Compressive-sensing-based multiuser detector for the large-scale SM-MIMO uplink

Conventional spatial modulation (SM) is typically considered for transmission in the downlink of smallscale MIMO systems, where a single one of a set of say 2p antenna elements (AEs) is activated for implicitly conveying p bits. By contrast, inspired by the compelling benefits of large-scale MIMO (LS-MIMO) systems, here we propose a LS-SM-MIMO scheme for the uplink (UL), where each user having multiple AEs but only a single radio frequency (RF) chain invokes SM for increasing the UL-throughput. At the same time, by relying on hundreds of AEs but a small number of RF chains, the base station (BS) can simultaneously serve multiple users whilst reducing the power consumption. Due to the large number of AEs of the UL-users and the comparably small number of RF chains at the BS, the UL multi-user signal detection becomes a challenging large-scale under-determined problem. To solve this problem, we propose a joint SM transmission scheme and a carefully designed structured compressive sensing (SCS)-based multi-user detector (MUD) to be used at the users and BS, respectively. Additionally, the cyclic-prefix single-carrier (CPSC) is used to combat the multipath channels, and a simple receive AE selection is used for the improved performance over correlated Rayleigh-fading MIMO channels. We demonstrate that the aggregate SM signal consisting of multiple UL-users’ SM signals of a CPSC block appears the distributed sparsity. Moreover, due to the joint SM transmission scheme, aggregate SM signals in the same transmission group exhibit the group sparsity. By exploiting these intrinsically sparse features, the proposed SCS-based MUD can reliably detect the resultant SM signals with low complexity. Simulation results demonstrate that the proposed SCS-based MUD achieves a better signal detection performance than its counterparts even with higher UL-throughtput

Grant-Free Massive MTC-Enabled Massive MIMO: A Compressive Sensing Approach

A key challenge of massive MTC (mMTC), is the joint detection of device activity and decoding of data. The sparse characteristics of mMTC makes compressed sensing (CS) approaches a promising solution to the device detection problem. However, utilizing CS-based approaches for device detection along with channel estimation, and using the acquired estimates for coherent data transmission is suboptimal, especially when the goal is to convey only a few bits of data. First, we focus on the coherent transmission and demonstrate that it is possible to obtain more accurate channel state information by combining conventional estimators with CS-based techniques. Moreover, we illustrate that even simple power control techniques can enhance the device detection performance in mMTC setups. Second, we devise a new non-coherent transmission scheme for mMTC and specifically for grant-free random access. We design an algorithm that jointly detects device activity along with embedded information bits. The approach leverages elements from the approximate message passing (AMP) algorithm, and exploits the structured sparsity introduced by the non-coherent transmission scheme. Our analysis reveals that the proposed approach has superior performance compared to application of the original AMP approach.Comment: Submitted to IEEE Transactions on Communication

Compressive Sensing Based Massive Access for IoT Relying on Media Modulation Aided Machine Type Communications

A fundamental challenge of the large-scale Internet-of-Things lies in how to support massive machine-type communications (mMTC). This letter proposes a media modulation based mMTC solution for increasing the throughput, where a massive multi-input multi-output based base station (BS) is used for enhancing the detection performance. For such a mMTC scenario, the reliable active device detection and data decoding pose a serious challenge. By leveraging the sparsity of the uplink access signals of mMTC received at the BS, a compressive sensing based massive access solution is proposed for tackling this challenge. Specifically, we propose a block sparsity adaptive matching pursuit algorithm for detecting the active devices, whereby the block-sparsity of the uplink access signals exhibited across the successive time slots and the structured sparsity of media modulated symbols are exploited for enhancing the detection performance. Moreover, a successive interference cancellation based structured subspace pursuit algorithm is conceived for data demodulation of the active devices, whereby the structured sparsity of media modulation based symbols found in each time slot is exploited for improving the detection performance. Finally, our simulation results verify the superiority of the proposed scheme over state-of-the-art solutions.Comment: submitted to IEEE Transactions on Vehicular Technology [Major Revision

Compressive Sensing-Based Grant-Free Massive Access for 6G Massive Communication

The advent of the sixth-generation (6G) of wireless communications has given rise to the necessity to connect vast quantities of heterogeneous wireless devices, which requires advanced system capabilities far beyond existing network architectures. In particular, such massive communication has been recognized as a prime driver that can empower the 6G vision of future ubiquitous connectivity, supporting Internet of Human-Machine-Things for which massive access is critical. This paper surveys the most recent advances toward massive access in both academic and industry communities, focusing primarily on the promising compressive sensing-based grant-free massive access paradigm. We first specify the limitations of existing random access schemes and reveal that the practical implementation of massive communication relies on a dramatically different random access paradigm from the current ones mainly designed for human-centric communications. Then, a compressive sensing-based grant-free massive access roadmap is presented, where the evolutions from single-antenna to large-scale antenna array-based base stations, from single-station to cooperative massive multiple-input multiple-output systems, and from unsourced to sourced random access scenarios are detailed. Finally, we discuss the key challenges and open issues to shed light on the potential future research directions of grant-free massive access.Comment: Accepted by IEEE IoT Journa

