Structural health monitoring of offshore wind turbines: A review through the Statistical Pattern Recognition Paradigm

Offshore Wind has become the most profitable renewable energy source due to the remarkable development it has experienced in Europe over the last decade. In this paper, a review of Structural Health Monitoring Systems (SHMS) for offshore wind turbines (OWT) has been carried out considering the topic as a Statistical Pattern Recognition problem. Therefore, each one of the stages of this paradigm has been reviewed focusing on OWT application. These stages are: Operational Evaluation; Data Acquisition, Normalization and Cleansing; Feature Extraction and Information Condensation; and Statistical Model Development. It is expected that optimizing each stage, SHMS can contribute to the development of efficient Condition-Based Maintenance Strategies. Optimizing this strategy will help reduce labor costs of OWTs׳ inspection, avoid unnecessary maintenance, identify design weaknesses before failure, improve the availability of power production while preventing wind turbines׳ overloading, therefore, maximizing the investments׳ return. In the forthcoming years, a growing interest in SHM technologies for OWT is expected, enhancing the potential of offshore wind farm deployments further offshore. Increasing efficiency in operational management will contribute towards achieving UK׳s 2020 and 2050 targets, through ultimately reducing the Levelised Cost of Energy (LCOE)

Determination and evaluation of clinically efficient stopping criteria for the multiple auditory steady-state response technique

Background: Although the auditory steady-state response (ASSR) technique utilizes objective statistical detection algorithms to estimate behavioural hearing thresholds, the audiologist still has to decide when to terminate ASSR recordings introducing once more a certain degree of subjectivity. Aims: The present study aimed at establishing clinically efficient stopping criteria for a multiple 80-Hz ASSR system. Methods: In Experiment 1, data of 31 normal hearing subjects were analyzed off-line to propose stopping rules. Consequently, ASSR recordings will be stopped when (1) all 8 responses reach significance and significance can be maintained for 8 consecutive sweeps; (2) the mean noise levels were ≤ 4 nV (if at this “≤ 4-nV” criterion, p-values were between 0.05 and 0.1, measurements were extended only once by 8 sweeps); and (3) a maximum amount of 48 sweeps was attained. In Experiment 2, these stopping criteria were applied on 10 normal hearing and 10 hearing-impaired adults to asses the efficiency. Results: The application of these stopping rules resulted in ASSR threshold values that were comparable to other multiple-ASSR research with normal hearing and hearing-impaired adults. Furthermore, in 80% of the cases, ASSR thresholds could be obtained within a time-frame of 1 hour. Investigating the significant response-amplitudes of the hearing-impaired adults through cumulative curves indicated that probably a higher noise-stop criterion than “≤ 4 nV” can be used. Conclusions: The proposed stopping rules can be used in adults to determine accurate ASSR thresholds within an acceptable time-frame of about 1 hour. However, additional research with infants and adults with varying degrees and configurations of hearing loss is needed to optimize these criteria

The application of time encoded signals to automated machine condition classification using neural networks

This thesis considers the classification of physical states in a simplified gearbox using acoustical data and simple time domain signal shape characterisation techniques allied to a basic feedforward multi-layer perceptron neural network. A novel extension to the signal coding scheme (TES), involving the application of energy based shape descriptors, was developed. This sought specifically to improve the techniques suitability to the identification of mechanical states and was evaluated against the more traditional minima based TES descriptors. The application of learning based identification techniques offers potential advantages over more traditional programmed techniques both in terms of greater noise immunity and in the reduced requirement for highly skilled operators. The practical advantages accrued by using these networks are studied together with some of the problems associated in their use within safety critical monitoring systems.Practical trials were used as a means of developing the TES conversion mechanism and were used to evaluate the requirements of the neural networks being used to classify the data. These assessed the effects upon performance of the acquisition and digital signal processing phases as well as the subsequent training requirements of networks used for accurate condition classification. Both random data selection and more operator intensive performance based selection processes were evaluated for training. Some rudimentary studies were performed on the internal architectural configuration of the neural networks in order to quantify its influence on the classification process, specifically its effect upon fault resolution enhancement.The techniques have proved to be successful in separating several unique physical states without the necessity for complex state definitions to be identified in advance. Both the computational demands and the practical constraints arising from the use of these techniques fall within the bounds of a realisable system

