2,892 research outputs found
Design and Evaluation of a Hardware System for Online Signal Processing within Mobile Brain-Computer Interfaces
Brain-Computer Interfaces (BCIs) sind innovative Systeme, die eine direkte Kommunikation zwischen dem Gehirn und externen GerĂ€ten ermöglichen. Diese Schnittstellen haben sich zu einer transformativen Lösung nicht nur fĂŒr Menschen mit neurologischen Verletzungen entwickelt, sondern auch fĂŒr ein breiteres Spektrum von Menschen, das sowohl medizinische als auch nicht-medizinische Anwendungen umfasst. In der Vergangenheit hat die Herausforderung, dass neurologische Verletzungen nach einer anfĂ€nglichen Erholungsphase statisch bleiben, die Forscher dazu veranlasst, innovative Wege zu beschreiten. Seit den 1970er Jahren stehen BCIs an vorderster Front dieser BemĂŒhungen. Mit den Fortschritten in der Forschung haben sich die BCI-Anwendungen erweitert und zeigen ein groĂes Potenzial fĂŒr eine Vielzahl von Anwendungen, auch fĂŒr weniger stark eingeschrĂ€nkte (zum Beispiel im Kontext von Hörelektronik) sowie völlig gesunde Menschen (zum Beispiel in der Unterhaltungsindustrie). Die Zukunft der BCI-Forschung hĂ€ngt jedoch auch von der VerfĂŒgbarkeit zuverlĂ€ssiger BCI-Hardware ab, die den Einsatz in der realen Welt gewĂ€hrleistet.
Das im Rahmen dieser Arbeit konzipierte und implementierte CereBridge-System stellt einen bedeutenden Fortschritt in der Brain-Computer-Interface-Technologie dar, da es die gesamte Hardware zur Erfassung und Verarbeitung von EEG-Signalen in ein mobiles System integriert. Die Architektur der Verarbeitungshardware basiert auf einem FPGA mit einem ARM Cortex-M3 innerhalb eines heterogenen ICs, was FlexibilitĂ€t und Effizienz bei der EEG-Signalverarbeitung gewĂ€hrleistet. Der modulare Aufbau des Systems, bestehend aus drei einzelnen Boards, gewĂ€hrleistet die Anpassbarkeit an unterschiedliche Anforderungen. Das komplette System wird an der Kopfhaut befestigt, kann autonom arbeiten, benötigt keine externe Interaktion und wiegt einschlieĂlich der 16-Kanal-EEG-Sensoren nur ca. 56 g. Der Fokus liegt auf voller MobilitĂ€t.
Das vorgeschlagene anpassbare Datenflusskonzept erleichtert die Untersuchung und nahtlose Integration von Algorithmen und erhöht die FlexibilitĂ€t des Systems. Dies wird auch durch die Möglichkeit unterstrichen, verschiedene Algorithmen auf EEG-Daten anzuwenden, um unterschiedliche Anwendungsziele zu erreichen. High-Level Synthesis (HLS) wurde verwendet, um die Algorithmen auf das FPGA zu portieren, was den Algorithmenentwicklungsprozess beschleunigt und eine schnelle Implementierung von Algorithmusvarianten ermöglicht. Evaluierungen haben gezeigt, dass das CereBridge-System in der Lage ist, die gesamte Signalverarbeitungskette zu integrieren, die fĂŒr verschiedene BCI-Anwendungen erforderlich ist. DarĂŒber hinaus kann es mit einer Batterie von mehr als 31 Stunden Dauerbetrieb betrieben werden, was es zu einer praktikablen Lösung fĂŒr mobile Langzeit-EEG-Aufzeichnungen und reale BCI-Studien macht.
Im Vergleich zu bestehenden Forschungsplattformen bietet das CereBridge-System eine bisher unerreichte LeistungsfĂ€higkeit und Ausstattung fĂŒr ein mobiles BCI. Es erfĂŒllt nicht nur die relevanten Anforderungen an ein mobiles BCI-System, sondern ebnet auch den Weg fĂŒr eine schnelle Ăbertragung von Algorithmen aus dem Labor in reale Anwendungen. Im Wesentlichen liefert diese Arbeit einen umfassenden Entwurf fĂŒr die Entwicklung und Implementierung eines hochmodernen mobilen EEG-basierten BCI-Systems und setzt damit einen neuen Standard fĂŒr BCI-Hardware, die in der Praxis eingesetzt werden kann.Brain-Computer Interfaces (BCIs) are innovative systems that enable direct communication between the brain and external devices. These interfaces have emerged as a transformative solution not only for individuals with neurological injuries, but also for a broader range of individuals, encompassing both medical and non-medical applications. Historically, the challenge of neurological injury being static after an initial recovery phase has driven researchers to explore innovative avenues. Since the 1970s, BCIs have been at one forefront of these efforts. As research has progressed, BCI applications have expanded, showing potential in a wide range of applications, including those for less severely disabled (e.g. in the context of hearing aids) and completely healthy individuals (e.g. entertainment industry). However, the future of BCI research also depends on the availability of reliable BCI hardware to ensure real-world application.
