211 research outputs found
The Road Ahead for Networking: A Survey on ICN-IP Coexistence Solutions
In recent years, the current Internet has experienced an unexpected paradigm
shift in the usage model, which has pushed researchers towards the design of
the Information-Centric Networking (ICN) paradigm as a possible replacement of
the existing architecture. Even though both Academia and Industry have
investigated the feasibility and effectiveness of ICN, achieving the complete
replacement of the Internet Protocol (IP) is a challenging task.
Some research groups have already addressed the coexistence by designing
their own architectures, but none of those is the final solution to move
towards the future Internet considering the unaltered state of the networking.
To design such architecture, the research community needs now a comprehensive
overview of the existing solutions that have so far addressed the coexistence.
The purpose of this paper is to reach this goal by providing the first
comprehensive survey and classification of the coexistence architectures
according to their features (i.e., deployment approach, deployment scenarios,
addressed coexistence requirements and architecture or technology used) and
evaluation parameters (i.e., challenges emerging during the deployment and the
runtime behaviour of an architecture). We believe that this paper will finally
fill the gap required for moving towards the design of the final coexistence
architecture.Comment: 23 pages, 16 figures, 3 table
On Cloud-based multisource Reliable Multicast Transport in Broadband Multimedia Satellite Networks
Multimedia synchronization, Software Over the Air, Personal Information Management on Cloud networks require new reliable protocols, which reduce the traffic load in the core and edge network. This work shows via simulations the performance of an efficient multicast file delivery, which advantage of the distributed file storage in Cloud computing. The performance evaluation focuses on the case of a personal satellite equipment with error prone channels
Survey of Inter-satellite Communication for Small Satellite Systems: Physical Layer to Network Layer View
Small satellite systems enable whole new class of missions for navigation,
communications, remote sensing and scientific research for both civilian and
military purposes. As individual spacecraft are limited by the size, mass and
power constraints, mass-produced small satellites in large constellations or
clusters could be useful in many science missions such as gravity mapping,
tracking of forest fires, finding water resources, etc. Constellation of
satellites provide improved spatial and temporal resolution of the target.
Small satellite constellations contribute innovative applications by replacing
a single asset with several very capable spacecraft which opens the door to new
applications. With increasing levels of autonomy, there will be a need for
remote communication networks to enable communication between spacecraft. These
space based networks will need to configure and maintain dynamic routes, manage
intermediate nodes, and reconfigure themselves to achieve mission objectives.
Hence, inter-satellite communication is a key aspect when satellites fly in
formation. In this paper, we present the various researches being conducted in
the small satellite community for implementing inter-satellite communications
based on the Open System Interconnection (OSI) model. This paper also reviews
the various design parameters applicable to the first three layers of the OSI
model, i.e., physical, data link and network layer. Based on the survey, we
also present a comprehensive list of design parameters useful for achieving
inter-satellite communications for multiple small satellite missions. Specific
topics include proposed solutions for some of the challenges faced by small
satellite systems, enabling operations using a network of small satellites, and
some examples of small satellite missions involving formation flying aspects.Comment: 51 pages, 21 Figures, 11 Tables, accepted in IEEE Communications
Surveys and Tutorial
Lifeguard: Local Health Awareness for More Accurate Failure Detection
SWIM is a peer-to-peer group membership protocol with attractive scaling and
robustness properties. However, slow message processing can cause SWIM to mark
healthy members as failed (so called false positive failure detection), despite
inclusion of a mechanism to avoid this.
