Advanced Strategies for Robot Manipulators

Amongst the robotic systems, robot manipulators have proven themselves to be of increasing importance and are widely adopted to substitute for human in repetitive and/or hazardous tasks. Modern manipulators are designed complicatedly and need to do more precise, crucial and critical tasks. So, the simple traditional control methods cannot be efficient, and advanced control strategies with considering special constraints are needed to establish. In spite of the fact that groundbreaking researches have been carried out in this realm until now, there are still many novel aspects which have to be explored

Image-Based Force Estimation and Haptic Rendering For Robot-Assisted Cardiovascular Intervention

Clinical studies have indicated that the loss of haptic perception is the prime limitation of robot-assisted cardiovascular intervention technology, hindering its global adoption. It causes compromised situational awareness for the surgeon during the intervention and may lead to health risks for the patients. This doctoral research was aimed at developing technology for addressing the limitation of the robot-assisted intervention technology in the provision of haptic feedback. The literature review showed that sensor-free force estimation (haptic cue) on endovascular devices, intuitive surgeon interface design, and haptic rendering within the surgeon interface were the major knowledge gaps. For sensor-free force estimation, first, an image-based force estimation methods based on inverse finite-element methods (iFEM) was developed and validated. Next, to address the limitation of the iFEM method in real-time performance, an inverse Cosserat rod model (iCORD) with a computationally efficient solution for endovascular devices was developed and validated. Afterward, the iCORD was adopted for analytical tip force estimation on steerable catheters. The experimental studies confirmed the accuracy and real-time performance of the iCORD for sensor-free force estimation. Afterward, a wearable drift-free rotation measurement device (MiCarp) was developed to facilitate the design of an intuitive surgeon interface by decoupling the rotation measurement from the insertion measurement. The validation studies showed that MiCarp had a superior performance for spatial rotation measurement compared to other modalities. In the end, a novel haptic feedback system based on smart magnetoelastic elastomers was developed, analytically modeled, and experimentally validated. The proposed haptics-enabled surgeon module had an unbounded workspace for interventional tasks and provided an intuitive interface. Experimental validation, at component and system levels, confirmed the usability of the proposed methods for robot-assisted intervention systems

Augmented Reality Navigation Interfaces Improve Human Performance In End-Effector Controlled Telerobotics

On the International Space Station (ISS) and space shuttles, the National Aeronautics and Space Administration (NASA) has used robotic manipulators extensively to perform payload handling and maintenance tasks. Teleoperating robots require expert skills and optimal performance is crucial to mission completion and crew safety. Degradation in performance is observed when manual control is mediated through remote camera views, resulting in poor end-effector navigation quality and extended task completion times. This thesis explores the application of three-dimensional augmented reality (AR) interfaces specifically designed to improve human performance during end-effector controlled teleoperations. A modular telerobotic test bed was developed for this purpose and several experiments were conducted. In the first experiment, the effect of camera placement on end-effector manipulation performance was evaluated. Results show that increasing misalignment between the displayed end-effector and hand-controller axes (display-control misalignments) increases the time required to process a movement input. Simple AR movement cues were found to mitigate the adverse effects of camera-based teleoperation and made performance invariant to misalignment. Applying these movement cues to payload transport tasks correspondingly demonstrated improvements in free-space navigation quality over conventional end-effector control using multiple cameras. Collision-free teleoperations are also a critical requirement in space. To help the operators guide robots safely, a novel method was evaluated. Navigation plans computed by a planning agent are presented to the operator sequentially through an AR interface. The plans in combination with the interface allow the operator to guide the end-effector through collision-free regions in the remote environment safely. Experimental results show significant benefits in control performance including reduced path deviation and travel distance. Overall, the results show that AR interfaces can improve performance during manual control of remote robots and have tremendous potential in current and future teleoperated space robotic systems; as well as in contemporary military and surgical applications

Technology 2002: The Third National Technology Transfer Conference and Exposition, volume 2

Proceedings from symposia of the Technology 2002 Conference and Exposition, December 1-3, 1992, Baltimore, MD. Volume 2 features 60 papers presented during 30 concurrent sessions

Technology 2004, Vol. 2

Proceedings from symposia of the Technology 2004 Conference, November 8-10, 1994, Washington, DC. Volume 2 features papers on computers and software, virtual reality simulation, environmental technology, video and imaging, medical technology and life sciences, robotics and artificial intelligence, and electronics

Fifth Conference on Artificial Intelligence for Space Applications

The Fifth Conference on Artificial Intelligence for Space Applications brings together diverse technical and scientific work in order to help those who employ AI methods in space applications to identify common goals and to address issues of general interest in the AI community. Topics include the following: automation for Space Station; intelligent control, testing, and fault diagnosis; robotics and vision; planning and scheduling; simulation, modeling, and tutoring; development tools and automatic programming; knowledge representation and acquisition; and knowledge base/data base integration

Optimization of Operation Sequencing in CAPP Using Hybrid Genetic Algorithm and Simulated Annealing Approach

In any CAPP system, one of the most important process planning functions is selection of the operations and corresponding machines in order to generate the optimal operation sequence. In this paper, the hybrid GA-SA algorithm is used to solve this combinatorial optimization NP (Non-deterministic Polynomial) problem. The network representation is adopted to describe operation and sequencing flexibility in process planning and the mathematical model for process planning is described with the objective of minimizing the production time. Experimental results show effectiveness of the hybrid algorithm that, in comparison with the GA and SA standalone algorithms, gives optimal operation sequence with lesser computational time and lesser number of iterations