LUXOR: An FPGA Logic Cell Architecture for Efficient Compressor Tree Implementations

We propose two tiers of modifications to FPGA logic cell architecture to deliver a variety of performance and utilization benefits with only minor area overheads. In the irst tier, we augment existing commercial logic cell datapaths with a 6-input XOR gate in order to improve the expressiveness of each element, while maintaining backward compatibility. This new architecture is vendor-agnostic, and we refer to it as LUXOR. We also consider a secondary tier of vendor-speciic modifications to both Xilinx and Intel FPGAs, which we refer to as X-LUXOR+ and I-LUXOR+ respectively. We demonstrate that compressor tree synthesis using generalized parallel counters (GPCs) is further improved with the proposed modifications. Using both the Intel adaptive logic module and the Xilinx slice at the 65nm technology node for a comparative study, it is shown that the silicon area overhead is less than 0.5% for LUXOR and 5-6% for LUXOR+, while the delay increments are 1-6% and 3-9% respectively. We demonstrate that LUXOR can deliver an average reduction of 13-19% in logic utilization on micro-benchmarks from a variety of domains.BNN benchmarks benefit the most with an average reduction of 37-47% in logic utilization, which is due to the highly-efficient mapping of the XnorPopcount operation on our proposed LUXOR+ logic cells.Comment: In Proceedings of the 2020 ACM/SIGDA International Symposium on Field-Programmable Gate Arrays (FPGA'20), February 23-25, 2020, Seaside, CA, US

Optimizing Bit-Serial Matrix Multiplication for Reconfigurable Computing

Matrix-matrix multiplication is a key computational kernel for numerous applications in science and engineering, with ample parallelism and data locality that lends itself well to high-performance implementations. Many matrix multiplication-dependent applications can use reduced-precision integer or fixed-point representations to increase their performance and energy efficiency while still offering adequate quality of results. However, precision requirements may vary between different application phases or depend on input data, rendering constant-precision solutions ineffective. BISMO, a vectorized bit-serial matrix multiplication overlay for reconfigurable computing, previously utilized the excellent binary-operation performance of FPGAs to offer a matrix multiplication performance that scales with required precision and parallelism. We show how BISMO can be scaled up on Xilinx FPGAs using an arithmetic architecture that better utilizes 6-LUTs. The improved BISMO achieves a peak performance of 15.4 binary TOPS on the Ultra96 board with a Xilinx UltraScale+ MPSoC.Comment: Invited paper at ACM TRETS as extension of FPL'18 paper arXiv:1806.0886

REAL-TIME ADAPTIVE PULSE COMPRESSION ON RECONFIGURABLE, SYSTEM-ON-CHIP (SOC) PLATFORMS

New radar applications need to perform complex algorithms and process a large quantity of data to generate useful information for the users. This situation has motivated the search for better processing solutions that include low-power high-performance processors, efficient algorithms, and high-speed interfaces. In this work, hardware implementation of adaptive pulse compression algorithms for real-time transceiver optimization is presented, and is based on a System-on-Chip architecture for reconfigurable hardware devices. This study also evaluates the performance of dedicated coprocessors as hardware accelerator units to speed up and improve the computation of computing-intensive tasks such matrix multiplication and matrix inversion, which are essential units to solve the covariance matrix. The tradeoffs between latency and hardware utilization are also presented. Moreover, the system architecture takes advantage of the embedded processor, which is interconnected with the logic resources through high-performance buses, to perform floating-point operations, control the processing blocks, and communicate with an external PC through a customized software interface. The overall system functionality is demonstrated and tested for real-time operations using a Ku-band testbed together with a low-cost channel emulator for different types of waveforms

Arithmetic core generation using bit heaps

International audienceA bit heap is a data structure that holds the unevaluated sum of an arbitrary number of bits, each weighted by some power of two. Most advanced arithmetic cores can be viewed as involving one or several bit heaps. We claim here that this point of view leads to better global optimization at the algebraic level, at the circuit level, and in terms of software engineering. To demonstrate it, a generic software framework is introduced for the definition and optimization of bit heaps. This framework, targeting DSP-enabled FPGAs, is developed within the open-source FloPoCo arithmetic core generator. Its versatility is demonstrated on several examples: multipliers, complex multipliers, polynomials, and discrete cosine transform

