Spatio-temporal dependencies in functional connectivity in rodent cortical cultures

Models of functional connectivity in cortical cultures on multi-electrodes arrays may aid in understanding how cognitive pathways form and improve techniques that aim to interface with neuronal systems. To enable research on such models, this study uses both data- and model-driven approaches to determine what dependencies are present in and between functional connectivity networks derived from bursts of extracellularly recorded activity. Properties of excitation in bursts were analysed using correlative techniques to assess the degree of linear dependence and then two parallel techniques were used to assess functional connectivity. Three models presenting increasing levels of spatio-temporal dependency were used to capture the dynamics of individual functional connections and their consistencies were verified using surrogate data. By comparing network-wide properties between model generated networks and functional networks from data, complex interdependencies were revealed. This indicates the persistent co-activation of neuronal pathways in spontaneous bursts, as can be found in whole brain structures

On Capacity and Delay of Multi-channel Wireless Networks with Infrastructure Support

In this paper, we propose a novel multi-channel network with infrastructure support, called an MC-IS network, which has not been studied in the literature. To the best of our knowledge, we are the first to study such an MC-IS network. Our proposed MC-IS network has a number of advantages over three existing conventional networks, namely a single-channel wireless ad hoc network (called an SC-AH network), a multi-channel wireless ad hoc network (called an MC-AH network) and a single-channel network with infrastructure support (called an SC-IS network). In particular, the network capacity of our proposed MC-IS network is $\sqrt{n \log n}$ times higher than that of an SC-AH network and an MC-AH network and the same as that of an SC-IS network, where $n$ is the number of nodes in the network. The average delay of our MC-IS network is $\sqrt{\log n/n}$ times lower than that of an SC-AH network and an MC-AH network, and $\min\{C_I,m\}$ times lower than the average delay of an SC-IS network, where $C_I$ and $m$ denote the number of channels dedicated for infrastructure communications and the number of interfaces mounted at each infrastructure node, respectively. Our analysis on an MC-IS network equipped with omni-directional antennas only has been extended to an MC-IS network equipped with directional antennas only, which are named as an MC-IS-DA network. We show that an MC-IS-DA network has an even lower delay of $\frac{c}{\lfloor \frac{2\pi}{\theta}\rfloor \cdot C_I}$ compared with an SC-IS network and our MC-IS network. For example, when $C_I=12$ and $\theta=\frac{\pi}{12}$, an MC-IS-DA network can further reduce the delay by 24 times lower that of an MC-IS network and reduce the delay by 288 times lower than that of an SC-IS network.Comment: accepted, IEEE Transactions on Vehicular Technology, 201

Device-Aware Routing and Scheduling in Multi-Hop Device-to-Device Networks

The dramatic increase in data and connectivity demand, in addition to heterogeneous device capabilities, poses a challenge for future wireless networks. One of the promising solutions is Device-to-Device (D2D) networking. D2D networking, advocating the idea of connecting two or more devices directly without traversing the core network, is promising to address the increasing data and connectivity demand. In this paper, we consider D2D networks, where devices with heterogeneous capabilities including computing power, energy limitations, and incentives participate in D2D activities heterogeneously. We develop (i) a device-aware routing and scheduling algorithm (DARS) by taking into account device capabilities, and (ii) a multi-hop D2D testbed using Android-based smartphones and tablets by exploiting Wi-Fi Direct and legacy Wi-Fi connections. We show that DARS significantly improves throughput in our testbed as compared to state-of-the-art

Integration of Carrier Aggregation and Dual Connectivity for the ns-3 mmWave Module

Thanks to the wide availability of bandwidth, the millimeter wave (mmWave) frequencies will provide very high data rates to mobile users in next generation 5G cellular networks. However, mmWave links suffer from high isotropic pathloss and blockage from common materials, and are subject to an intermittent channel quality. Therefore, protocols and solutions at different layers in the cellular network and the TCP/IP protocol stack have been proposed and studied. A valuable tool for the end-to-end performance analysis of mmWave cellular networks is the ns-3 mmWave module, which already models in detail the channel, Physical (PHY) and Medium Access Control (MAC) layers, and extends the Long Term Evolution (LTE) stack for the higher layers. In this paper we present an implementation for the ns-3 mmWave module of multi connectivity techniques for 3GPP New Radio (NR) at mmWave frequencies, namely Carrier Aggregation (CA) and Dual Connectivity (DC), and discuss how they can be integrated to increase the functionalities offered by the ns-3 mmWave module.Comment: 9 pages, 7 figures, submitted to the Workshop on ns-3 (WNS3) 201