We identify the properties of SWIM that lead to the problem, and propose
Lifeguard, a set of extensions to SWIM which consider that the local failure
detector module may be at fault, via the concept of local health. We evaluate
this approach in a precisely controlled environment and validate it in a
real-world scenario, showing that it drastically reduces the rate of false
positives. The false positive rate and detection time for true failures can be
reduced simultaneously, compared to the baseline levels of SWIM
Mobile Ad-Hoc Networks
Being infrastructure-less and without central administration control, wireless ad-hoc networking is playing a more and more important role in extending the coverage of traditional wireless infrastructure (cellular networks, wireless LAN, etc). This book includes state-of-the-art techniques and solutions for wireless ad-hoc networks. It focuses on the following topics in ad-hoc networks: quality-of-service and video communication, routing protocol and cross-layer design. A few interesting problems about security and delay-tolerant networks are also discussed. This book is targeted to provide network engineers and researchers with design guidelines for large scale wireless ad hoc networks
A RELIABILITY-BASED ROUTING PROTOCOL FOR VEHICULAR AD-HOC NETWORKS
Vehicular Ad hoc NETworks (VANETs), an emerging technology, would allow vehicles to form a self-organized network without the aid of a permanent infrastructure. As a prerequisite to communication in VANETs, an efficient route between communicating nodes in the network must be established, and the routing protocol must adapt to the rapidly changing topology of vehicles in motion. This is one of the goals of VANET routing protocols. In this thesis, we present an efficient routing protocol for VANETs, called the Reliable Inter-VEhicular Routing (RIVER) protocol. RIVER utilizes an undirected graph that represents the surrounding street layout where the vertices of the graph are points at which streets curve or intersect, and the graph edges represent the street segments between those vertices. Unlike existing protocols, RIVER performs real-time, active traffic monitoring and uses this data and other data gathered through passive mechanisms to assign a reliability rating to each street edge. The protocol then uses these reliability ratings to select the most reliable route. Control messages are used to identify a node’s neighbors, determine the reliability of street edges, and to share street edge reliability information with other nodes
Architectures and Key Technical Challenges for 5G Systems Incorporating Satellites
Satellite Communication systems are a promising solution to extend and
complement terrestrial networks in unserved or under-served areas. This aspect
is reflected by recent commercial and standardisation endeavours. In
particular, 3GPP recently initiated a Study Item for New Radio-based, i.e., 5G,
Non-Terrestrial Networks aimed at deploying satellite systems either as a
stand-alone solution or as an integration to terrestrial networks in mobile
broadband and machine-type communication scenarios. However, typical satellite
channel impairments, as large path losses, delays, and Doppler shifts, pose
severe challenges to the realisation of a satellite-based NR network. In this
paper, based on the architecture options currently being discussed in the
standardisation fora, we discuss and assess the impact of the satellite channel
characteristics on the physical and Medium Access Control layers, both in terms
of transmitted waveforms and procedures for enhanced Mobile BroadBand (eMBB)
and NarrowBand-Internet of Things (NB-IoT) applications. The proposed analysis
shows that the main technical challenges are related to the PHY/MAC procedures,
in particular Random Access (RA), Timing Advance (TA), and Hybrid Automatic
Repeat reQuest (HARQ) and, depending on the considered service and
architecture, different solutions are proposed.Comment: Submitted to Transactions on Vehicular Technologies, April 201
Performance Assessment of Routing Protocols for IoT/6LoWPAN Networks
The Internet of Things (IoT) proposes a disruptive communication paradigm that allows
smart objects to exchange data among themselves to reach a common goal. IoT application
scenarios are multiple and can range from a simple smart home lighting system to fully controlled
automated manufacturing chains. In the majority of IoT deployments, things are equipped with
small devices that can suffer from severe hardware and energy restrictions that are responsible
for performing data processing and wireless communication tasks. Thus, due to their features,
communication networks that are used by these devices are generally categorized as Low Power
and Lossy Networks (LLNs).
The considerable variation in IoT applications represents a critical issue to LLN networks,
which should offer support to different requirements as well as keeping reasonable
quality-of-service (QoS) levels. Based on this challenge, routing protocols represent a key issue
in IoT scenarios deployment. Routing protocols are responsible for creating paths among devices
and their interactions. Hence, network performance and features are highly dependent
on protocol behavior. Also, based on the adopted protocol, the support for some specific requirements
of IoT applications may or may not be provided. Thus, a routing protocol should be
projected to attend the needs of the applications considering the limitations of the device that
will execute them.