The CereBridge system designed and implemented in this work represents a significant leap forward in brain-computer interface technology by integrating all EEG signal acquisition and processing hardware into a mobile system. The processing hardware architecture is centered around an FPGA with an ARM Cortex-M3 within a heterogeneous IC, ensuring flexibility and efficiency in EEG signal processing. The modular design of the system, consisting of three individual boards, ensures adaptability to different requirements. With a focus on full mobility, the complete system is mounted on the scalp, can operate autonomously, requires no external interaction, and weighs approximately 56g, including 16 channel EEG sensors.
The proposed customizable dataflow concept facilitates the exploration and seamless integration of algorithms, increasing the flexibility of the system. This is further underscored by the ability to apply different algorithms to recorded EEG data to meet different application goals. High-Level Synthesis (HLS) was used to port algorithms to the FPGA, accelerating the algorithm development process and facilitating rapid implementation of algorithm variants. Evaluations have shown that the CereBridge system is capable of integrating the complete signal processing chain required for various BCI applications. Furthermore, it can operate continuously for more than 31 hours with a 1800mAh battery, making it a viable solution for long-term mobile EEG recording and real-world BCI studies.
Compared to existing research platforms, the CereBridge system offers unprecedented performance and features for a mobile BCI. It not only meets the relevant requirements for a mobile BCI system, but also paves the way for the rapid transition of algorithms from the laboratory to real-world applications. In essence, this work provides a comprehensive blueprint for the development and implementation of a state-of-the-art mobile EEG-based BCI system, setting a new benchmark in BCI hardware for real-world applicability
Mitigating the Event and Effect of Energy Holes in Multi-hop Wireless Sensor Networks Using an Ultra-Low Power Wake-up Receiver and an Energy Scheduling Technique
This research work presents an algorithm for extending network lifetime in multi-hop wireless sensor networks (WSN). WSNs face energy gap issues around sink nodes due to the transmission of large amounts of data through nearby sensor nodes. The limited power supply to the nodes limits the lifetime of the network, which makes energy efficiency crucial. Multi-hop communication has been proposed as an efficient strategy, but its power consumption remains a research challenge. In this study, an algorithm is developed to mitigate energy holes around the sink nodes by using a modified ultra-low-power wake-up receiver and an energy scheduling technique. Efficient power scheduling reduces the power consumption of the relay node, and when the residual power of the sensor node falls below a defined threshold, the power emitters charge the nodes to eliminate energy-hole problems. The modified wake-up receiver improves sensor sensitivity while staying within the micro-power budget. This study's simulations showed that the developed RF energy harvesting algorithm outperformed previous work, achieving a 30% improvement in average charged energy (AEC), a 0.41% improvement in average energy (AEH), an 8.39% improvement in the number of energy transmitters, an 8.59% improvement in throughput, and a 0.19 decrease in outage probability compared to the existing network lifetime enhancement of multi-hop wireless sensor networks by RF Energy Harvesting algorithm. Overall, the enhanced power efficiency technique significantly improves the performance of WSNs
Natural and Technological Hazards in Urban Areas
Natural hazard events and technological accidents are separate causes of environmental impacts. Natural hazards are physical phenomena active in geological times, whereas technological hazards result from actions or facilities created by humans. In our time, combined natural and man-made hazards have been induced. Overpopulation and urban development in areas prone to natural hazards increase the impact of natural disasters worldwide. Additionally, urban areas are frequently characterized by intense industrial activity and rapid, poorly planned growth that threatens the environment and degrades the quality of life. Therefore, proper urban planning is crucial to minimize fatalities and reduce the environmental and economic impacts that accompany both natural and technological hazardous events
LIPIcs, Volume 251, ITCS 2023, Complete Volume
LIPIcs, Volume 251, ITCS 2023, Complete Volum
MECHANICAL ENERGY HARVESTER FOR POWERING RFID SYSTEMS COMPONENTS: MODELING, ANALYSIS, OPTIMIZATION AND DESIGN
Finding alternative power sources has been an important topic of study worldwide. It is vital to find substitutes for finite fossil fuels. Such substitutes may be termed renewable energy sources and infinite supplies. Such limitless sources are derived from ambient energy like wind energy, solar energy, sea waves energy; on the other hand, smart cities megaprojects have been receiving enormous amounts of funding to transition our lives into smart lives. Smart cities heavily rely on smart devices and electronics, which utilize small amounts of energy to run. Using batteries as the power source for such smart devices imposes environmental and labor cost issues. Moreover, in many cases, smart devices are in hard-to-access places, making accessibility for disposal and replacement difficult. Finally, battery waste harms the environment.
