Compressive Sampling based Multiple Symbol Differential Detection for UWB Communications

Compressive sampling (CS) based multiple sym- bol differential detectors are proposed for impulse-radio ultra- wideband signaling, using the principles of generalized likelihood ratio tests. The CS based detectors correspond to two communica- tion scenarios. One, where the signaling is fully synchronized at the receiver and the other, where there exists a symbol level synchro- nization only. With the help of CS, the sampling rates are reduced much below the Nyquist rate to save on the high power consumed by the analog-to-digital converters. In stark contrast to the usual compressive sampling practices, the proposed detectors work on the compressed samples directly, thereby avoiding a complicated reconstruction step and resulting in a reduction of the implemen- tation complexity. To resolve the detection of multiple symbols, compressed sphere decoders are proposed as well, for both com- munication scenarios, which can further help to reduce the sys- tem complexity. Differential detection directly on the compressed symbols is generally marred by the requirement of an identical measurement process for every received symbol. Our proposed detectors are valid for scenarios where the measurement process is the same as well as where it is different for each received symbol

Narrow Band Interference Elimination based on Compressed Sensing in UWB Energy Detector

Wireless communication applications with large signal bandwidth are developed tremendously in recent times. Due to large bandwidth the wide band communication causes huge power consumption and signal deterioration after addition of narrow band interference (NBI). The ultra wide band (UWB) energy detector, which is highly robust against NBI signal is presented. Compressed sensing is implemented to reduce the power consumption at the analog to digital converter with approximated message passing reconstruction. In addition to this, digital notch is employed to eliminate the NBI affected measurements from compressed version of the received signal before applying it to the energy detector. To analyze the efficiency of the detector, the energy detection and bit error probability of the detector in the absence of NBI and after mitigating NBI is compared. The simulation results are the evidence of effectiveness of the presented energy detector.

Compressive sampling based differential detection for UWB impulse radio signals

Noncoherent detectors significantly contribute to the practical realization of the ultra-wideband (UWB) impulse-radio (IR) concept, in that they allow avoiding channel estimation and provide highly efficient reception capabilities. Complexity can be reduced even further by resorting to an all-digital implementation, but Nyquist-rate sampling of the received signal is still required. The current paper addresses this issue by proposing a novel differential detection (DD) scheme, which exploits the compressive sampling (CS) framework to reduce the sampling rate much below the Nyquist-rate. The optimization problem is formulated to jointly recover the sparse received signal as well as the differentially encoded data symbols, and is compared with both the separate approach and the scheme using the compressed received signal directly, i.e., without reconstruction. Finally, a maximum a posteriori based detector using the compressed symbols is developed for a Laplacian distributed channel, as a reference to compare the performance of the proposed approaches. Simulation results show that the proposed joint CS-based DD brings the considerable advantage of reducing the sampling rate without degrading the performance, compared with the optimal MAP detector

Ultra-Wideband Relay Communication Systems

Impulse-radio ultra-wide-band (IR-UWB) signaling is a promising technique for high-speed, short-range relay communications networks. Depending on how the relay node retransmits the signal, there are two main relay schemes: conventional one-directional (one-way) relay model, and bi-directional (two-way) relay model. In bi-directional relay communications, wireless network coding (WNC), also called physical-layer network coding (PNC), could be applied to overcome the spectral efficiency limitation of the conventional one-way relay. In the first part of this work, we propose asynchronous, differential, and bidirectional decode and forward (ADBDF) and asynchronous, differential, and bidirectional denoise and forward (ADBDNF) UWB relay methods, where the relay node (RN) does not need to be synchronized with the end nodes (ENs). The proposed schemes are attractive for networks in which stringent/complicated synchronization between the RN and the ENs may not be feasible. The second part of this work focuses on UWB channel classification. We propose a 2-dimensional (2-D) LOS/NLOS classification scheme that uses skewness of the channel impulse/pulse response. The proposed channel classification decreases the complexity of existing channel classification methods and can be used in a variety of areas such as localization, relay communications, and cooperative communications. The final part of this work deals with compressive sensing (CS) algorithms that employ sub-Nyquist sampling for UWB communications. We develop coarse graining (CG) for the proposed CS sub-Nyquist sampling technique, which leads to: (1) reduced sampling rate at the receiver, and hence reduced use of analog-to-digital converters (ADCs) resources; and (2) low-complexity channel estimation

Generalized Code-Multiplexing for UWB Communications

Code-multiplexed transmitted reference (CM-TR) and code-shifted reference (CSR) have recently drawn attention in the field of ultra-wideband communications mainly because they enable noncoherent detection without requiring either a delay component, as in transmitted reference, or an analog car- rier, as in frequency-shifted reference, to separate the reference and data-modulated signals at the receiver. In this paper, we propose a generalized code-multiplexing (GCM) system based on the formulation of a constrained mixed-integer optimization problem. The GCM extends the concept of CM-TR and CSR while retaining their simple receiver structure, even offering better bit-error-rate performance and a higher data rate in the sense that more data symbols can be embedded in each transmitted block. The GCM framework is further extended to the cases when peak power constraint is considered and when inter-frame interference exists, as typically occurs in high data-rate transmissions. Numerical simulations performed over demanding wireless environments corroborate the effectiveness of the proposed approach

Passive Synthetic Aperture Radar Imaging Using Commercial OFDM Communication Networks

Modern communication systems provide myriad opportunities for passive radar applications. OFDM is a popular waveform used widely in wireless communication networks today. Understanding the structure of these networks becomes critical in future passive radar systems design and concept development. This research develops collection and signal processing models to produce passive SAR ground images using OFDM communication networks. The OFDM-based WiMAX network is selected as a relevant example and is evaluated as a viable source for radar ground imaging. The monostatic and bistatic phase history models for OFDM are derived and validated with experimental single dimensional data. An airborne passive collection model is defined and signal processing approaches are proposed providing practical solutions to passive SAR imaging scenarios. Finally, experimental SAR images using general OFDM and WiMAX waveforms are shown to validate the overarching signal processing concept

Performance Analysis and Optimization of Tc-DTR IR-UWB Receivers over Multipath Fading Channels with Tone Interference

International audienceIn this paper, we analyze the performance of a particular class of transmitted-reference receivers for impulse radio ultra wideband communication systems, which is called chip-time differential transmitted-reference (Tc-DTR). The analysis aims at investigating the robustness of this receiver to single-tone and multi-tone narrowband interference (NBI) and comparing its performance with other non-coherent receivers that are proposed in the literature. It is shown that the Tc-DTR scheme provides more degrees of freedom for performance optimization and that it is inherently more robust to NBI than other non-coherent receivers. More specifically, it is analytically proved that the performance improvement is due to the chip-time-level differential encoding/decoding of the direct sequence (DS) code and to an adequate design of DS code and average pulse repetition time. The analysis encompasses performance metrics that are useful for both data detection (i.e., average bit error probability) and timing acquisition (i.e., false-alarm probability Pfa and detection probability Pd). Moving from the proposed sem-analytical framework, the optimal code design and system parameters are derived, and it is highlighted that the same optimization criteria can be applied to all the performance metrics considered in this paper. In addition, analytical frameworks and theoretical findings are substantiated through Monte Carlo simulations