Voltage Multistability and Pulse Emergency Control for Distribution System with Power Flow Reversal

High levels of penetration of distributed generation and aggressive reactive power compensation may result in the reversal of power flows in future distribution grids. The voltage stability of these operating conditions may be very different from the more traditional power consumption regime. This paper focused on demonstration of multistability phenomenon in radial distribution systems with reversed power flow, where multiple stable equilibria co-exist at the given set of parameters. The system may experience transitions between different equilibria after being subjected to disturbances such as short-term losses of distributed generation or transient faults. Convergence to an undesirable equilibrium places the system in an emergency or \textit{in extremis} state. Traditional emergency control schemes are not capable of restoring the system if it gets entrapped in one of the low voltage equilibria. Moreover, undervoltage load shedding may have a reverse action on the system and can induce voltage collapse. We propose a novel pulse emergency control strategy that restores the system to the normal state without any interruption of power delivery. The results are validated with dynamic simulations of IEEE $13$-bus feeder performed with SystemModeler software. The dynamic models can be also used for characterization of the solution branches via a novel approach so-called the admittance homotopy power flow method.Comment: 13 pages, 22 figures. IEEE Transactions on Smart Grid 2015, in pres

Active damping of a DC network with a constant power load: an adaptive passivity-based control approach

This paper proposes a nonlinear, adaptive controller to increase the stability margin of a direct-current (DC) small-scale electrical network containing a constant power load, whose value is unknown. Due to their negative incremental impedance, constant power loads are known to reduce the effective damping of a network, leading to voltage oscillations and even to network collapse. To tackle this problem, we consider the incorporation of a controlled DC-DC power converter between the feeder and the constant power load. The design of the control law for the converter is based on the use of standard Passivity-Based Control and Immersion and Invariance theories. The good performance of the controller is evaluated with numerical simulations.Postprint (author's final draft

Voltage Stabilization in Microgrids via Quadratic Droop Control

We consider the problem of voltage stability and reactive power balancing in islanded small-scale electrical networks outfitted with DC/AC inverters ("microgrids"). A droop-like voltage feedback controller is proposed which is quadratic in the local voltage magnitude, allowing for the application of circuit-theoretic analysis techniques to the closed-loop system. The operating points of the closed-loop microgrid are in exact correspondence with the solutions of a reduced power flow equation, and we provide explicit solutions and small-signal stability analyses under several static and dynamic load models. Controller optimality is characterized as follows: we show a one-to-one correspondence between the high-voltage equilibrium of the microgrid under quadratic droop control, and the solution of an optimization problem which minimizes a trade-off between reactive power dissipation and voltage deviations. Power sharing performance of the controller is characterized as a function of the controller gains, network topology, and parameters. Perhaps surprisingly, proportional sharing of the total load between inverters is achieved in the low-gain limit, independent of the circuit topology or reactances. All results hold for arbitrary grid topologies, with arbitrary numbers of inverters and loads. Numerical results confirm the robustness of the controller to unmodeled dynamics.Comment: 14 pages, 8 figure