Feasibility study of an Integrated Program for Aerospace vehicle Design (IPAD). Volume 2: The design process

The extent to which IPAD is to support the design process is identified. Case studies of representative aerospace products were developed as models to characterize the design process and to provide design requirements for the IPAD computing system

Feasibility study of an Integrated Program for Aerospace-vehicle Design (IPAD) system. Volume 2: Characterization of the IPAD system, phase 1, task 1

The aircraft design process is discussed along with the degree of participation of the various engineering disciplines considered in this feasibility study

Driving continuous improvement

The quality of improvement depends on the quality of leading and lagging performance indicators. For this reason, several tools, such as process mapping, cause and effect analysis and FMEA, need to be used in an integrated way with performance measurement models, such as balanced scorecard, integrated performance measurement system, performance prism and so on. However, in our experience, this alone is not quite enough due to the amount of effort required to monitor performance indicators at operational levels. The authors find that IT support is key to the successful implementation of performance measurement-driven continuous improvement schemes

Analyzing the Potential of Hybrid and Electric Off-Road Equipment in Reducing Carbon Emissions from Construction Industries

This report quantifies the likely impact recent improvements in emissions technology in the heavy construction equipment fleet will have on national and state-level carbon emissions from construction industries. Specific technologies examined in this report include hybrid and electric-powered off-road equipment. Innovation in the equipment manufacturing industry, and adoption of innovative technology by construction firms, is driven by a wide range of factors, some of which can be influenced by public policy. Therefore, this paper describes policies available to public decision makers at the local, state and national levels that impact equipment use and development decisions, including those that encourage the use of green equipment in government procurement, local level job site emissions regulations, and state and nationally mandated emissions standards, fuel taxes, and direct research subsidies

Manufacturing Processes Management with Usage of Simulation Tools

Simulace výrobních procesů pomáhá optimalizovat výrobu, logistiku a další systémy, díky čemuž dochází ke snižování nákladů a racionalizaci vnitropodnikových procesů. Využitím diskrétní simulace programu Witness Power with Ease se v diplomové práci optimalizuje logistický tok materiálu ve společnosti Hella Autotechnik, s.r.o. Práce přibližuje metody a jednotlivé fáze tvorby modelu včetně jeho validace a navrhuje vylepšení, díky kterému by mělo dojít ke snížení nákladů na dopravní služby o 24 400 Kč měsíčně.By optimizing the logistics, production and other systems the simulation can reduce costs and rationalise business processes. By use of discrete simulation in software Witness Power with Ease is in this diploma thesis optimised logistical flow of material in the company Hella Autotechnik, s.r.o. The thesis introduces methods and particular phases of creating the model including its validation. The proposal in the diploma work suggests the improvement to lower the costs for the transportation services by 24,400 CZK per month.

O&M Models for Ocean Energy Converters: Calibrating through Real Sea Data

Of the cost centres that combine to result in Levelised Cost of Energy (LCOE), O&M costs play a significant part. Several developers have calculated component costs, demonstrating how they can become commercially competitive with other forms of renewable energy. However, there are uncertainties relating to the O&M figures that can only be reduced through lessons learned at sea. This work presents an O&M model calibrated with data from real sea experience of a wave energy device deployed at the Biscay Marine energy Platform (BiMEP): the OPERA O&M Model. Two additional case studies, utilising two other O&M calculation methodologies, are presented for comparison with the OPERA O&M Model. The second case study assumes the inexistence of an O&M model, utilising a Simplified Approach. The third case study applies DTOcean’s (a design tool for ocean energy arrays) O&M module. The results illustrate the potential advantages of utilising real sea data for the calibration and development of an O&M model. The Simplified Approach was observed to overestimate LCOE when compared to the OPERA O&M Model. This work also shows that O&M models can be used for the definition of optimal maintenance plans to assist with OPEX reduction.The authors are grateful to the European commission for funding the OPERA and EnFAIT projects as part of the Horizon 2020 framework. The authors also thankful to Oceantec-Idom for providing feedback to OPERA model’s inputs. A special thanks to Shona Pennock and Donald Noble for their diligent proofreading of this paper

Economic Instruments and the Pollution Impact of the 2006-2010 Vietnam Socio-Economic Development Plan

The current study derives optimal growth paths for pollution emission charges, in order to control future water pollution emissions in the Vietnamese manufacturing sector. The study builds on a prior study, which estimated the manufacturing sector pollution impact of the 2006- 2010 SEDP development plan for Vietnam (Jensen et al.; 2008). The current study demonstrates that effective implementation and moderate expansion of optimal emission charges, under certain conditions, could have been used, as part of the 2006-2010 SEDP development plan, to control pollution emissions at 2005 levels. Moreover, such a scenario would have been accompanied by a moderate expansion in fiscal revenues and a relatively minor economy-wide efficiency loss. The current study, therefore, suggests that effective implementation and gradual expansion of pollution emission charges should be incorporated into future SEDP development plans, in order to control pollution emissions as development progresses in Vietnam.Vietnam, manufacturing, CGE

Supply chain decision making supported by an Open books policy

Based on a study of a buyer–seller relationship in the automotive industry, this article identifies 17 different decision-making processes where openly sharing cost data—a so-called open books policy—plays an important supporting role. These processes relate to supplier selection, various activities that occur prior to production, and the full-speed production stage of the exchange process. Overall, open books plays the greatest role in the pre-production stage, although it is found to support decision-making relating to supplier selection and decision-making during full-speed production to a greater extent than the literature recognizes