Reliable and High-Performance Hardware Architectures for the Advanced Encryption Standard/Galois Counter Mode

The high level of security and the fast hardware and software implementations of the Advanced Encryption Standard (AES) have made it the first choice for many critical applications. Since its acceptance as the adopted symmetric-key algorithm, the AES has been utilized in various security-constrained applications, many of which are power and resource constrained and require reliable and efficient hardware implementations. In this thesis, first, we investigate the AES algorithm from the concurrent fault detection point of view. We note that in addition to the efficiency requirements of the AES, it must be reliable against transient and permanent internal faults or malicious faults aiming at revealing the secret key. This reliability analysis and proposing efficient and effective fault detection schemes are essential because fault attacks have become a serious concern in cryptographic applications. Therefore, we propose, design, and implement various novel concurrent fault detection schemes for different AES hardware architectures. These include different structure-dependent and independent approaches for detecting single and multiple stuck-at faults using single and multi-bit signatures. The recently standardized authentication mode of the AES, i.e., Galois/Counter Mode (GCM), is also considered in this thesis. We propose efficient architectures for the AES-GCM algorithm. In this regard, we investigate the AES algorithm and we propose low-complexity and low-power hardware implementations for it, emphasizing on its nonlinear transformation, i.e., SubByes (S-boxes). We present new formulations for this transformation and through exhaustive hardware implementations, we show that the proposed architectures outperform their counterparts in terms of efficiency. Moreover, we present parallel, high-performance new schemes for the hardware implementations of the GCM to improve its throughput and reduce its latency. The performance of the proposed efficient architectures for the AES-GCM and their fault detection approaches are benchmarked using application-specific integrated circuit (ASIC) and field-programmable gate array (FPGA) hardware platforms. Our comparison results show that the proposed hardware architectures outperform their existing counterparts in terms of efficiency and fault detection capability

High Speed AES Algorithm to Detect Fault Injection Attacks and Implementation using FPGA

Information security is an essential issue in communication system. Advance Encryption Standard (AES) is utilized as a part of many embedded applications to give data security. Different counter measures are present in AES against fault injection attacks. Plain text and key of 128-bit is given as an input to the system and encryption and decryption operations are performed. Flag error shows the status of fault. Fault is produced randomly during encryption and decryption. For this reason, round transformation is broken into two sections and a pipeline stage is inserted in between. After fault detection one operation is performed that is redundancy check. Detected error or fault is corrected using redundancy check. The scheme is implemented using FPGA

Lightweight Architectures for Reliable and Fault Detection Simon and Speck Cryptographic Algorithms on FPGA

The widespread use of sensitive and constrained applications necessitates lightweight (lowpower and low-area) algorithms developed for constrained nano-devices. However, nearly all of such algorithms are optimized for platform-based performance and may not be useful for diverse and flexible applications. The National Security Agency (NSA) has proposed two relatively-recent families of lightweight ciphers, i.e., Simon and Speck, designed as efficient ciphers on both hardware and software platforms. This paper proposes concurrent error detection schemes to provide reliable architectures for these two families of lightweight block ciphers. The research work on analyzing the reliability of these algorithms and providing fault diagnosis approaches has not been undertaken to date to the best of our knowledge. The main aim of the proposed reliable architectures is to provide high error coverage while maintaining acceptable area and power consumption overheads. To achieve this, we propose a variant of recomputing with encoded operands. These low-complexity schemes are suited for lowresource applications such as sensitive, constrained implantable and wearable medical devices. We perform fault simulations for the proposed architectures by developing a fault model framework. The architectures are simulated and analyzed on recent field-programmable grate array (FPGA) platforms, and it is shown that the proposed schemes provide high error coverage. The proposed low-complexity concurrent error detection schemes are a step forward towards more reliable architectures for Simon and Speck algorithms in lightweight, secure applications

Reliable Hardware Architectures for Cyrtographic Block Ciphers LED and HIGHT

Cryptographic architectures provide different security properties to sensitive usage models. However, unless reliability of architectures is guaranteed, such security properties can be undermined through natural or malicious faults. In this thesis, two underlying block ciphers which can be used in authenticated encryption algorithms are considered, i.e., LED and HIGHT block ciphers. The former is of the Advanced Encryption Standard (AES) type and has been considered areaefficient, while the latter constitutes a Feistel network structure and is suitable for low-complexity and low-power embedded security applications. In this thesis, we propose efficient error detection architectures including variants of recomputing with encoded operands and signature-based schemes to detect both transient and permanent faults. Authenticated encryption is applied in cryptography to provide confidentiality, integrity, and authenticity simultaneously to the message sent in a communication channel. In this thesis, we show that the proposed schemes are applicable to the case study of Simple Lightweight CFB (SILC) for providing authenticated encryption with associated data (AEAD). The error simulations are performed using Xilinx ISE tool and the results are benchmarked for the Xilinx FPGA family Virtex- 7 to assess the reliability capability and efficiency of the proposed architectures

Education and Research Integration of Emerging Multidisciplinary Medical Devices Security