Looking to attend the demand of routing protocols for LLNs and, consequently, for IoT
networks, the Internet Engineering Task Force (IETF) has designed and standardized the IPv6
Routing Protocol for Low Power and Lossy Networks (RPL). This protocol, although being robust
and offering features to fulfill the need of several applications, still presents several faults and
weaknesses (mainly related to its high complexity and memory requirement), which limits its
adoption in IoT scenarios. An alternative to RPL, the Lightweight On-demand Ad Hoc Distancevector
Routing Protocol – Next Generation (LOADng) has emerged as a less complicated routing
solution for LLNs. However, the cost of its simplicity is paid for with the absence of adequate
support for a critical set of features required for many IoT environments. Thus, based on the
challenging open issues related to routing in IoT networks, this thesis aims to study and propose
contributions to better attend the network requirements of IoT scenarios. A comprehensive survey,
reviewing state-of-the-art routing protocols adopted for IoT, identified the strengths and
weaknesses of current solutions available in the literature. Based on the identified limitations,
a set of improvements is designed to overcome these issues and enhance IoT network performance.
The novel solutions are proposed to include reliable and efficient support to attend
the needs of IoT applications, such as mobility, heterogeneity, and different traffic patterns.
Moreover, mechanisms to improve the network performance in IoT scenarios, which integrate
devices with different communication technologies, are introduced.
The studies conducted to assess the performance of the proposed solutions showed
the high potential of the proposed solutions. When the approaches presented in this thesis
were compared with others available in the literature, they presented very promising results
considering the metrics related to the Quality of Service (QoS), network and energy efficiency,
and memory usage as well as adding new features to the base protocols. Hence, it is believed
that the proposed improvements contribute to the state-of-the-art of routing solutions for IoT
networks, increasing the performance and adoption of enhanced protocols.A Internet das Coisas, do inglês Internet of Things (IoT), propõe um paradigma de
comunicação disruptivo para possibilitar que dispositivos, que podem ser dotados de comportamentos
autónomos ou inteligentes, troquem dados entre eles buscando alcançar um objetivo
comum. Os cenários de aplicação do IoT são muito variados e podem abranger desde um simples
sistema de iluminação para casa até o controle total de uma linha de produção industrial. Na
maioria das instalações IoT, as “coisas” são equipadas com um pequeno dispositivo, responsável
por realizar as tarefas de comunicação e processamento de dados, que pode sofrer com severas
restrições de hardware e energia. Assim, devido às suas características, a rede de comunicação
criada por esses dispositivos é geralmente categorizada como uma Low Power and Lossy Network
(LLN).
A grande variedade de cenários IoT representam uma questão crucial para as LLNs,
que devem oferecer suporte aos diferentes requisitos das aplicações, além de manter níveis
de qualidade de serviço, do inglês Quality of Service (QoS), adequados. Baseado neste desafio,
os protocolos de encaminhamento constituem um aspecto chave na implementação de
cenários IoT. Os protocolos de encaminhamento são responsáveis por criar os caminhos entre
os dispositivos e permitir suas interações. Assim, o desempenho e as características da rede
são altamente dependentes do comportamento destes protocolos. Adicionalmente, com base
no protocolo adotado, o suporte a alguns requisitos específicos das aplicações de IoT podem
ou não ser fornecidos. Portanto, estes protocolos devem ser projetados para atender as necessidades
das aplicações assim como considerando as limitações do hardware no qual serão
executados.
Procurando atender às necessidades dos protocolos de encaminhamento em LLNs e,
consequentemente, das redes IoT, a Internet Engineering Task Force (IETF) desenvolveu e padronizou
o IPv6 Routing Protocol for Low Power and Lossy Networks (RPL). O protocolo, embora
seja robusto e ofereça recursos para atender às necessidades de diferentes aplicações, apresenta
algumas falhas e fraquezas (principalmente relacionadas com a sua alta complexidade e
necessidade de memória) que limitam sua adoção em cenários IoT. Em alternativa ao RPL, o
Lightweight On-demand Ad hoc Distance-vector Routing Protocol – Next Generation (LOADng)
emergiu como uma solução de encaminhamento menos complexa para as LLNs. Contudo, o
preço da simplicidade é pago com a falta de suporte adequado para um conjunto de recursos
essenciais necessários em muitos ambientes IoT. Assim, inspirado pelas desafiadoras questões
ainda em aberto relacionadas com o encaminhamento em redes IoT, esta tese tem como objetivo
estudar e propor contribuições para melhor atender os requisitos de rede em cenários IoT.
