Structural Checking Tool Restructure and Matching Improvements

With the rising complexity and size of hardware designs, saving development time and cost by employing third-party intellectual property (IP) into various first-party designs has become a necessity. However, using third-party IPs introduces the risk of adding malicious behavior to the design, including hardware Trojans. Different from software Trojan detection, the detection of hardware Trojans in an efficient and cost-effective manner is an ongoing area of study and has significant complexities depending on the development stage where Trojan detection is leveraged. Therefore, this thesis research proposes improvements to various components of the soft IP analysis methodology utilized by the Structural Checking Tool. The Structural Checking Tool analyzes the register-transfer level (RTL) code of IPs to determine their functionalities and to detect and identify hardware Trojans inserted. The Structural Checking process entails parsing a design to yield a structural representation and assigning assets that encompass 12 different characteristics to the primary ports and internal signals. With coarse-grained asset reassignment based on external and internal signal connections, matching can be performed against trusted IPs to classify the functionality of an unknown soft IP. Further analysis is done using a Golden Reference Library (GRL) containing information about known Trojan-free and Trojan-infested designs and serves as a vital component for unknown soft IP comparison. Following functional identification, the unknown soft IP is run through a fine-grained reassignment strategy to ensure usage of up-to-date GRL assets, and then the matching process is used to determine whether said IP is Trojan-infested or Trojan-free. This necessitates a large GRL while maintaining a balance of computational resources and high accuracy to ensure effective matching

ENABLING IOT AUTHENTICATION, PRIVACY AND SECURITY VIA BLOCKCHAIN

Although low-power and Internet-connected gadgets and sensors are increasingly integrated into our lives, the optimal design of these systems remains an issue. In particular, authentication, privacy, security, and performance are critical success factors. Furthermore, with emerging research areas such as autonomous cars, advanced manufacturing, smart cities, and building, usage of the Internet of Things (IoT) devices is expected to skyrocket. A single compromised node can be turned into a malicious one that brings down whole systems or causes disasters in safety-critical applications. This dissertation addresses the critical problems of (i) device management, (ii) data management, and (iii) service management in IoT systems. In particular, we propose an integrated platform solution for IoT device authentication, data privacy, and service security via blockchain-based smart contracts. We ensure IoT device authentication by blockchain-based IC traceability system, from its fabrication to its end-of-life, allowing both the supplier and a potential customer to verify an IC’s provenance. Results show that our proposed consortium blockchain framework implementation in Hyperledger Fabric for IC traceability achieves a throughput of 35 transactions per second (tps). To corroborate the blockchain information, we authenticate the IC securely and uniquely with an embedded Physically Unclonable Function (PUF). For reliable Weak PUF-based authentication, our proposed accelerated aging technique reduces the cumulative burn-in cost by ∼ 56%. We also propose a blockchain-based solution to integrate the privacy of data generated from the IoT devices by giving users control of their privacy. The smart contract controlled trust-base ensures that the users have private access to their IoT devices and data. We then propose a remote configuration of IC features via smart contracts, where an IC can be programmed repeatedly and securely. This programmability will enable users to upgrade IC features or rent upgraded IC features for a fixed period after users have purchased the IC. We tailor the hardware to meet the blockchain performance. Our on-die hardware module design enforces the hardware configuration’s secure execution and uses only 2,844 slices in the Xilinx Zedboard Zynq Evaluation board. The blockchain framework facilitates decentralized IoT, where interacting devices are empowered to execute digital contracts autonomously

