeasible
in WSNs. Security in sensor networks is, therefore, a particularly challenging
task. This paper discusses the current state of the art in security mechanisms
for WSNs. Various types of attacks are discussed and their countermeasures
presented. A brief discussion on the future direction of research in WSN
security is also included.Comment: 24 pages, 4 figures, 2 table
Intelligent Management and Efficient Operation of Big Data
This chapter details how Big Data can be used and implemented in networking
and computing infrastructures. Specifically, it addresses three main aspects:
the timely extraction of relevant knowledge from heterogeneous, and very often
unstructured large data sources, the enhancement on the performance of
processing and networking (cloud) infrastructures that are the most important
foundational pillars of Big Data applications or services, and novel ways to
efficiently manage network infrastructures with high-level composed policies
for supporting the transmission of large amounts of data with distinct
requisites (video vs. non-video). A case study involving an intelligent
management solution to route data traffic with diverse requirements in a wide
area Internet Exchange Point is presented, discussed in the context of Big
Data, and evaluated.Comment: In book Handbook of Research on Trends and Future Directions in Big
Data and Web Intelligence, IGI Global, 201
Implementation and evaluation of the sensornet protocol for Contiki
Sensornet Protocol (SP) is a link abstraction layer between the network layer and the link layer for sensor networks. SP was proposed as the core of a future-oriented sensor node architecture that allows flexible and optimized combination between multiple coexisting protocols. This thesis implements the SP sensornet protocol on the Contiki operating system in order to: evaluate the effectiveness of the original SP services; explore further requirements and implementation trade-offs uncovered by the original proposal. We analyze the original SP design and the TinyOS implementation of SP to design the Contiki port. We implement the data sending and receiving part of SP using Contiki processes, and the neighbor management part as a group of global routines. The evaluation consists of a single-hop traffic throughput test and a multihop convergecast test. Both tests are conducted using both simulation and experimentation. We conclude from the evaluation results that SP's link-level abstraction effectively improves modularity in protocol construction without sacrificing performance, and our SP implementation on Contiki lays a good foundation for future protocol innovations in wireless sensor networks
Active architecture for pervasive contextual services
Pervasive services may be defined as services that are available to any client (anytime, anywhere). Here we focus on the software and network infrastructure required to support pervasive contextual services operating over a wide area. One of the key requirements is a matching service capable of assimilating and filtering information from various sources and determining matches relevant to those services. We consider some of the challenges in engineering a globally distributed matching service that is scalable, manageable, and able to evolve incrementally as usage patterns, data formats, services, network topologies and deployment technologies change. We outline an approach based on the use of a peer-to-peer architecture to distribute user events and data, and to support the deployment and evolution of the infrastructure itself
- …