Traditional embedded systems such as secure smart cards and nano-sensor networks have been utilized in various usage models. Nevertheless, emerging secure deeply-embedded systems, e.g., implantable and wearable medical devices, have comparably larger “attack surface”. Specifically, with respect to medical devices, a security breach can be life-threatening (for which adopting traditional solutions might not be practical due to tight constraints of these often-battery-powered systems), and unlike traditional embedded systems, it is not only a matter of financial loss. Unfortunately, although emerging cryptographic engineering research mechanisms for such deeply-embedded systems have started solving this critical, vital problem, university education (at both graduate and undergraduate level) lags comparably. One of the pivotal reasons for such a lag is the multi-disciplinary nature of the emerging security bottlenecks. Based on the aforementioned motivation, in this work, at Rochester Institute of Technology, we present an effective research and education integration strategy to overcome this issue in one of the most critical deeply-embedded systems, i.e., medical devices. Moreover, we present the results of two years of implementation of the presented strategy at graduate-level through fault analysis attacks, a variant of side-channel attacks. We note that the authors also supervise an undergraduate student and the outcome of the presented work has been assessed for that student as well; however, the emphasis is on graduate-level integration. The results of the presented work show the success of the presented methodology while pinpointing the challenges encountered compared to traditional embedded system security research/teaching integration of medical devices security. We would like to emphasize that our integration approaches are general and scalable to other critical infrastructures as well

Multidisciplinary Approaches and Challenges in Integrating Emerging Medical Devices Security Research and Education

Traditional embedded systems such as secure smart cards and nano-sensor networks have been utilized in various usage models. Nevertheless, emerging secure deeply-embedded systems, e.g., implantable and wearable medical devices, have comparably larger “attack surface”. Specifically, with respect to medical devices, a security breach can be life-threatening (for which adopting traditional solutions might not be practical due to tight constraints of these often-battery-powered systems), and unlike traditional embedded systems, it is not only a matter of financial loss. Unfortunately, although emerging cryptographic engineering research mechanisms for such deeply-embedded systems have started solving this critical, vital problem, university education (at both graduate and undergraduate level) lags comparably. One of the pivotal reasons for such a lag is the multi-disciplinary nature of the emerging security bottlenecks. Based on the aforementioned motivation, in this work, at Rochester Institute of Technology, we present an effective research and education integration strategy to overcome this issue in one of the most critical deeply-embedded systems, i.e., medical devices. Moreover, we present the results of two years of implementation of the presented strategy at graduate-level through fault analysis attacks, a variant of side-channel attacks. We note that the authors also supervise an undergraduate student and the outcome of the presented work has been assessed for that student as well; however, the emphasis is on graduate-level integration. The results of the presented work show the success of the presented methodology while pinpointing the challenges encountered compared to traditional embedded system security research/teaching integration of medical devices security. We would like to emphasize that our integration approaches are general and scalable to other critical infrastructures as well

Sequential Circuit Design for Embedded Cryptographic Applications Resilient to Adversarial Faults

In the relatively young field of fault-tolerant cryptography, the main research effort has focused exclusively on the protection of the data path of cryptographic circuits. To date, however, we have not found any work that aims at protecting the control logic of these circuits against fault attacks, which thus remains the proverbial Achilles’ heel. Motivated by a hypothetical yet realistic fault analysis attack that, in principle, could be mounted against any modular exponentiation engine, even one with appropriate data path protection, we set out to close this remaining gap. In this paper, we present guidelines for the design of multifault-resilient sequential control logic based on standard Error-Detecting Codes (EDCs) with large minimum distance. We introduce a metric that measures the effectiveness of the error detection technique in terms of the effort the attacker has to make in relation to the area overhead spent in implementing the EDC. Our comparison shows that the proposed EDC-based technique provides superior performance when compared against regular N-modular redundancy techniques. Furthermore, our technique scales well and does not affect the critical path delay

Reliable Low-Latency and Low-Complexity Viterbi Architectures Benchmarked on ASIC and FPGA

The Viterbi algorithm is commonly applied in a number of sensitive usage models including decoding convolutional codes used in communications such as satellite communication, cellular relay, and wireless local area networks. Moreover, the algorithm has been applied to automatic speech recognition and storage devices. In this thesis, efficient error detection schemes for architectures based on low-latency, low-complexity Viterbi decoders are presented. The merit of the proposed schemes is that reliability requirements, overhead tolerance, and performance degradation limits are embedded in the structures and can be adapted accordingly. We also present three variants of recomputing with encoded operands and its modifications to detect both transient and permanent faults, coupled with signature-based schemes. The instrumented decoder architecture has been subjected to extensive error detection assessments through simulations, and application-specific integrated circuit (ASIC) [32nm library] and field-programmable gate array (FPGA) [Xilinx Virtex-6 family] implementations for benchmark. The proposed fine-grained approaches can be utilized based on reliability objectives and performance/implementation metrics degradation tolerance

Integrating emerging cryptographic engineering research and security education

Unlike traditional embedded systems such as secure smart cards, emerging secure deeply embedded systems, e.g., implantable and wearable medical devices, have larger “attack surface”. A security breach in such systems which are embedded deeply in human bodies or objects would be life-threatening, for which adopting traditional solutions might not be practical due to tight constraints of these often-battery-powered systems. Unfortunately, although emerging cryptographic engineering research mechanisms have started solving this critical problem, university education (at both graduate and undergraduate level) lags comparably. One of the pivotal reasons for such a lag is the multi-disciplinary nature of the emerging security bottlenecks (mathematics, engineering, science, and medicine, to name a few). Based on the aforementioned motivation, in this paper, we present an effective research and education integration strategy to overcome this issue at Rochester Institute of Technology. Moreover, we present the results of more than one year implementation of the presented strategy at graduate level through “side-channel analysis attacks” case studies. The results of the presented work show the success of the presented methodology while pinpointing the challenges encountered compared to traditional embedded system security research/teaching integration