Multiple bit error correcting architectures over finite fields

This thesis proposes techniques to mitigate multiple bit errors in GF arithmetic circuits. As GF arithmetic circuits such as multipliers constitute the complex and important functional unit of a crypto-processor, making them fault tolerant will improve the reliability of circuits that are employed in safety applications and the errors may cause catastrophe if not mitigated. Firstly, a thorough literature review has been carried out. The merits of efficient schemes are carefully analyzed to study the space for improvement in error correction, area and power consumption. Proposed error correction schemes include bit parallel ones using optimized BCH codes that are useful in applications where power and area are not prime concerns. The scheme is also extended to dynamically correcting scheme to reduce decoder delay. Other method that suits low power and area applications such as RFIDs and smart cards using cross parity codes is also proposed. The experimental evaluation shows that the proposed techniques can mitigate single and multiple bit errors with wider error coverage compared to existing methods with lesser area and power consumption. The proposed scheme is used to mask the errors appearing at the output of the circuit irrespective of their cause. This thesis also investigates the error mitigation schemes in emerging technologies (QCA, CNTFET) to compare area, power and delay with existing CMOS equivalent. Though the proposed novel multiple error correcting techniques can not ensure 100% error mitigation, inclusion of these techniques to actual design can improve the reliability of the circuits or increase the difficulty in hacking crypto-devices. Proposed schemes can also be extended to non GF digital circuits

Threat Analysis, Countermeaures and Design Strategies for Secure Computation in Nanometer CMOS Regime

Advancements in CMOS technologies have led to an era of Internet Of Things (IOT), where the devices have the ability to communicate with each other apart from their computational power. As more and more sensitive data is processed by embedded devices, the trend towards lightweight and efficient cryptographic primitives has gained significant momentum. Achieving a perfect security in silicon is extremely difficult, as the traditional cryptographic implementations are vulnerable to various active and passive attacks. There is also a threat in the form of hardware Trojans inserted into the supply chain by the untrusted third-party manufacturers for economic incentives. Apart from the threats in various forms, some of the embedded security applications such as random number generators (RNGs) suffer from the impacts of process variations and noise in nanometer CMOS. Despite their disadvantages, the random and unique nature of process variations can be exploited for generating unique identifiers and can be of tremendous use in embedded security. In this dissertation, we explore techniques for precise fault-injection in cryptographic hardware based on voltage/temperature manipulation and hardware Trojan insertion. We demonstrate the effectiveness of these techniques by mounting fault attacks on state-of-the-art ciphers. Physically Unclonable Functions (PUFs) are novel cryptographic primitives for extracting secret keys from complex manufacturing variations in integrated circuits (ICs). We explore the vulnerabilities of some of the popular strong PUF architectures to modeling attacks using Machine Learning (ML) algorithms. The attacks use silicon data from a test chip manufactured in IBM 32nm silicon-on-insulator (SOI) technology. Attack results demonstrate that the majority of strong PUF architectures can be predicted to very high accuracies using limited training data. We also explore the techniques to exploit unreliable data from strong PUF architectures and effectively use them to improve the prediction accuracies of modeling attacks. Motivated by the vulnerabilities of existing PUF architectures, we present a novel modeling attack resistant PUF architecture based on non-linear computing elements. Post-silicon validation results are used to demonstrate the effectiveness of the non-linear PUF architecture against modeling and fault-injection attacks. Apart from the techniques to improve the security of PUF circuits, we also present novel solutions to improve the performance of PUF circuits from the perspectives of IC fabrication and system/protocol design. Finally, we present a statistical benchmark suite to evaluate PUFs in conceptualization phase and also to enable fine-grained security assessments for varying PUF parameters. Data compressibility analyses for validating the statistical benchmark suite are also presented

Remote dynamic partial reconfiguration: A threat to Internet-of-Things and embedded security applications

The advent of the Internet of Things has motivated the use of Field Programmable Gate Array (FPGA) devices with Dynamic Partial Reconfiguration (DPR) capabilities for dynamic non-invasive modifications to circuits implemented on the FPGA. In particular, the ability to perform DPR over the network is essential in the context of a growing number of Internet of Things (IoT)-based and embedded security applications. However, the use of remote DPR brings with it a number of security threats that could lead to potentially catastrophic consequences in practical scenarios. In this paper, we demonstrate four examples where the remote DPR capability of the FPGA may be exploited by an adversary to launch Hardware Trojan Horse (HTH) attacks on commonly used security applications. We substantiate the threat by demonstrating remotely-launched attacks on Xilinx FPGA-based hardware implementations of a cryptographic algorithm, a true random number generator, and two processor-based security applications - namely, a software implementation of a cryptographic algorithm and a cash dispensing scheme. The attacks are launched by on-the-fly transfer of malicious FPGA configuration bitstreams over an Ethernet connection to perform DPR and leak sensitive information. Finally, we comment on plausible countermeasures to prevent such attack