Closing the Gap between FPGA and ASIC:Balancing Flexibility and Efficiency

Despite many advantages of Field-Programmable Gate Arrays (FPGAs), they fail to take over the IC design market from Application-Specific Integrated Circuits (ASICs) for high-volume and even medium-volume applications, as FPGAs come with significant cost in area, delay, and power consumption. There are two main reasons that FPGAs have huge efficiency gap with ASICs: (1) FPGAs are extremely flexible as they have fully programmable soft-logic blocks and routing networks, and (2) FPGAs have hard-logic blocks that are only usable by a subset of applications. In other words, current FPGAs have a heterogeneous structure comprised of the flexible soft-logic and the efficient hard-logic blocks that suffer from inefficiency and inflexibility, respectively. The inefficiency of the soft-logic is a challenge for any application that is mapped to FPGAs, and lack of flexibility in the hard-logic results in a waste of resources when an application cannot use the hard-logic. In this thesis, we approach the inefficiency problem of FPGAs by bridging the efficiency/flexibility gap of the hard- and soft-logic. The main goal of this thesis is to compromise on efficiency of the hard-logic for flexibility, on the one hand, and to compromise on flexibility of the soft-logic for efficiency, on the other hand. In other words, this thesis deals with two issues: (1) adding more generality to the hard-logic of FPGAs, and (2) improving the soft-logic by adapting it to the generic requirements of applications. In the first part of the thesis, we introduce new techniques that expand the functionality of FPGAs hard-logic. The hard-logic includes the dedicated resources that are tightly coupled with the soft-logic –i.e., adder circuitry and carry chains –as well as the stand-alone ones –i.e., DSP blocks. These specialized resources are intended to accelerate critical arithmetic operations that appear in the pre-synthesis representation of applications; we introduce mapping and architectural solutions, which enable both types of the hard-logic to support additional arithmetic operations. We first present a mapping technique that extends the application of FPGAs carry chains for carry-save arithmetic, and then to increase the generality of the hard-logic, we introduce novel architectures; using these architectures, more applications can take advantage of FPGAs hard-logic. In the second part of the thesis, we improve the efficiency of FPGAs soft-logic by exploiting the circuit patterns that emerge after logic synthesis, i.e., connection and logic patterns. Using these patterns, we design new soft-logic blocks that have less flexibility, but more efficiency than current ones. In this part, we first introduce logic chains, fixed connections that are integrated between the soft-logic blocks of FPGAs and are well-suited for long chains of logic that appear post-synthesis. Logic chains provide fast and low cost connectivity, increase the bandwidth of the logic blocks without changing their interface with the routing network, and improve the logic density of soft-logic blocks. In addition to logic chains and as a complementary contribution, we present a non-LUT soft-logic block that comprises simple and pre-connected cells. The structure of this logic block is inspired from the logic patterns that appear post-synthesis. This block has a complexity that is only linear in the number of inputs, it sports the potential for multiple independent outputs, and the delay is only logarithmic in the number of inputs. Although this new block is less flexible than a LUT, we show (1) that effective mapping algorithms exist, (2) that, due to their simplicity, poor utilization is less of an issue than with LUTs, and (3) that a few LUTs can still be used in extreme unfortunate cases. In summary, to bridge the gap between FPGAs and ASICs, we approach the problem from two complementary directions, which balance flexibility and efficiency of the logic blocks of FPGAs. However, we were able to explore a few design points in this thesis, and future work could focus on further exploration of the design space

