533 research outputs found
Constellation Shaping for WDM systems using 256QAM/1024QAM with Probabilistic Optimization
In this paper, probabilistic shaping is numerically and experimentally
investigated for increasing the transmission reach of wavelength division
multiplexed (WDM) optical communication system employing quadrature amplitude
modulation (QAM). An optimized probability mass function (PMF) of the QAM
symbols is first found from a modified Blahut-Arimoto algorithm for the optical
channel. A turbo coded bit interleaved coded modulation system is then applied,
which relies on many-to-one labeling to achieve the desired PMF, thereby
achieving shaping gain. Pilot symbols at rate at most 2% are used for
synchronization and equalization, making it possible to receive input
constellations as large as 1024QAM. The system is evaluated experimentally on a
10 GBaud, 5 channels WDM setup. The maximum system reach is increased w.r.t.
standard 1024QAM by 20% at input data rate of 4.65 bits/symbol and up to 75% at
5.46 bits/symbol. It is shown that rate adaptation does not require changing of
the modulation format. The performance of the proposed 1024QAM shaped system is
validated on all 5 channels of the WDM signal for selected distances and rates.
Finally, it was shown via EXIT charts and BER analysis that iterative
demapping, while generally beneficial to the system, is not a requirement for
achieving the shaping gain.Comment: 10 pages, 12 figures, Journal of Lightwave Technology, 201
A Novel Constellation Shaping Technique for Bit-Interleaved Coded Modulation
International audienceWe present a new and simple method which consists to apply constellation shaping to bit-interleaved turbo-coded modulation (BICTM) over additive white Gaussian noise channels. By assuming the example of a 3-bit/dim 16-PAM BITCM, it is shown that this technique can provide shaping gain of 0.79 dB
Constellation design for future communication systems: a comprehensive survey
[EN] The choice of modulation schemes is a fundamental building block of wireless communication
systems. As a key component of physical layer design, they critically impact the expected communication
capacity and wireless signal robustness. Their design is also critical for the successful roll-out of wireless
standards that require a compromise between performance, efficiency, latency, and hardware requirements.
This paper presents a survey of constellation design strategies and associated outcomes for wireless
communication systems. The survey discusses their performance and complexity to address the need for
some desirable properties, including consistency, channel capacity, system performance, required demapping
architecture, flexibility, and independence. Existing approaches for constellation designs are investigated
using appropriate metrics and categorized based on their theoretical algorithm design. Next, their application
to different communication standards is analyzed in context, aiming at distilling general guidelines applicable
to the wireless building block design. Finally, the survey provides a discussion on design directions for future
communication system standardization processes.This work was supported in part by the Basque Government under Grant IT1234-19, in part by the PREDOC under
Program PRE_2020_2_0105, and in part by the Spanish Government through the Project PHANTOM (MCIU/AEI/FEDER, UE) under Gran
Optimization of a Coded-Modulation System with Shaped Constellation
Conventional communication systems transmit signals that are selected from a signal constellation with uniform probability. However, information-theoretic results suggest that performance may be improved by shaping the constellation such that lower-energy signals are selected more frequently than higher-energy signals. This dissertation presents an energy efficient approach for shaping the constellations used by coded-modulation systems. The focus is on designing shaping techniques for systems that use a combination of amplitude phase shift keying (APSK) and low-density parity check (LDPC) coding. Such a combination is typical of modern satellite communications, such as the system used by the DVB-S2 standard.;The system implementation requires that a subset of the bits at the output of the LDPC encoder are passed through a nonlinear shaping encoder whose output bits are more likely to be a zero than a one. The constellation is partitioned into a plurality of sub-constellations, each with a different average signal energy, and the shaping bits are used to select the sub-constellation. An iterative receiver exchanges soft information among the demodulator, LDPC decoder, and shaping decoder. Parameters associated with the modulation and shaping code are optimized with respect to information rate, while the design of the LDPC code is optimized for the shaped modulation with the assistance of extrinsic-information transfer (EXIT) charts. The rule for labeling the constellation with bits is optimized using a novel hybrid cost function and a binary switching algorithm.;Simulation results show that the combination of constellation shaping, LDPC code optimization, and optimized bit labeling can achieve a gain in excess of 1 dB in an additive white Gaussian noise (AWGN) channel at a rate of 3 bits/symbol compared with a system that adheres directly to the DVB-S2 standard
Advanced constellation and demapper schemes for next generation digital terrestrial television broadcasting systems
206 p.Esta tesis presenta un nuevo tipo de constelaciones llamadas no uniformes. Estos esquemas presentan una eficacia de hasta 1,8 dB superior a las utilizadas en los últimos sistemas de comunicaciones de televisión digital terrestre y son extrapolables a cualquier otro sistema de comunicaciones (satélite, móvil, cable¿). Además, este trabajo contribuye al diseño de constelaciones con una nueva metodologÃa que reduce el tiempo de optimización de dÃas/horas (metodologÃas actuales) a horas/minutos con la misma eficiencia. Todas las constelaciones diseñadas se testean bajo una plataforma creada en esta tesis que simula el estándar de radiodifusión terrestre más avanzado hasta la fecha (ATSC 3.0) bajo condiciones reales de funcionamiento.Por otro lado, para disminuir la latencia de decodificación de estas constelaciones esta tesis propone dos técnicas de detección/demapeo. Una es para constelaciones no uniformes de dos dimensiones la cual disminuye hasta en un 99,7% la complejidad del demapeo sin empeorar el funcionamiento del sistema. La segunda técnica de detección se centra en las constelaciones no uniformes de una dimensión y presenta hasta un 87,5% de reducción de la complejidad del receptor sin pérdidas en el rendimiento.Por último, este trabajo expone un completo estado del arte sobre tipos de constelaciones, modelos de sistema, y diseño/demapeo de constelaciones. Este estudio es el primero realizado en este campo
Protograph-Based LDPC Code Design for Shaped Bit-Metric Decoding
A protograph-based low-density parity-check (LDPC) code design technique for
bandwidth-efficient coded modulation is presented. The approach jointly
optimizes the LDPC code node degrees and the mapping of the coded bits to the
bit-interleaved coded modulation (BICM) bit-channels. For BICM with uniform
input and for BICM with probabilistic shaping, binary-input symmetric-output
surrogate channels for the code design are used. The constructed codes for
uniform inputs perform as good as the multi-edge type codes of Zhang and
Kschischang (2013). For 8-ASK and 64-ASK with probabilistic shaping, codes of
rates 2/3 and 5/6 with blocklength 64800 are designed, which operate within
0.63dB and 0.69dB of continuous AWGN capacity for a target frame error rate of
1e-3 at spectral efficiencies of 1.38 and 4.25 bits/channel use, respectively.Comment: 9 pages, 10 figures. arXiv admin note: substantial text overlap with
arXiv:1501.0559
- …