Application of homogeneous observers with variable exponent to a mechatronic system

International audiencePreventive maintenance becomes nowadays more and more essential in many industrial applications. In fact, researchers are always looking for new techniques and analysis tools to monitor the dynamic behavior of their machines. In this context, firstly, we deal with the modeling of an electromechanical system which is accounted for by a hybrid model obtained by assembling the mechanical model of a gear element and the electrical model of an asynchronous motor. Secondly, we use Sliding Mode Observers to supervise the gear dynamic behavior. The observers parameters are suitably chosen to ensure rapid and accurate convergence between the real and the estimated system quantities. Finally, a comparative study between three simulations is presented in order to illustrate the observers performances and the influence of the mechanical dynamics on the electrical ones

Observability studies of a turbocharger systems

The use of diesel engine turbochargers is increasing today, as it represents an option that o ers high e ciency and low fuel consumption. To design the control system in order to reduce the level of exhaust emissions there is a need for information about all states that are not measurable. To this end, observers or virtual sensors are more frequently applied, achieving estimates of the system states from inputs and measured output. To propose an observer, the precise mathematical model of the air path diesel engine system is used. This is a nonlinear model of a third order which is analyzed in terms of observability. From the point of view of systems theory, certain conditions and the existence of a transformation of the system state, called di eomorphism, need to be evaluated. Observers have been designed based on di erent approaches: Extended Luenberger Observers, High Gain Observers, Sliding Modes Observers and Extended Kalman-Bucy Filters. They have been validated by simulation for the system under consideration in this work.Tesi

Data Assimilation for hyperbolic conservation laws. A Luenberger observer approach based on a kinetic description

Developing robust data assimilation methods for hyperbolic conservation laws is a challenging subject. Those PDEs indeed show no dissipation effects and the input of additional information in the model equations may introduce errors that propagate and create shocks. We propose a new approach based on the kinetic description of the conservation law. A kinetic equation is a first order partial differential equation in which the advection velocity is a free variable. In certain cases, it is possible to prove that the nonlinear conservation law is equivalent to a linear kinetic equation. Hence, data assimilation is carried out at the kinetic level, using a Luenberger observer also known as the nudging strategy in data assimilation. Assimilation then resumes to the handling of a BGK type equation. The advantage of this framework is that we deal with a single "linear" equation instead of a nonlinear system and it is easy to recover the macroscopic variables. The study is divided into several steps and essentially based on functional analysis techniques. First we prove the convergence of the model towards the data in case of complete observations in space and time. Second, we analyze the case of partial and noisy observations. To conclude, we validate our method with numerical results on Burgers equation and emphasize the advantages of this method with the more complex Saint-Venant system

Observer Design for Interconnected Systems and Implementation via Differential-Algebraic Equations

A new approach to the design of observers of nonlinear dynamical systems is presented. Generally, linear or nonlinear control systems are expressed as explicit systems of differential equations and solved either analytically or numerically. If numerically, they are implemented using standard ordinary differential equation (ODE) solvers. In this thesis, a system is decomposed and modeled as an interconnection between two observer subsystems, particularly, as canonical DAE observers. In general, control design engineers may be faced with a formidable problem of solving this system analytically or in obtaining closed-form solutions. To attest to the complexity and complications in treating a system of interconnected DAE observer systems, a scaled-down version of a publication on “Small-Gain Theorem” is included in the appendix for the reader’s perusal. (A brief introduction to “Small-Gain Theorem” can be found in Chapter 4). The premise of this thesis is to demonstrate that, where the design of an observer plays a major role involving output feedback, there may be advantages in formulating a control system as a differential-algebraic equation (DAE), especially in the case of interconnected subsystems. An implicit system of interconnected DAE observers is considered and shown implementable using an existing DAE solver, whose resolution allows one the capability of computing input and output bounds. This is based on fixed or variable timesteps within the operating interval of each subsystem to ensure input-output stability (IOS) and the observability property of the interconnected observer system. The observer design method is based on the extended linearization approach. The basic background is provided for the design process of an interconnected observer system using DAE. Note, the application of the new approach has not been considered previously for the case of an interconnected DAE observer system