Quantitative Assessment of Flame Stability Through Image Processing and Spectral Analysis

This paper experimentally investigates two generalized methods, i.e., a simple universal index and oscillation frequency, for the quantitative assessment of flame stability at fossil-fuel-fired furnaces. The index is proposed to assess the stability of flame in terms of its color, geometry, and luminance. It is designed by combining up to seven characteristic parameters extracted from flame images. The oscillation frequency is derived from the spectral analysis of flame radiation signals. The measurements involved in these two methods do not require prior knowledge about fuel property, burner type, and other operation conditions. They can therefore be easily applied to flame stability assessment without costly and complex adaption. Experiments were carried out on a 9-MW heavy-oil-fired combustion test rig over a wide range of combustion conditions including variations in swirl vane position of the tertiary air, swirl vane position of the secondary air, and the ratio of the primary air to the total air. The impact of these burner parameters on the stability of heavy oil flames is investigated by using the index and oscillation frequency proposed. The experimental results obtained demonstrate the effectiveness of the methods and the importance of maintaining a stable flame for reduced NOx emissions. It is envisaged that such methods can be easily transferred to existing flame closed-circuit television systems and flame failure detectors in power stations for flame stability monitoring

Project OASIS: The Design of a Signal Detector for the Search for Extraterrestrial Intelligence

An 8 million channel spectrum analyzer (MCSA) was designed the meet to meet the needs of a SETI program. The MCSA puts out a very large data base at very high rates. The development of a device which follows the MCSA, is presented

The analysis of airborne acoustics of S.A.W. using neural networks

The analysis of acoustic emissions for machine health monitoring has made rapid advances in the last five years due to a revival of interest in the application of Artificial Neural Networks (ANNs). Complex signal analysis, which has often thwarted conventional statistical methods and expert systems, is now more possible with the introduction of 'neural' based computing methods. Acoustic emissions from welding processes are well documented. In particular, it has been established that a manual welder is capable of making intrinsic decisions concerning electrode position based on process noise. The analysis of time / amplitude signals and Fast Fourier Transforms (I-I-1s), within salient frequency bandwidths of the weld acoustic, has yielded erratic, unpredictable and noise polluted data. Extracting a meaningful interpretation from this data is computationally intensive when utilising standard statistical methods and leads to data explosions, especially when an 'on-line' corrective control signal is required. An Artificial Neural Network is 'trained' on examples from acquired data and performs a robust signal recognition task rather than relying on a programmed set of data samples as in the case of an expert system. This technique enables the network to generalise and, as a consequence, allows the input data to be erratic, erroneous and even incomplete. This research defines the development of a hybrid system, utilising high speed date capture and 141-1' computation for the signal pre-processing and a 'self organising' network paradigm to establish weld stability and real time corrective control of the process parameters. The paper describes a successful application of a Neural Network hybrid system to determine weld stability in submerged arc welding (S.A.W) through the interpretation of airborne acoustics

Supervised and non-supervised AE data classification of nanomodified CFRP during DCB tests

Aim of the paper is to use acoustic emissions to study the effect of electrospun nylon 6,6 Nanofibrous mat on carbon-epoxy composites during Double Cantilever beam (DCB) tests. In order to recognize the effect of the nanofibres and to detect different damage mechanisms, k-means clustering of acoustic emission signals applied to rise time, count, energy, duration and amplitude of the events is used. Supervised neural network (NN) is then applied to verify clustered signals. Results showed that clustered acoustic emission signals are a reliable tool to detect different damage mechanisms; neural network showed the method has a 99% of accuracy