Multi-channel Wireless Networks with Infrastructure Support: Capacity and Delay

In this paper, we propose a novel multi-channel network with infrastructure support, called an \textit{MC-IS} network, which has not been studied in the literature. To the best of our knowledge, we are the first to study such an \textit{MC-IS} network. Our \textit{MC-IS} network is equipped with a number of infrastructure nodes which can communicate with common nodes using a number of channels where a communication between a common node and an infrastructure node is called an infrastructure communication and a communication between two common nodes is called an ad-hoc communication. Our proposed \textit{MC-IS} network has a number of advantages over three existing conventional networks, namely a single-channel wireless ad hoc network (called an \textit{SC-AH} network), a multi-channel wireless ad hoc network (called an \textit{MC-AH} network) and a single-channel network with infrastructure support (called an \textit{SC-IS} network). In particular, the \textit{network capacity} of our proposed \textit{MC-IS} network is $\sqrt{n \log n}$ times higher than that of an \textit{SC-AH} network and an \textit{MC-AH} network and the same as that of an \textit{SC-IS} network, where $n$ is the number of nodes in the network. The \textit{average delay} of our \textit{MC-IS} network is $\sqrt{\log n/n}$ times lower than that of an \textit{SC-AH} network and an \textit{MC-AH} network, and $\min(C_I,m)$ times lower than the average delay of an \textit{SC-IS} network, where $C_I$ and $m$ denote the number of channels dedicated for infrastructure communications and the number of interfaces mounted at each infrastructure node, respectively.Comment: 12 pages, 6 figures, 3 table

Deliverable JRA1.1: Evaluation of current network control and management planes for multi-domain network infrastructure

This deliverable includes a compilation and evaluation of available control and management architectures and protocols applicable to a multilayer infrastructure in a multi-domain Virtual Network environment.The scope of this deliverable is mainly focused on the virtualisation of the resources within a network and at processing nodes. The virtualization of the FEDERICA infrastructure allows the provisioning of its available resources to users by means of FEDERICA slices. A slice is seen by the user as a real physical network under his/her domain, however it maps to a logical partition (a virtual instance) of the physical FEDERICA resources. A slice is built to exhibit to the highest degree all the principles applicable to a physical network (isolation, reproducibility, manageability, ...). Currently, there are no standard definitions available for network virtualization or its associated architectures. Therefore, this deliverable proposes the Virtual Network layer architecture and evaluates a set of Management- and Control Planes that can be used for the partitioning and virtualization of the FEDERICA network resources. This evaluation has been performed taking into account an initial set of FEDERICA requirements; a possible extension of the selected tools will be evaluated in future deliverables. The studies described in this deliverable define the virtual architecture of the FEDERICA infrastructure. During this activity, the need has been recognised to establish a new set of basic definitions (taxonomy) for the building blocks that compose the so-called slice, i.e. the virtual network instantiation (which is virtual with regard to the abstracted view made of the building blocks of the FEDERICA infrastructure) and its architectural plane representation. These definitions will be established as a common nomenclature for the FEDERICA project. Other important aspects when defining a new architecture are the user requirements. It is crucial that the resulting architecture fits the demands that users may have. Since this deliverable has been produced at the same time as the contact process with users, made by the project activities related to the Use Case definitions, JRA1 has proposed a set of basic Use Cases to be considered as starting point for its internal studies. When researchers want to experiment with their developments, they need not only network resources on their slices, but also a slice of the processing resources. These processing slice resources are understood as virtual machine instances that users can use to make them behave as software routers or end nodes, on which to download the software protocols or applications they have produced and want to assess in a realistic environment. Hence, this deliverable also studies the APIs of several virtual machine management software products in order to identify which best suits FEDERICA’s needs.Postprint (published version

Experimentation with MANETs of Smartphones

Mobile AdHoc NETworks (MANETs) have been identified as a key emerging technology for scenarios in which IEEE 802.11 or cellular communications are either infeasible, inefficient, or cost-ineffective. Smartphones are the most adequate network nodes in many of these scenarios, but it is not straightforward to build a network with them. We extensively survey existing possibilities to build applications on top of ad-hoc smartphone networks for experimentation purposes, and introduce a taxonomy to classify them. We present AdHocDroid, an Android package that creates an IP-level MANET of (rooted) Android smartphones, and make it publicly available to the community. AdHocDroid supports standard TCP/IP applications, providing real smartphone IEEE 802.11 MANET and the capability to easily change the routing protocol. We tested our framework on several smartphones and a laptop. We validate the MANET running off-the-shelf applications, and reporting on experimental performance evaluation, including network metrics and battery discharge rate.Comment: 6 pages, 7 figures, 1 tabl