Modeling and Estimation of Biological Plants

Estimating the state of a dynamic system is an essential task for achieving important objectives such as process monitoring, identification, and control. Unlike linear systems, no systematic method exists for the design of observers for nonlinear systems. Although many researchers have devoted their attention to these issues for more than 30 years, there are still many open questions. We envisage that estimation plays a crucial role in biology because of the possibility of creating new avenues for biological studies and for the development of diagnostic, management, and treatment tools. To this end, this thesis aims to address two types of nonlinear estimation techniques, namely, the high-gain observer and the moving-horizon estimator with application to three different biological plants. After recalling basic definitions of stability and observability of dynamical systems and giving a bird's-eye survey of the available state estimation techniques, we are interested in the high-gain observers. These observers may be used when the system dynamics can be expressed in specific a coordinate under the so-called observability canonical form with the possibility to assign the rate of convergence arbitrarily by acting on a single parameter called the high-gain parameter. Despite the evident benefits of this class of observers, their use in real applications is questionable due to some drawbacks: numerical problems, the peaking phenomenon, and high sensitivity to measurement noise. The first part of the thesis aims to enrich the theory of high-gain observers with novel techniques to overcome or attenuate these challenging performance issues that arise when implementing such observers. The validity and applicability of our proposed techniques have been shown firstly on a simple one-gene regulatory network, and secondly on an SI epidemic model. The second part of the thesis studies the problem of state estimation using the moving horizon approach. The main advantage of MHE is that information about the system can be explicitly considered in the form of constraints and hence improve the estimates. In this work, we focus on estimation for nonlinear plants that can be rewritten in the form of quasi-linear parameter-varying systems with bounded unknown parameters. Moving-horizon estimators are proposed to estimate the state of such systems according to two different formulations, i.e., "optimistic" and "pessimistic". In the former case, we perform estimation by minimizing the least-squares moving-horizon cost with respect to both state variables and parameters simultaneously. In the latter, we minimize such a cost with respect to the state variables after picking up the maximum of the parameters. Under suitable assumptions, the stability of the estimation error given by the exponential boundedness is proved in both scenarios. Finally, the validity of our obtained results has been demonstrated through three different examples from biological and biomedical fields, namely, an example of one gene regulatory network, a two-stage SI epidemic model, and Amnioserosa cell's mechanical behavior during Dorsal closure

Non-Linear Robust Observers For Systems With Non-Collocated Sensors And Actuators

Challenges in controlling highly nonlinear systems are not limited to the development of sophisticated control algorithms that are tolerant to significant modeling imprecision and external disturbances. Additional challenges stem from the implementation of the control algorithm such as the availability of the state variables needed for the computation of the control signals, and the adverse effects induced by non-collocated sensors and actuators. The present work investigates the adverse effects of non-collocated sensors and actuators on the phase characteristics of flexible structures and the ensuing implications on the performance of structural controllers. Two closed-loop systems are considered and their phase angle contours have been generated as functions of the normalized sensor location and the excitation frequency. These contours were instrumental in the development of remedial actions for rendering structural controllers immune to the detrimental effects of non-collocated sensors and actuators. Moreover, the current work has focused on providing experimental validation for the robust performances of a self-tuning observer and a sliding mode observer. The observers are designed based on the variable structure systems theory and the self-tuning fuzzy logic scheme. Their robustness and self-tuning characteristics allow one to use an imprecise model of the system and eliminate the need for the extensive tuning associated with a fixed rule-based expert fuzzy inference system. The first phase of the experimental work was conducted in a controlled environment on a flexible spherical robotic manipulator whose natural frequencies are configuration-dependent. Both controllers have yielded accurate estimates of the required state variables in spite of significant modeling imprecision. The observers were also tested under a completely uncontrolled environment, which involves a 16-ft boat operating in open-water under different sea states. Such an experimental work necessitates the development of a supervisory control algorithm to perform PTP tasks, prescribed throttle arm and steering tasks, surge speed and heading tracking tasks, or recovery maneuvers. This system has been implemented herein to perform prescribed throttle arm and steering control tasks based on estimated rather than measured state variables. These experiments served to validate the observers in a completely uncontrolled environment and proved their viability as reliable techniques for providing accurate estimates for the required state variables

Variable structure techniques in control system design

During the last twenty years, control theorists belonging almost exclusively to the USSR, have laid down the foundations of variable-structure systems (commonly abbreviated to vsS). As the name implies, such systems are allowed to change their structure through time in accordance with some preassigned algorithm. The theory has demonstrated that some significant advantages could be gained by adopting that approach in the, design of automatic control systems, amongst which are good transient responses and insensitivity to parametric variations and to external disturbances. The VS controller is slightly more complex than a fixed structure design based on standard methods such as state feedback or frequency response techniques, but is a great deal less complex than some adaptive designs. It also lends itself to a straightforward microcomputer implementation. While the theoretical aspect of VSS has been well explored, its general applicability to engineering problems is yet to be established. There are still unanswered questions as to the suitability of the method for practical systems, which invariably contain a certain amount of noise, uncertainties and nonlinearities. The work described in this thesis concentrates on that particular aspect and is, in brief, an investigation of VSS as an engineering design procedure. The theory of VSS is reviewed and the principles are then applied to a number of engineering examples. The performance of the systems are assessed from digital simulation runs, hybrid computation and the microcomputer control of a DC motor

Applications of equivalent representations of fractional- and integer-order linear time-invariant systems

