Generative feature-based design-by-constraints as a means of integration within the manufacturing industry

The article examines the development of computer aids within manufacturing industry and proposes an alternative approach to the way we design and the designer's role within manufacturing. A feature-based generative design-by-constraints approach is applied, which requires the designer to specify solutions in terms of manufacturing data, which is captured by means of an interactive simulation of machining processes, in which the constraints of equipment, materials and tools are displayed to the designer. The effect of this approach on the integration of all areas within a manufacturing environment is explored, as is the simultaneous design nature of this approach

Numerical modelling and simulation in sheet metal forming

The application of numerical modelling and simulation in manufacturing technologies is looking back over about a 20–30 years history. In recent years, the role of modelling and simulation in engineering and in manufacturing industry has been continuously increasing. It is well known that during manufacturing processes simultaneous the effect of many different parameters can be observed. This is the reason why in former years, detailed analysis of manufacturing processes could have been done only by time-consuming and expensive trial-and-error methods. Due to the recent developments in the methods of modelling and simulation, as well as in computational facilities, modelling and simulation has become an everyday tool in engineering practice. Besides the aforementioned facts, the emerging role of modelling and simulation can also be explained by the growing globalisation and competition of the world market requiring shorter lead times and more cost effective solutions. In spite the enormous development of hardware and software facilities, the exclusive use of numerical modelling still seems to be very time- and cost consuming, and there is still often a high scepticism about the results among industrialists. Therefore, the purpose of this paper is to overview the present situation of numerical modelling and simulation in sheet metal forming, mainly from the viewpoint of scientific research and industrial applications

Recent Achievements in Numerical Simulation in Sheet Metal Forming Processes

Purpose of this paper: During the recent 10-15 years, Computer Aided Process Planning and Die Design evolved as one of the most important engineering tools in sheet metal forming, particularly in the automotive industry. This emerging role is strongly emphasized by the rapid development of Finite Element Modelling, as well. The purpose of this paper is to give a general overview about the recent achievements in this very important field of sheet metal forming and to introduce some special results in this development activity. Design/methodology/approach: Concerning the CAE activities in sheet metal forming, there are two main approaches: one of them may be regarded as knowledge based process planning, whilst the other as simulation based process planning. The author attempts to integrate these two separate developments in knowledge and simulation based approach by linking commercial CAD and FEM systems. Findings: Applying the above approach a more powerful and efficient process planning and die design solution can be achieved radically reducing the time and cost of product development cycle and improving product quality. Research limitations: Due to the different modelling approaches in CAD and FEM systems, the biggest challenge is to enhance the robustness of data exchange capabilities between various systems to provide an even more streamlined information flow. Practical implications: The proposed integrated solutions have great practical importance to improve the global competitiveness of sheet metal forming in the very important segment of industry. Originality/value: The concept described in this paper may have specific value both for process planning and die design engineers

Decision support for build-to-order supply chain management through multiobjective optimization

This is the post-print version of the final paper published in International Journal of Production Economics. The published article is available from the link below. Changes resulting from the publishing process, such as peer review, editing, corrections, structural formatting, and other quality control mechanisms may not be reflected in this document. Changes may have been made to this work since it was submitted for publication. Copyright @ 2010 Elsevier B.V.This paper aims to identify the gaps in decision-making support based on multiobjective optimization (MOO) for build-to-order supply chain management (BTO-SCM). To this end, it reviews the literature available on modelling build-to-order supply chains (BTO-SC) with the focus on adopting MOO techniques as a decision support tool. The literature has been classified based on the nature of the decisions in different part of the supply chain, and the key decision areas across a typical BTO-SC are discussed in detail. Available software packages suitable for supporting decision making in BTO supply chains are also identified and their related solutions are outlined. The gap between the modelling and optimization techniques developed in the literature and the decision support needed in practice are highlighted. Future research directions to better exploit the decision support capabilities of MOO are proposed. These include: reformulation of the extant optimization models with a MOO perspective, development of decision supports for interfaces not involving manufacturers, development of scenarios around service-based objectives, development of efficient solution tools, considering the interests of each supply chain party as a separate objective to account for fair treatment of their requirements, and applying the existing methodologies on real-life data sets.Brunel Research Initiative and Enterprise Fund (BRIEF

Principles of computer simulation design for the needs of improvement of the raw materials combined transport system

This article is focused on computer simulation design for raw materials transportation. The creation of a simulation model of the combined transport system for the raw materials transportation has its own problematic parts. In general, these are parts, which represent transport nodes, i.e. parts of the system in which raw materials are reloaded from one vehicle to another. The given operations are in practice dependent on the preparedness of all transportation means, which participate in it. To locate operations of reloading of the raw materials from one vehicle to another and the check of the preparedness of the vehicles of the reloading in the simulation system is more demanding because it is necessary to take into consideration several aspects, such as an existence of a vehicle with raw materials, an existence of a vehicle to which it is to be reloaded a suitable freeloader, and so on. The article focuses on defining a procedure and correct steps at the creation of the simulation computer model of the combined raw materials transport system in the EXTENDSIM simulation system based on specific data from a real transport system. As is clear from the proposed procedure of the creation of the combined raw material transport system, as a check element of the transport system preparedness, it is suitable to use the "Gate" block and its features in the EXTENDSIM simulation system. As transpires from the results of simulation of the combined raw material transport system, about 322,000 tons of raw materials at 90-96% with the use of all vehicles is transported during the year.Web of Science23217416

Decision support for build-to-order supply chain management through multiobjective optimization

This paper aims to identify the gaps in decision-making support based on multiobjective optimization for build-to-order supply chain management (BTOSCM). To this end, it reviews the literature available on modelling build-to-order supply chains (BTO-SC) with the focus on adopting multiobjective optimization (MOO) techniques as a decision support tool. The literature has been classified based on the nature of the decisions in different part of the supply chain, and the key decision areas across a typical BTO-SC are discussed in detail. Available software packages suitable for supporting decision making in BTO supply chains are also identified and their related solutions are outlined. The gap between the modelling and optimization techniques developed in the literature and the decision support needed in practice are highlighted and future research directions to better exploit the decision support capabilities of MOO are proposed

A review of data visualization: opportunities in manufacturing sequence management.

Data visualization now benefits from developments in technologies that offer innovative ways of presenting complex data. Potentially these have widespread application in communicating the complex information domains typical of manufacturing sequence management environments for global enterprises. In this paper the authors review the visualization functionalities, techniques and applications reported in literature, map these to manufacturing sequence information presentation requirements and identify the opportunities available and likely development paths. Current leading-edge practice in dynamic updating and communication with suppliers is not being exploited in manufacturing sequence management; it could provide significant benefits to manufacturing business. In the context of global manufacturing operations and broad-based user communities with differing needs served by common data sets, tool functionality is generally ahead of user application

Commercial-off-the-shelf simulation package interoperability: Issues and futures

Commercial-Off-The-Shelf Simulation Packages (CSPs) are widely used in industry to simulate discrete-event models. Interoperability of CSPs requires the use of distributed simulation techniques. Literature presents us with many examples of achieving CSP interoperability using bespoke solutions. However, for the wider adoption of CSP-based distributed simulation it is essential that, first and foremost, a standard for CSP interoperability be created, and secondly, these standards are adhered to by the CSP vendors. This advanced tutorial is on an emerging standard relating to CSP interoperability. It gives an overview of this standard and presents case studies that implement some of the proposed standards. Furthermore, interoperability is discussed in relation to large and complex models developed using CSPs that require large amount of computing resources. It is hoped that this tutorial will inform the simulation community of the issues associated with CSP interoperability, the importance of these standards and its future