Uma profunda e abrangente revisão do estado da arte sobre os protocolos de encaminhamento
adotados em IoT identificou os pontos fortes e limitações das soluções atuais. Com base nas debilidades
encontradas, um conjunto de soluções de melhoria é proposto para superar carências
existentes e melhorar o desempenho das redes IoT. As novas soluções são propostas para incluir
um suporte confiável e eficiente capaz atender às necessidades das aplicações IoT relacionadas
com suporte à mobilidade, heterogeneidade dos dispositivos e diferentes padrões de tráfego.
Além disso, são introduzidos mecanismos para melhorar o desempenho da rede em cenários IoT
que integram dispositivos com diferentes tecnologias de comunicação.
Os vários estudos realizados para mensurar o desempenho das soluções propostas mostraram
o grande potencial do conjunto de melhorias introduzidas. Quando comparadas com
outras abordagens existentes na literatura, as soluções propostas nesta tese demonstraram um aumento do desempenho consistente para métricas relacionadas a qualidade de serviço, uso de
memória, eficiência energética e de rede, além de adicionar novas funcionalidades aos protocolos
base. Portanto, acredita-se que as melhorias propostas contribuiem para o avanço do estado
da arte em soluções de encaminhamento para redes IoT e aumentar a adoção e utilização dos
protocolos estudados
Ordering, timeliness and reliability for publish/subscribe systems over WAN
In the last few years, the increasing use of the Internet and geo-political, sociological and financial changes induced by globalization, are paving the way for a connected world where the information is always available at the right place and the right time. As such, applications previously deployed for ``closed'' environmets, are now federating into geographically distributed systems connected through a Wide Area Network (WAN). By this evolution, in the near future no system will be isolated: every system will be composed by interconnected systems, i.e., it will be a System of Systems (SoS). Example of SoS are the Large-scale Complex Critical Infrastructure (LCCIs), such as power grids, transport infrastructures (airports and seaports), financial infrastructures, next generation intelligence platforms, to cite a few. In these systems, multiple sources of information generate a high volume of events that need to be delivered to all intended destinations by respecting several Quality of Service (QoS) constraints imposed by the critical nature of LCCIs. As such, particular attention is devoted to the middleware solution used to disseminate information in the SoS. Due to its inherently scalability provided by space, time and synchronization decoupling properties, the publish/subscribe paradigm is becoming attractive for the implementation of a middleware service for LCCIs. However, scalability is not the only requirement exhibited by SoS. Several services need to control a broader set of QoS requirements, such as timeliness, ordering and reliability. Unfortunately, current middleware solutions do not address QoS constraints required by SoS. Current publish/subscribe middleware solutions for the WAN environment offer only a best effort event dissemination, with no additional control on QoS. Just a few implementations try to address some isolated QoS policy, making them not suitable for a SoS scenario. The contribution of this thesis is to devise a QoS layer that can be posed on top of a generic publish/subscribe middleware that enriches its service by addressing: (i) ordering, (ii) reliability and (iii) timeliness in event dissemination in SoS over WAN. Specifically, we first analyze several real case studies, by highlighting their QoS requirements in terms of ordering, reliability and timeliness, and compare these requirements with both current research prototypes and commercial systems. Then, we fill the gap by proposing novel algorithms to address those requirements. The proposed protocols can also be combined together in order to provide the QoS level required by the particular application. In this way, QoS issues do not need to be addressed at application level, so as to leave applications to implement just their native functionalities
- …