Pouch Motors: Printable Soft Actuators Integrated with Computational Design

We propose pouch motors, a new family of printable soft actuators integrated with computational design. The pouch motor consists of one or more inflatable gas-tight bladders made of sheet materials. This printable actuator is designed and fabricated in a planar fashion. It allows both easy prototyping and mass fabrication of affordable robotic systems. We provide theoretical models of the actuators compared with the experimental data. The measured maximum stroke and tension of the linear pouch motor are up to 28% and 100 N, respectively. The measured maximum range of motion and torque of the angular pouch motor are up to 80° and 0.2 N, respectively. We also develop an algorithm that automatically generates the patterns of the pouches and their fluidic channels. A custom-built fabrication machine streamlines the automated process from design to fabrication. We demonstrate a computer-generated life-sized hand that can hold a foam ball and perform gestures with 12 pouch motors, which can be fabricated in 15 min.National Science Foundation (U.S.) (1240383)National Science Foundation (U.S.) (1138967)United States. Department of Defens

Soft Scalable Self-Reconfigurable Modular Cellbot

Hazardous environments such as disaster affected areas, outer space, and radiation affected areas are dangerous for humans. Autonomous systems which can navigate through these environments would reduce risk of life. The terrains in these applications are diverse and unknown, hence there is a requirement for a robot which can self-adapt its morphology and use suitable control to optimally move in the desired manner. Although there exist monolithic robots for some of these applications, such as the Curiosity rover for Mars exploration, a modular robot containing multiple simple units could increase the fault tolerance. A modular design also enables scaling up or down of the robot based on the current task, for example, scaling up by connecting multiple units to cover a wider area or scaling down to pass through a tight space.Taking bio-inspiration from cells, where – based on environmental conditions – cells come together to form different structures to carry out different tasks, a soft modular robot called Cellbot was developed which was composed of multiple units called ‘cells’. Tests were conducted to understand the cellbot movement over different frictional surfaces for different actuation functions, the number of cells connected in a line (1D), and the shapes formed by connecting cells in 2D. A simulation model was developed to test a large range of frictional values and actuation functions for different friction coefficients. Based on the obtained results, cells could be designed using a material with frictional properties lying in the optimal locomotion range. In other cases, where the application has diverse terrains, the number of connected units can be changed to optimise the robot locomotion. Initial tests were conducted using a ‘ball robot’, where the cellbot was designed using balls which touch ground to exploit friction and actuators to provide force to move the robot. The model was extended to develop, a ‘bellow robot’ which was fabricated using hyper-elastic bellows and employed pneumatic actuation. The amount of inflation of a cell and its neighbouring cells determined if the cell would touch the ground or be lifted up. This was used to change cell behaviour where a cell could be touching ground to provide anchoring friction, or lifted to push or pull the cells and thereby move the robot. The cells were connected by magnets which could be disconnected and reconnected by morphing the robot body. The cellbot can thus reconfigure by changing the number of connected units or its shape. The easy detachment can be used to remove and replace damaged cells. Complex cellbot movements can be achieved by either switching between different robot morphologies or by changing actuation control.Future cellbots will be controlled remotely to change their morphology, control, and number of connected cells, making them suitable for missions which require fault tolerance and autonomous shape adaptation. The proposed cellbot platform has the potential to reduce the energy, time and costs in comparison to traditional robots and has potential for applications such as exploration missions for outer space, search and rescue missions for disaster affected areas, internal medical procedures, and nuclear decommissioning.<br/

A novel type of compliant and underactuated robotic hand for dexterous grasping

Dieser Beitrag ist mit Zustimmung des Rechteinhabers aufgrund einer (DFG geförderten) Allianz- bzw. Nationallizenz frei zugänglich.This publication is with permission of the rights owner freely accessible due to an Alliance licence and a national licence (funded by the DFG, German Research Foundation) respectively.The usefulness and versatility of a robotic end-effector depends on the diversity of grasps it can accomplish and also on the complexity of the control methods required to achieve them. We believe that soft hands are able to provide diverse and robust grasping with low control complexity. They possess many mechanical degrees of freedom and are able to implement complex deformations. At the same time, due to the inherent compliance of soft materials, only very few of these mechanical degrees have to be controlled explicitly. Soft hands therefore may combine the best of both worlds. In this paper, we present RBO Hand 2, a highly compliant, underactuated, robust, and dexterous anthropomorphic hand. The hand is inexpensive to manufacture and the morphology can easily be adapted to specific applications. To enable efficient hand design, we derive and evaluate computational models for the mechanical properties of the hand's basic building blocks, called PneuFlex actuators. The versatility of RBO Hand 2 is evaluated by implementing the comprehensive Feix taxonomy of human grasps. The manipulator's capabilities and limits are demonstrated using the Kapandji test and grasping experiments with a variety of objects of varying weight. Furthermore, we demonstrate that the effective dimensionality of grasp postures exceeds the dimensionality of the actuation signals, illustrating that complex grasping behavior can be achieved with relatively simple control

A Novel, Bio-Inspired, Soft Robot for Water Pipe Inspection

abstract: This thesis presents the design and testing of a soft robotic device for water utility pipeline inspection. The preliminary findings of this new approach to conventional methods of pipe inspection demonstrate that a soft inflatable robot can successfully traverse the interior space of a range of diameter pipes using pneumatic and without the need to adjust rigid, mechanical components. The robot utilizes inflatable soft actuators with an adjustable radius which, when pressurized, can provide a radial force, effectively anchoring the device in place. Additional soft inflatable actuators translate forces along the center axis of the device which creates forward locomotion when used in conjunction with the radial actuation. Furthermore, a bio-inspired control algorithm for locomotion allows the robot to maneuver through a pipe by mimicking the peristaltic gait of an inchworm. This thesis provides an examination and evaluation of the structure and behavior of the inflatable actuators through computational modeling of the material and design, as well as the experimental data of the forces and displacements generated by the actuators. The theoretical results are contrasted with/against experimental data utilizing a physical prototype of the soft robot. The design is anticipated to enable compliant robots to conform to the space offered to them and overcome occlusions from accumulated solids found in pipes. The intent of the device is to be used for inspecting existing pipelines owned and operated by Salt River Project, a Phoenix-area water and electricity utility provider.Dissertation/ThesisMasters Thesis Engineering 201

Design of a pneumatic soft robotic actuator using model-based optimization

In this thesis, the design and optimization process of a novel soft intelligent modular pad (IntelliPad) for the purpose of pressure injury prevention is presented. The structure of the IntelliPad consists of multiple individual multi-chamber soft pneumatic-driven actuators that use pressurized air and vacuum. Each actuator is able to provide both vertical and horizontal motions that can be controlled independently. An analytical modeling approach using multiple cantilever beams and virtual springs connected in a closed formed structure was developed to analyze the mechanical performance of the actuator. The analytical approach was validated by a finite element analysis. For optimizing the actuator\u27s mechanical performance, firefly algorithm and deep reinforcement learning-based design optimization frameworks were developed with the purpose of maximizing the horizontal motion of the top surface of the actuators, while minimizing its corresponding effect on the vertical motion. Four optimized designs were fabricated. The actuators were tested and validated experimentally to demonstrate their required mechanical performance in order to regulate normal and shear stresses at the skin-pad interface for pressure injury prevention applications