Nicht-ganzzahlige - fraktionale - Ableitungsoperatoren beschreiben Prozesse mit Gedächtniseffekten, deshalb werden sie zur Modellierung verschiedenster Phänomene, z.B. viskoelastischen Verhaltens, genutzt. In der Regelungstechnik wird das Konzept vor allem wegen des erhöhten Freiheitsgrades im Frequenzbereich verwendet. Deshalb wurden in den vergangenen Dekaden neben einer Verallgemeinerung des PID-Reglers auch fortgeschrittenere Regelungskonzepte auf nicht-ganzzahlige Operatoren erweitert. Das Gedächtnis der nicht-ganzzahligen Ableitung ist zwar essentiell für die Modellbildung, hat jedoch Nachteile, wenn z.B. Zustände geschätzt oder Regler implementiert werden müssen: Das Gedächtnis führt zu einer langsamen, algebraischen Konvergenz der Transienten und da eine numerische Approximation ist speicherintensiv. Im Zentrum der Arbeit steht die Frage, mit welchen Maßnahmen sich das Konvergenzverhalten dieser nicht ganzzahligen Systeme beeinflussen lässt. Es wird vorgeschlagen, die Ordnung der nicht ganzzahligen Ableitung zu ändern. Zunächst werden Beobachter für verschiedene Klassen linearer zeitinvarianter Systeme entworfen. Die Entwurfsmethodik basiert dabei auf einer assoziierten Systemdarstellung, welche einen Differenzialoperator mit höherer Ordnung verwendet. Basierend auf dieser Systembeschreibung können Beobachter entworfen werden, welche das Gedächtnis besser mit einbeziehen und so schneller konvergieren. Anschließend werden ganzzahlige lineare zeitinvariante Systeme mit Hilfe nicht-ganzzahliger Operatoren dargestellt. Dies ermöglicht eine erhöhte Konvergenz im Zeitintervall direkt nach dem Anfangszeitpunkt auf Grund einer unbeschränkten ersten Ableitung. Die periodische Löschung des so eingeführten Gedächtnisses wird erzielt, indem die nicht ganzzahlige Dynamik periodisch zurückgesetzt wird. Damit wird der algebraischen Konvergenz entgegen gewirkt und exponentielle Stabilität erzielt. Der Reset reduziert den Speicherbedarf und induziert eine unterlagerte zeitdiskrete Dynamik. Diese bestimmt die Stabilität des hybriden nicht-ganzzahligen Systems und kann genutzt werden um den Frequenzgang für niedrige Frequenzen zu bestimmen. So lassen sich Beobachter und Regler für ganzzahlige System entwerfen. Im Rahmen des Reglerentwurfs können durch den Resets das Verhalten für niedrige und hohe Frequenzen in gewissen Grenzen getrennt voneinander entworfen werden.Non-integer, so-called fractional-order derivative operators allow to describe systems with infinite memory. Hence they are attractive to model various phenomena, e.g. viscoelastic deformation. In the field of control theory, both the higher degree of freedom in the frequency domain as well as the easy generalization of PID control have been the main motivation to extend various advanced control concepts to the fractional-order domain. The long term memory of these operators which helps to model real life phenomena, has, however, negative effects regarding the application as controllers or observers. Due to the infinite memory, the transients only decay algebraically and the implementation requires a lot of physical memory. The main focus of this thesis is the question of how to influence the convergence rates of these fractional-order systems by changing the type of convergence. The first part is concerned with the observer design for different classes of linear time-invariant fractional-order systems. We derive associated system representations with an increased order of differentiation. Based on these systems, the observers are designed to take the unknown memory into account and lead to higher convergence rates. The second part explores the representation of integer-order linear time-invariant systems in terms of fractional-order derivatives. The application of the fractional-order operator introduces an unbounded first-order derivative at the initial time. This accelerates the convergence for a short time interval. With periodic deletion of the memory - a reset of the fractional-order dynamics - the slow algebraic decay is avoided and exponential stability can be achieved despite the fractional-order terms. The periodic reset leads to a reduced implementation demand and also induces underlying discrete time dynamics which can be used to prove stability of the hybrid fractional-order system and to give an interpretation of the reset in the frequency domain for the low frequency signals. This concept of memory reset is applied to design an observer and improve fractional-order controllers for integer-order processes. For the controller design this gives us the possibility to design the high-frequency response independently from the behavior at lower frequencies within certain limits

Finite-time estimation for linear time-delay systems via homogeneous method

International audienceThis paper presents a finite-time observer for linear time-delay systems with commensurate delay. Unlike the existing observers in the literature which converge asymptotically, the proposed observer provides a finite-time estimation. This is realized by using the well-known homogeneous technique, and the results are also extended to investigate the estimation problem for linear time-delay systems with unknown inputs. Simulation results are presented in order to illustrate the feasibility of the proposed method