Performance Improvement for SAR Tomography Based on Local Plane Model

Multilook approaches have been applied in synthetic aperture radar (SAR) tomography (TomoSAR), for improving the density and regularity of persistent scatterers reconstructed from multipass SAR images in both rural and urban regions. Multilook operations assume that all scatterers in a given neighborhood are similar in height, thereby providing additional data for recovering the position and reflectivity of a single scatterer, so that a higher signal-to-noise ratio can be achieved. This is equivalent to assuming that scatterers belonging to a local neighborhood of range-azimuth cells are located on horizontal planes. The present article generalizes this approach by adopting the so-called local plane (LP) model for TomoSAR imaging in urban areas, accounting for local variations in the height of scatterers that are not negligible. Furthermore, an LP-generalized likelihood ratio test (LP-GLRT) algorithm is developed to implement the previous idea. Compared with the multilook generalized likelihood ratio test algorithm, LP-GLRT shows better performance in the case of urban structures and terrains in experiments based on both simulated data and TerraSAR-X images

A Deep Learning Approach for SAR Tomographic Imaging of Forested Areas

Synthetic aperture radar tomographic imaging reconstructs the three-dimensional reflectivity of a scene from a set of coherent acquisitions performed in an interferometric configuration. In forest areas, a large number of elements backscatter the radar signal within each resolution cell. To reconstruct the vertical reflectivity profile, state-of-the-art techniques perform a regularized inversion implemented in the form of iterative minimization algorithms. We show that light-weight neural networks can be trained to perform the tomographic inversion with a single feed-forward pass, leading to fast reconstructions that could better scale to the amount of data provided by the future BIOMASS mission. We train our encoder-decoder network using simulated data and validate our technique on real L-band and P-band data.Comment: Submitted to IEEE Geoscience and Remote Sensing Letters, January 202

Temporal Characteristics of Boreal Forest Radar Measurements

Radar observations of forests are sensitive to seasonal changes, meteorological variables and variations in soil and tree water content. These phenomena cause temporal variations in radar measurements, limiting the accuracy of tree height and biomass estimates using radar data. The temporal characteristics of radar measurements of forests, especially boreal forests, are not well understood. To fill this knowledge gap, a tower-based radar experiment was established for studying temporal variations in radar measurements of a boreal forest site in southern Sweden. The work in this thesis involves the design and implementation of the experiment and the analysis of data acquired. The instrument allowed radar signatures from the forest to be monitored over timescales ranging from less than a second to years. A purpose-built, 50 m high tower was equipped with 30 antennas for tomographic imaging at microwave frequencies of P-band (420-450 MHz), L-band (1240-1375 MHz) and C-band (5250-5570 MHz) for multiple polarisation combinations. Parallel measurements using a 20-port vector network analyser resulted in significantly shorter measurement times and better tomographic image quality than previous tower-based radars. A new method was developed for suppressing mutual antenna coupling without affecting the range resolution. Algorithms were developed for compensating for phase errors using an array radar and for correcting for pixel-variant impulse responses in tomographic images. Time series results showed large freeze/thaw backscatter variations due to freezing moisture in trees. P-band canopy backscatter variations of up to 10 dB occurred near instantaneously as the air temperature crossed 0⁰C, with ground backscatter responding over longer timescales. During nonfrozen conditions, the canopy backscatter was very stable with time. Evidence of backscatter variations due to tree water content were observed during hot summer periods only. A high vapour pressure deficit and strong winds increased the rate of transpiration fast enough to reduce the tree water content, which was visible as 0.5-2 dB backscatter drops during the day. Ground backscatter for cross-polarised observations increased during strong winds due to bending tree stems. Significant temporal decorrelation was only seen at P-band during freezing, thawing and strong winds. Suitable conditions for repeat-pass L-band interferometry were only seen during the summer. C-band temporal coherence was high over timescales of seconds and occasionally for several hours for night-time observations during the summer. Decorrelation coinciding with high transpiration rates was observed at L- and C-band, suggesting sensitivity to tree water dynamics.The observations from this experiment are important for understanding, modelling and mitigating temporal variations in radar observables in forest parameter estimation algorithms. The results also are also useful in the design of spaceborne synthetic aperture radar missions with interferometric and tomographic capabilities. The results motivate the implementation of single-pass interferometric synthetic aperture radars for forest applications at P-, L- and C-band

Covariance symmetries detection in PolInSAR data

In the last two decades, the use of synthetic aperture radar (SAR) for remote sensing purposes has significantly developed due to improvements in the quality and the availability of the images. Two powerful SAR techniques, namely, polarimetry and interferometry, have further increased the range of applications of the sensed data. Using polarimetry, geometrical properties and geophysical parameters, such as shape, roughness, texture, and moisture content, can be retrieved with considerable accuracy, while interferometric information may be used to extract vertical information with accuracy less than 1 cm. In this paper, the potential of using joint polarimetry and interferometry techniques in SAR data (PolInSAR) for the purpose of SAR image classification is investigated. To achieve this goal, we extend a covariance symmetry detection framework to the PolInSAR scenario. The proposed approach will be shown to be able to exploit the peculiar structures of the covariance matrices of PolInSAR images to discriminate structures within the image. Results using real-SAR data are presented to validate the effectiveness of the proposed approach

