Conformal phased array with beam forming for airborne satellite communication

For enhanced communication on board of aircraft novel antenna systems with broadband satellite-based capabilities are required. The installation of such systems on board of aircraft requires the development of a very low-profile aircraft antenna, which can point to satellites anywhere in the upper hemisphere. To this end, phased array antennas which are conformal to the aircraft fuselage are attractive. In this paper two key aspects of conformal phased array antenna arrays are addressed: the development of a broadband Ku-band antenna and the beam synthesis for conformal array antennas. The antenna elements of the conformal array are stacked patch antennas with dual linear polarization which have sufficient bandwidth. For beam forming synthesis a method based on a truncated Singular Value Decomposition is proposed

Architectures for ku-band broadband airborne satellite communication antennas

This paper describes different architectures for a broadband antenna for satellite communication on aircraft. The antenna is a steerable (conformal) phased array antenna in Ku-band (receive-only). First the requirements for such a system are addressed. Subsequently a number of potential architectures are discussed in detail: a) an architecture with only optical true time delays, b) an architecture with optical phase shifters and optical true time delays and c) an architecture with optical true time delays and RF phase\ud shifters (or RF true time delays). The last two architectures use sub-arrays to reduce complexity of the antenna system. The advantages and disadvantages of the different architectures are evaluated and an optimal architecture is selected

Design of a ring resonator-based optical beam forming network for phased array receive antennas

A novel squint-free ring resonator-based optical beam forming network (OBFN) for phased array antennas (PAA) is proposed. It is intended to provide broadband connectivity to airborne platforms via geostationary satellites. In this paper, we present the design of the OBFN and its control system. Our goal is to deliver large bandwidth Ku-band connectivity between antennas, mount conformal to the airplane fuselage and on a geostationary satellite, respectively.This way it would be possible to bring live DVB-S television to airplane passengers. In this paper, we present recent research conducted on a 4 × 1 ring resonator-based OBFN test set-up. This OBFN has four optical input ports and one optical output port. It is tuned to provide the desired signal combination with optimal constructive interference between the modulated input signals from the PAA. Therefore, combining circuitry and delay elements are required. The OBFN is tuned by electrically heating tunable true time delay (TTD) elements. These are built using optical ring resonators (ORRs). By cascading multiple ORRs with different resonance frequencies, it is possible to create a TTD with a large bandwidth. Optical beam forming is used because it provides advantages over traditional beam forming methods. These advantages are: large bandwidth, EMI resistance, and, when integrated onto a single chip, compactness and low costs. The OBFN is created using planar optical waveguide technology and consists of the following building blocks: waveguides, Mach-Zehnder interferometers, (MZIs) couplers and ORRs. The tuning of the OBFN is done by an electronic control system using a microcontroller. Communication with a PC is possible using USB. To our knowledge, this is the first integrated ORR-based OBFN circuit for PAA satellite reception

Space-Air-Ground Integrated 6G Wireless Communication Networks: A Review of Antenna Technologies and Application Scenarios

A review of technological solutions and advances in the framework of a Vertical Heterogeneous Network (VHetNet) integrating satellite, airborne and terrestrial networks is presented. The disruptive features and challenges offered by a fruitful cooperation among these segments within a ubiquitous and seamless wireless connectivity are described. The available technologies and the key research directions for achieving global wireless coverage by considering all these layers are thoroughly discussed. Emphasis is placed on the available antenna systems in satellite, airborne and ground layers by highlighting strengths and weakness and by providing some interesting trends in research. A summary of the most suitable applicative scenarios for future 6G wireless communications are finally illustrated

Evolution of Satellite Communication Antennas on Mobile Ground Terminals

Getting connected whenever and wherever you travel is not kind of luxury any more. Satellite communication researchers are making it a reality to bring you data, video, and voice services when you are away from home, out of office, or on a long journey. Satellite communication antenna mounted on mobile ground terminals is an essential prerequisite of successful connectivity. In this paper, we review the evolution of this kind of antenna in its historical context and outline the major research achievements on ground mobile terminals. Many striking demonstrations and prototypes are revisited to understand the emerging technologies and assess their potential towards practical implementations. The future trends and challenges are also discussed

Multi-Layer Ultra-Wideband Wilkinson Combiner for Arrays

This work investigates an ultra-wideband (UWB), compact, and multilayer Wilkinson power combiners for tightly coupled array (TCA) designs. The Wilkinson topology designs encompass UHF, L-, and S-bands. These combiners integrate into an experimental UWB TCA. The experimental UWB TCA divides into twenty-four columns, with each column containing eight unit cells, and each cell one-inch square. The Wilkinson power combiner contains eight input ports and one output port. Twenty-four combiners mount to the TCA’s back. The combiner condenses the two-dimensional array (8x24) to a one-dimensional or linear array (1x24). The proposed Wilkinson power combiner possesses a multilayer design reducing common mode current problems caused by vias. The Wilkinson combiner covers 500 MHz to 3.28 GHz and provides a 6.56:1 bandwidth. It achieves tight impedance matching through stripline coupling. The proposed design provides minimal phase error, equal power reception, and low power handling. The power combiner interfaces with an experimental UWB TCA antenna through SMP snap connectors. This paper examines signal combining efficiency to provide minimum path loss. This paper also examines interconnecting transmission lines traversing multiple laminate layers. This necessitates proper current handling because interconnects influence impedance, transmission, and isolation. Integrating a via picket fence improves port isolation and reduces propagating parallel plate modes. The proposed combiner design achieved the following important attributes at or better than the minimum required specifications. The measured combiner design successfully demonstrated -7.8dB minimum return loss for input and -18.1dB return loss for the outputs; 10.92dB ± 1.28dB insertion loss; -12.2db minimum isolation; ± 1.38° minimal phase error; ± 0.57dB power reception imbalance. The proposed UWB combiner design condensed the four-stage Wilkinson footprint to consume no more than 0.4in² (258mm²) surface area, weighed only 1.5oz (42.5g), and less than a half-inch thick

Optical phase synchronization in coherent optical beamformers for phased array receive antennas

Optical phase synchronization is an important issue in coherent optical beamforming systems. In this kind of architectures, the optical carrier produced by a common laser is split and then modulated by the RF signals coming from different antenna elements, delayed as desired, and combined in couplers. At the combining points it is fundamental that the optical carriers on the two branches are in phase, so that constructive interference can occur at the detector, resulting in maximized optical power and, as a consequence, maximized RF signal power. The issue of optical phase synchronization becomes particularly sensitive when dealing with hybrid setups, where the integrated optical chips are connected by means of optical fibers. In this case, a number of causes concur to de-synchronize the optical phases, originating destructive interference and dramatically reducing the output signal-to-noise ratio of the system. In this thesis, several solutions to this problem are proposed and analyzed. The total power feedback loop technique is then chosen as the most suitable approach, and shown to be a valid solution to synchronize the optical phases. Several feedback algorithms are analyzed and simulated in their pros and cons, and then an optimum hybrid algorithm is chosen to allow, at the same time, local maxima avoidance and fast tracking against phase drifts. The performance of this solution was first simulated, optimized in its parameters and nally implemented and tested in the real system. This work proved that, by means of the designed feedback loop, the optical output power is successfully stabilized at the maximum value despite the drifting in the hybrid setup parameters.Ingeniería de Telecomunicació