Remote dynamic partial reconfiguration: A threat to Internet-of-Things and embedded security applications

The advent of the Internet of Things has motivated the use of Field Programmable Gate Array (FPGA) devices with Dynamic Partial Reconfiguration (DPR) capabilities for dynamic non-invasive modifications to circuits implemented on the FPGA. In particular, the ability to perform DPR over the network is essential in the context of a growing number of Internet of Things (IoT)-based and embedded security applications. However, the use of remote DPR brings with it a number of security threats that could lead to potentially catastrophic consequences in practical scenarios. In this paper, we demonstrate four examples where the remote DPR capability of the FPGA may be exploited by an adversary to launch Hardware Trojan Horse (HTH) attacks on commonly used security applications. We substantiate the threat by demonstrating remotely-launched attacks on Xilinx FPGA-based hardware implementations of a cryptographic algorithm, a true random number generator, and two processor-based security applications - namely, a software implementation of a cryptographic algorithm and a cash dispensing scheme. The attacks are launched by on-the-fly transfer of malicious FPGA configuration bitstreams over an Ethernet connection to perform DPR and leak sensitive information. Finally, we comment on plausible countermeasures to prevent such attack

Mitigation of Hardware Trojan Attacks on Networks-on-Chip

The Integrated Circuit (IC) design flow follows a global business model. A global business means that the processes in the IC design flow could be outsourced, and consequently security threats have been introduced. Security threats on hardware include side channel analysis, reverse engineering, information leakage, counterfeit chips, and hardware Trojans (HTs).This work mainly focuses on HT attacks, which execute a malicious operation on the system when a trigger condition is met. Networks-on-Chip (NoCs) are a popular communications infrastructure for many-core systems, which have proved to be a more scalable option over the traditional bus interface. However, the high scalability and modularity provided by NoCs have introduced new vulnerabilities in the design, leading to hardware Trojans capable of causing several Denial of Service (DoS) attacks on the network. A 4x4 Mesh-topology NoC with a more robust router microarchitecture is presented with several innovations relative to the baseline. A collaborative dynamic permutation and flow unit (flit) integrity check method is proposed to thwart an attacker from maliciously modifying the flit content in the routers of a NoC. Our method complements other HT detection approaches for the NoC network interfaces. Moreover, we exploit the Physical Unclonable Function (PUF) structure and the traffic routing history to generate a unique key vector for each router to select one of the multiple permutation configurations. Simulation and Field Programmable Gate Array (FPGA) results are compared between the proposed NoC microarchitecture and four other existing solutions found in literature, and it was shown that the proposed method outperforms all of the existing security methods

Enhanced Hardware Security Using Charge-Based Emerging Device Technology

The emergence of hardware Trojans has largely reshaped the traditional view that the hardware layer can be blindly trusted. Hardware Trojans, which are often in the form of maliciously inserted circuitry, may impact the original design by data leakage or circuit malfunction. Hardware counterfeiting and IP piracy are another two serious issues costing the US economy more than $200 billion annually. A large amount of research and experimentation has been carried out on the design of these primitives based on the currently prevailing CMOS technology. However, the security provided by these primitives comes at the cost of large overheads mostly in terms of area and power consumption. The development of emerging technologies provides hardware security researchers with opportunities to utilize some of the otherwise unusable properties of emerging technologies in security applications. In this dissertation, we will include the security consideration in the overall performance measurements to fully compare the emerging devices with CMOS technology. The first approach is to leverage two emerging devices (Silicon NanoWire and Graphene SymFET) for hardware security applications. Experimental results indicate that emerging device based solutions can provide high level circuit protection with relatively lower performance overhead compared to conventional CMOS counterpart. The second topic is to construct an energy-efficient DPA-resilient block cipher with ultra low-power Tunnel FET. Current-mode logic is adopted as a circuit-level solution to countermeasure differential power analysis attack, which is mostly used in the cryptographic system. The third investigation targets on potential security vulnerability of foundry insider\u27s attack. Split manufacturing is adopted for the protection on radio-frequency (RF) circuit design