To overcome these issues, vibration-based energy harvesters have been proposed and implemented. Vibration-based energy harvesters convert the dynamic or kinetic energy which is generated due to the motion of an object into electric energy. Energy transduction mechanisms can be delivered based on piezoelectric, electromagnetic, or electrostatic methods; the piezoelectric method is generally preferred to the other methods, particularly if the frequency fluctuations are considerable. In response, piezoelectric vibration-based energy harvesters (PVEHs), have been modeled and analyzed widely. However, there are two challenges with PVEH: the maximum amount of extractable voltage and the effective (operational) frequency bandwidth are often insufficient. In this dissertation, a new type of integrated multiple system comprised of a cantilever and spring-oscillator is proposed to improve and develop the performance of the energy harvester in terms of extractable voltage and effective frequency bandwidth. The new energy harvester model is proposed to supply sufficient energy to power low-power electronic devices like RFID components. Due to the temperature fluctuations, the thermal effect over the performance of the harvester is initially studied. To alter the resonance frequency of the harvester structure, a rotating element system is considered and analyzed. In the analytical-numerical analysis, Hamiltonâs principle along with Galerkinâs decomposition approach are adopted to derive the governing equations of the harvester motion and corresponding electric circuit. It is observed that integration of the spring-oscillator subsystem alters the boundary condition of the cantilever and subsequently reforms the resulting characteristic equation into a more complicated nonlinear transcendental equation. To find the resonance frequencies, this equation is solved numerically in MATLAB. It is observed that the inertial effects of the oscillator rendered to the cantilever via the restoring force effects of the spring significantly alter vibrational features of the harvester. Finally, the voltage frequency response function is analytically and numerically derived in a closed-from expression. Variations in parameter values enable the designer to mutate resonance frequencies and mode shape functions as desired. This is particularly important, since the generated energy from a PVEH is significant only if the excitation frequency coming from an external source matches the resonance (natural) frequency of the harvester structure. In subsequent sections of this work, the oscillator mass and spring stiffness are considered as the design parameters to maximize the harvestable voltage and effective frequency bandwidth, respectively. For the optimization, a genetic algorithm is adopted to find the optimal values. Since the voltage frequency response function cannot be implemented in a computer algorithm script, a suitable function approximator (regressor) is designed using fuzzy logic and neural networks. The voltage function requires manual assistance to find the resonance frequency and cannot be done automatically using computer algorithms. Specifically, to apply the numerical root-solver, one needs to manually provide the solver with an initial guess. Such an estimation is accomplished using a plot of the characteristic equation along with human visual inference. Thus, the entire process cannot be automated. Moreover, the voltage function encompasses several coefficients making the process computationally expensive. Thus, training a supervised machine learning regressor is essential. The trained regressor using adaptive-neuro-fuzzy-inference-system (ANFIS) is utilized in the genetic optimization procedure. The optimization problem is implemented, first to find the maximum voltage and second to find the maximum widened effective frequency bandwidth, which yields the optimal oscillator mass value along with the optimal spring stiffness value. As there is often no control over the external excitation frequency, it is helpful to design an adaptive energy harvester. This means that, considering a specific given value of the excitation frequency, energy harvester system parameters (oscillator mass and spring stiffness) need to be adjusted so that the resulting natural (resonance) frequency of the system aligns with the given excitation frequency. To do so, the given excitation frequency value is considered as the input and the system parameters are assumed as outputs which are estimated via the neural network fuzzy logic regressor. Finally, an experimental setup is implemented for a simple pure cantilever energy harvester triggered by impact excitations. Unlike the theoretical section, the experimental excitation is considered to be an impact excitation, which is a random process. The rationale for this is that, in the real world, the external source is a random trigger. Harmonic base excitations used in the theoretical chapters are to assess the performance of the energy harvester per standard criteria. To evaluate the performance of a proposed energy harvester model, the input excitation type consists of harmonic base triggers. In summary, this dissertation discusses several case studies and addresses key issues in the design of optimized piezoelectric vibration-based energy harvesters (PVEHs). First, an advanced model of the integrated systems is presented with equation derivations. Second, the proposed model is decomposed and analyzed in terms of mechanical and electrical frequency response functions. To do so, analytic-numeric methods are adopted. Later, influential parameters of the integrated system are detected. Then the proposed model is optimized with respect to the two vital criteria of maximum amount of extractable voltage and widened effective (operational) frequency bandwidth. Corresponding design (influential) parameters are found using neural network fuzzy logic along with genetic optimization algorithms, i.e., a soft computing method. The accuracy of the trained integrated algorithms is verified using the analytical-numerical closed-form expression of the voltage function. Then, an adaptive piezoelectric vibration-based energy harvester (PVEH) is designed. This final design pertains to the cases where the excitation (driving) frequency is given and constant, so the desired goal is to match the natural frequency of the system with the given driving frequency. In this response, a regressor using neural network fuzzy logic is designed to find the proper design parameters. Finally, the experimental setup is implemented and tested to report the maximum voltage harvested in each test execution
Challenges and Limitation Analysis of an IoT-Dependent System for Deployment in Smart Healthcare Using Communication Standards Features
The use of IoT technology is rapidly increasing in healthcare development and smart
healthcare system for fitness programs, monitoring, data analysis, etc. To improve the efficiency
of monitoring, various studies have been conducted in this field to achieve improved precision.