Elevation and Deformation Extraction from TomoSAR

3D SAR tomography (TomoSAR) and 4D SAR differential tomography (Diff-TomoSAR) exploit multi-baseline SAR data stacks to provide an essential innovation of SAR Interferometry for many applications, sensing complex scenes with multiple scatterers mapped into the same SAR pixel cell. However, these are still influenced by DEM uncertainty, temporal decorrelation, orbital, tropospheric and ionospheric phase distortion and height blurring. In this thesis, these techniques are explored. As part of this exploration, the systematic procedures for DEM generation, DEM quality assessment, DEM quality improvement and DEM applications are first studied. Besides, this thesis focuses on the whole cycle of systematic methods for 3D & 4D TomoSAR imaging for height and deformation retrieval, from the problem formation phase, through the development of methods to testing on real SAR data. After DEM generation introduction from spaceborne bistatic InSAR (TanDEM-X) and airborne photogrammetry (Bluesky), a new DEM co-registration method with line feature validation (river network line, ridgeline, valley line, crater boundary feature and so on) is developed and demonstrated to assist the study of a wide area DEM data quality. This DEM co-registration method aligns two DEMs irrespective of the linear distortion model, which improves the quality of DEM vertical comparison accuracy significantly and is suitable and helpful for DEM quality assessment. A systematic TomoSAR algorithm and method have been established, tested, analysed and demonstrated for various applications (urban buildings, bridges, dams) to achieve better 3D & 4D tomographic SAR imaging results. These include applying Cosmo-Skymed X band single-polarisation data over the Zipingpu dam, Dujiangyan, Sichuan, China, to map topography; and using ALOS L band data in the San Francisco Bay region to map urban building and bridge. A new ionospheric correction method based on the tile method employing IGS TEC data, a split-spectrum and an ionospheric model via least squares are developed to correct ionospheric distortion to improve the accuracy of 3D & 4D tomographic SAR imaging. Meanwhile, a pixel by pixel orbit baseline estimation method is developed to address the research gaps of baseline estimation for 3D & 4D spaceborne SAR tomography imaging. Moreover, a SAR tomography imaging algorithm and a differential tomography four-dimensional SAR imaging algorithm based on compressive sensing, SAR interferometry phase (InSAR) calibration reference to DEM with DEM error correction, a new phase error calibration and compensation algorithm, based on PS, SVD, PGA, weighted least squares and minimum entropy, are developed to obtain accurate 3D & 4D tomographic SAR imaging results. The new baseline estimation method and consequent TomoSAR processing results showed that an accurate baseline estimation is essential to build up the TomoSAR model. After baseline estimation, phase calibration experiments (via FFT and Capon method) indicate that a phase calibration step is indispensable for TomoSAR imaging, which eventually influences the inversion results. A super-resolution reconstruction CS based study demonstrates X band data with the CS method does not fit for forest reconstruction but works for reconstruction of large civil engineering structures such as dams and urban buildings. Meanwhile, the L band data with FFT, Capon and the CS method are shown to work for the reconstruction of large manmade structures (such as bridges) and urban buildings

LIDAR based semi-automatic pattern recognition within an archaeological landscape

LIDAR-Daten bieten einen neuartigen Ansatz zur Lokalisierung und Überwachung des kulturellen Erbes in der Landschaft, insbesondere in schwierig zu erreichenden Gebieten, wie im Wald, im unwegsamen Gelände oder in sehr abgelegenen Gebieten. Die manuelle Lokalisation und Kartierung von archäologischen Informationen einer Kulturlandschaft ist in der herkömmlichen Herangehensweise eine sehr zeitaufwändige Aufgabe des Fundstellenmanagements (Cultural Heritage Management). Um die Möglichkeiten in der Erkennung und bei der Verwaltung des kulturellem Erbes zu verbessern und zu ergänzen, können computergestützte Verfahren einige neue Lösungsansätze bieten, die darüber hinaus sogar die Identifizierung von für das menschliche Auge bei visueller Sichtung nicht erkennbaren Details ermöglichen. Aus archäologischer Sicht ist die vorliegende Dissertation dadurch motiviert, dass sie LIDAR-Geländemodelle mit archäologischen Befunden durch automatisierte und semiautomatisierte Methoden zur Identifizierung weiterer archäologischer Muster zu Bodendenkmalen als digitale „LIDAR-Landschaft“ bewertet. Dabei wird auf möglichst einfache und freie verfügbare algorithmische Ansätze (Open Source) aus der Bildmustererkennung und Computer Vision zur Segmentierung und Klassifizierung der LIDAR-Landschaften zur großflächigen Erkennung archäologischer Denkmäler zurückgegriffen. Die Dissertation gibt dabei einen umfassenden Überblick über die archäologische Nutzung und das Potential von LIDAR-Daten und definiert anhand qualitativer und quantitativer Ansätze den Entwicklungsstand der semiautomatisierten Erkennung archäologischer Strukturen im Rahmen archäologischer Prospektion und Fernerkundungen. Darüber hinaus erläutert sie Best Practice-Beispiele und den einhergehenden aktuellen Forschungsstand. Und sie veranschaulicht die Qualität der Erkennung von Bodendenkmälern durch die semiautomatisierte Segmentierung und Klassifizierung visualisierter LIDAR-Daten. Letztlich identifiziert sie das Feld für weitere Anwendungen, wobei durch eigene, algorithmische Template Matching-Verfahren großflächige Untersuchungen zum kulturellen Erbe ermöglicht werden. Resümierend vergleicht sie die analoge und computergestützte Bildmustererkennung zu Bodendenkmalen, und diskutiert abschließend das weitere Potential LIDAR-basierter Mustererkennung in archäologischen Kulturlandschaften