A Compressive Sensing Assisted Massive SM-VBLAST System: Error Probability and Capacity Analysis

The concept of massive spatial modulation (SM) assisted vertical bell labs space-time (V-BLAST) (SM-VBLAST) system [1] is proposed, where SM symbols (instead of conventional constellation symbols) are mapped onto the VBLAST structure. We show that the proposed SM-VBLAST is a promising massive multiple input multiple output (MIMO) candidate owing to its high throughput and low number of radio frequency (RF) chains used at the transmitter. For the generalized massive SM-VBLAST systems, we first derive both the upper bounds of the average bit error probability (ABEP) and the lower bounds of the ergodic capacity. Then, we develop an efficient error correction mechanism (ECM) assisted compressive sensing (CS) detector whose performance tends to achieve that of the maximum likelihood (ML) detector. Our simulations indicate that the proposed ECM-CS detector is suitable both for massive SM-MIMO based point-to-point and for uplink communications at the cost of a slightly higher complexity than that of the compressive sampling matching pursuit (CoSaMP) based detector in the high SNR region

MmWave Massive MIMO Based Wireless Backhaul for 5G Ultra-Dense Network

Ultra-dense network (UDN) has been considered as a promising candidate for future 5G network to meet the explosive data demand. To realize UDN, a reliable, Gigahertz bandwidth, and cost-effective backhaul connecting ultra-dense small-cell base stations (BSs) and macro-cell BS is prerequisite. Millimeter-wave (mmWave) can provide the potential Gbps traffic for wireless backhaul. Moreover, mmWave can be easily integrated with massive MIMO for the improved link reliability. In this article, we discuss the feasibility of mmWave massive MIMO based wireless backhaul for 5G UDN, and the benefits and challenges are also addressed. Especially, we propose a digitally-controlled phase-shifter network (DPSN) based hybrid precoding/combining scheme for mmWave massive MIMO, whereby the low-rank property of mmWave massive MIMO channel matrix is leveraged to reduce the required cost and complexity of transceiver with a negligible performance loss. One key feature of the proposed scheme is that the macro-cell BS can simultaneously support multiple small-cell BSs with multiple streams for each smallcell BS, which is essentially different from conventional hybrid precoding/combining schemes typically limited to single-user MIMO with multiple streams or multi-user MIMO with single stream for each user. Based on the proposed scheme, we further explore the fundamental issues of developing mmWave massive MIMO for wireless backhaul, and the associated challenges, insight, and prospect to enable the mmWave massive MIMO based wireless backhaul for 5G UDN are discussed.Comment: This paper has been accepted by IEEE Wireless Communications Magazine. This paper is related to 5G, ultra-dense network (UDN), millimeter waves (mmWave) fronthaul/backhaul, massive MIMO, sparsity/low-rank property of mmWave massive MIMO channels, sparse channel estimation, compressive sensing (CS), hybrid digital/analog precoding/combining, and hybrid beamforming. http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=730653

Massive Access in Media Modulation Based Massive Machine-Type Communications

The massive machine-type communications (mMTC) paradigm based on media modulation in conjunction with massive MIMO base stations (BSs) is emerging as a viable solution to support the massive connectivity for the future Internet-of-Things, in which the inherent massive access at the BSs poses significant challenges for device activity and data detection (DADD). This paper considers the DADD problem for both uncoded and coded media modulation based mMTC with a slotted access frame structure, where the device activity remains unchanged within one frame. Specifically, due to the slotted access frame structure and the adopted media modulated symbols, the access signals exhibit a doubly structured sparsity in both the time domain and the modulation domain. Inspired by this, a doubly structured approximate message passing (DS-AMP) algorithm is proposed for reliable DADD in the uncoded case. Also, we derive the state evolution of the DS-AMP algorithm to theoretically characterize its performance. As for the coded case, we develop a bit-interleaved coded media modulation scheme and propose an iterative DS-AMP (IDS-AMP) algorithm based on successive inference cancellation (SIC), where the signal components associated with the detected active devices are successively subtracted to improve the data decoding performance. In addition, the channel estimation problem for media modulation based mMTC is discussed and an efficient data-aided channel state information (CSI) update strategy is developed to reduce the training overhead in block fading channels. Finally, simulation results and computational complexity analysis verify the superiority of the proposed algorithms in both uncoded and coded cases. Also, our results verify the validity of the proposed data-aided CSI update strategy.Comment: Accepted by IEEE Transactions on Wireless Communications. The codes and some other materials about this work may be available at https://gaozhen16.github.i