Rethinking FPGA Architectures for Deep Neural Network applications

The prominence of machine learning-powered solutions instituted an unprecedented trend of integration into virtually all applications with a broad range of deployment constraints from tiny embedded systems to large-scale warehouse computing machines. While recent research confirms the edges of using contemporary FPGAs to deploy or accelerate machine learning applications, especially where the latency and energy consumption are strictly limited, their pre-machine learning optimised architectures remain a barrier to the overall efficiency and performance. Realizing this shortcoming, this thesis demonstrates an architectural study aiming at solutions that enable hidden potentials in the FPGA technology, primarily for machine learning algorithms. Particularly, it shows how slight alterations to the state-of-the-art architectures could significantly enhance the FPGAs toward becoming more machine learning-friendly while maintaining the near-promised performance for the rest of the applications. Eventually, it presents a novel systematic approach to deriving new block architectures guided by designing limitations and machine learning algorithm characteristics through benchmarking. First, through three modifications to Xilinx DSP48E2 blocks, an enhanced digital signal processing (DSP) block for important computations in embedded deep neural network (DNN) accelerators is described. Then, two tiers of modifications to FPGA logic cell architecture are explained that deliver a variety of performance and utilisation benefits with only minor area overheads. Eventually, with the goal of exploring this new design space in a methodical manner, a problem formulation involving computing nested loops over multiply-accumulate (MAC) operations is first proposed. A quantitative methodology for deriving efficient coarse-grained compute block architectures from benchmarks is then suggested together with a family of new embedded blocks, called MLBlocks

LUT Based Generalized Parallel Counters for State-of-art FPGAs

Generalized Parallel Counters (GPCs) are frequently used in constructing high speed compressor trees. Previous work has focused on achieving efficient mapping of GPCs on FPGAs by using a combination of general Look-up table (LUT) fabric and specialized fast carry chains. The resulting structures are purely combinational and cannot be efficiently pipelined to achieve the potential FPGA performance. In this paper, we take an alternate approach and try to eliminate the fast carry chain from the GPC structure. We present a heuristic that maps GPCs on FPGAS using only general LUT fabric. The resultant GPCs are then easily re-timed by placing registers at the fan-out nodes of each LUT. We have used our heuristic on various GPCs reported in prior work. Our heuristic successfully eliminates the carry chain from the GPC structure with the same LUT count in most of the cases. Experimental results using Xilinx Kintex-7 FPGAs show a considerable reduction in critical path and dynamic power dissipation with same area utilization in most of the cases

Resource Optimal Truncated Multipliers for FPGAs

International audienceThis proposal presents the resource optimal design of truncated multipliers targeting field programmable gate arrays (FPGAs). In contrast to application specific integrated circuits (ASICs), the design for FPGAs has some distinct design challenges due to many possibilities of computing the partial products using logic-based or DSP-based sub-multipliers. To tackle this, we extend a previously proposed tiling methodology which translates the multiplier design into a geometrical problem: the target multiplier is represented by a board that has to be covered by tiles representing the sub-multipliers. The tiling with the least resources can be found with integer linear programming (ILP). Our extension considers the error of possibly unoccupied positions of the board and determines the tiling with the least resources that respects the maximal allowed error bound. This error bound is chosen such that a faithfully rounded truncated multiplier is obtained. Compared to previous designs that use a fixed number of guard bits or optimize at the level of the dot diagrams, this allows a much better use of sub-multipliers resulting in significant area savings without sacrificing the timing

Resource Optimal Squarers for FPGAs

International audienceSquaring is an essential operation in computer arithmetic that can be considered as a special case of multiplication where several simplifications can be applied to reduce the complexity of the resulting circuit. However, the design of a squarer is not straightforward for modern FPGAs that provide embedded DSP blocks and look-up-tables (LUTs). This work proposes a flexible method to design resource optimal squarers, i.e., a squarer that uses a minimum number of LUTs for a userdefined number of DSP blocks. The method uses an integer linear programming (ILP) formulation based on a generalization of multiplier tiling. It is shown that the proposed squarer design method significantly improves the LUT utilization for a given number of DSPs over previous methods, while maintaining a similar critical path delay and latency