The architecture proposed herein is based on IoT integrated with a cloud system in which power
absorption and accuracy are major concerns. We discuss and analyze development in this domain
to improve the performance of IoT systems related to health care. Standards of communication for
IoT data transmission and reception can help to understand the exact power absorption in different
devices to achieve improved performance for healthcare development. We also systematically analyze
the use of IoT in healthcare systems using cloud features, as well as the performance and limitations
of IoT in this field. Furthermore, we discuss the design of an IoT system for efficient monitoring of
various healthcare issues in elderly people and limitations of an existing system in terms of resources,
power absorption and security when implemented in different devices as per requirements. Blood
pressure and heartbeat monitoring in pregnant women are examples of high-intensity applications
of NB-IoT (narrowband IoT), technology that supports widespread communication with a very
low data cost and minimum processing complexity and battery lifespan. This article also focuses
on analysis of the performance of narrowband IoT in terms of delay and throughput using singleand
multinode approaches. We performed analysis using the message queuing telemetry transport
protocol (MQTTP), which was found to be efficient compared to the limited application protocol
(LAP) in sending information from sensors.Ministerio Español de Ciencia e Innovación under project
number PID2020-115570GB-C22 (DemocratAI::UGR)CĂĄtedra de Empresa TecnologĂa para
las Personas (UGR-Fujitsu
Human Activity Recognition and Fall Detection Using Unobtrusive Technologies
As the population ages, health issues like injurious falls demand more attention. Wearable devices can be used to detect falls. However, despite their commercial success, most wearable devices are obtrusive, and patients generally do not like or may forget to wear them. In this thesis, a monitoring system consisting of two 24Ă32 thermal array sensors and a millimetre-wave (mmWave) radar sensor was developed to unobtrusively detect locations and recognise human activities such as sitting, standing, walking, lying, and falling. Data were collected by observing healthy young volunteers simulate ten different scenarios. The optimal installation position of the sensors was initially unknown. Therefore, the sensors were mounted on a side wall, a corner, and on the ceiling of the experimental room to allow performance comparison between these sensor placements. Every thermal frame was converted into an image and a set of features was manually extracted or convolutional neural networks (CNNs) were used to automatically extract features. Applying a CNN model on the infrared stereo dataset to recognise five activities (falling plus lying on the floor, lying in bed, sitting on chair, sitting in bed, standing plus walking), overall average accuracy and F1-score were 97.6%, and 0.935, respectively. The scores for detecting falling plus lying on the floor from the remaining activities were 97.9%, and 0.945, respectively. When using radar technology, the generated point clouds were converted into an occupancy grid and a CNN model was used to automatically extract features, or a set of features was manually extracted. Applying several classifiers on the manually extracted features to detect falling plus lying on the floor from the remaining activities, Random Forest (RF) classifier achieved the best results in overhead position (an accuracy of 92.2%, a recall of 0.881, a precision of 0.805, and an F1-score of 0.841). Additionally, the CNN model achieved the best results (an accuracy of 92.3%, a recall of 0.891, a precision of 0.801, and an F1-score of 0.844), in overhead position and slightly outperformed the RF method. Data fusion was performed at a feature level, combining both infrared and radar technologies, however the benefit was not significant. The proposed system was cost, processing time, and space efficient. The system with further development can be utilised as a real-time fall detection system in aged care facilities or at homes of older people
- âŠ