High quality testing of grid style power gating

This paper shows that existing delay-based testing techniques for power gating exhibit fault coverage loss due to unconsidered delays introduced by the structure of the virtual voltage power-distribution-network (VPDN). To restore this loss, which could reach up to 70.3% on stuck-open faults, we propose a design-for-testability (DFT) logic that considers the impact of VPDN on fault coverage in order to constitute the proper interface between the VPDN and the DFT. The proposed logic can be easily implemented on-top of existing DFT solutions and its overhead is optimized by an algorithm that offers trade-off flexibility between test-application-time and hardware overhead. Through physical layout SPICE simulations, we show complete fault coverage recovery on stuck-open faults and 43.2% test-application-time improvement compared to a previously proposed DFT technique. To the best of our knowledge, this paper presents the first analysis of the VPDN impact on test qualit

A survey of scan-capture power reduction techniques

With the advent of sub-nanometer geometries, integrated circuits (ICs) are required to be checked for newer defects. While scan-based architectures help detect these defects using newer fault models, test data inflation happens, increasing test time and test cost. An automatic test pattern generator (ATPG) exercise’s multiple fault sites simultaneously to reduce test data which causes elevated switching activity during the capture cycle. The switching activity results in an IR drop exceeding the devices under test (DUT) specification. An increase in IR-drop leads to failure of the patterns and may cause good DUTs to fail the test. The problem is severe during at-speed scan testing, which uses a functional rated clock with a high frequency for the capture operation. Researchers have proposed several techniques to reduce capture power. They used various methods, including the reduction of switching activity. This paper reviews the recently proposed techniques. The principle, algorithm, and architecture used in them are discussed, along with key advantages and limitations. In addition, it provides a classification of the techniques based on the method used and its application. The goal is to present a survey of the techniques and prepare a platform for future development in capture power reduction during scan testing

CTX: A Clock-Gating-Based Test Relaxation and X-Filling Scheme for Reducing Yield Loss Risk in At-Speed Scan Testing

At-speed scan testing is susceptible to yield loss risk due to power supply noise caused by excessive launch switching activity. This paper proposes a novel two-stage scheme, namely CTX (Clock-Gating-Based Test Relaxation and X-Filling), for reducing switching activity when test stimulus is launched. Test relaxation and X-filling are conducted (1) to make as many FFs inactive as possible by disabling corresponding clock-control signals of clock-gating circuitry in Stage-1 (Clock-Disabling), and (2) to make as many remaining active FFs as possible to have equal input and output values in Stage-2 (FF-Silencing). CTX effectively reduces launch switching activity, thus yield loss risk, even with a small number of donpsilat care (X) bits as in test compression, without any impact on test data volume, fault coverage, performance, and circuit design.2008 17th Asian Test Symposium (ATS 2008), 24-27 November 2008, Sapporo, Japa

Optimizing Test Pattern Generation Using Top-Off ATPG Methodology for Stuck–AT, Transition and Small Delay Defect Faults

The ever increasing complexity and size of digital circuits complemented by Deep Sub Micron (DSM) technology trends today pose challenges to the efficient Design For Test (DFT) methodologies. Innovation is required not only in designing the digital circuits, but also in automatic test pattern generation (ATPG) to ensure that the pattern set screens all the targeted faults while still complying with the Automatic Test Equipment (ATE) memory constraints. DSM technology trends push the requirements of ATPG to not only include the conventional static defects but also to include test patterns for dynamic defects. The current industry practices consider test pattern generation for transition faults to screen dynamic defects. It has been observed that just screening for transition faults alone is not sufficient in light of the continuing DSM technology trends. Shrinking technology nodes have pushed DFT engineers to include Small Delay Defect (SDD) test patterns in the production flow. The current industry standard ATPG tools are evolving and SDD ATPG is not the most economical option in terms of both test generation CPU time and pattern volume. New techniques must be explored in order to ensure that a quality test pattern set can be generated which includes patterns for stuck-at, transition and SDD faults, all the while ensuring that the pattern volume remains economical. This thesis explores the use of a “Top-Off” ATPG methodology to generate an optimal test pattern set which can effectively screen the required fault models while containing the pattern volume within a reasonable limit

Effective Launch-to-Capture Power Reduction for LOS Scheme with Adjacent-Probability-Based X-Filling

It has become necessary to reduce power during LSI testing. Particularly, during at-speed testing, excessive power consumed during the Launch-To-Capture (LTC) cycle causes serious issues that may lead to the overkill of defect-free logic ICs. Many successful test generation approaches to reduce IR-drop and/or power supply noise during LTC for the launch-off capture (LOC) scheme have previously been proposed, and several of X-filling techniques have proven especially effective. With X-filling in the launch-off shift (LOS) scheme, however, adjacent-fill (which was originally proposed for shift-in power reduction) is used frequently. In this work, we propose a novel X-filling technique for the LOS scheme, called Adjacent-Probability-based X-Filling (AP-fill), which can reduce more LTC power than adjacent-fill. We incorporate AP-fill into a post-ATPG test modification flow consisting of test relaxation and X-filling in order to avoid the fault coverage loss and the test vector count inflation. Experimental results for larger ITC\u2799 circuits show that the proposed AP-fill technique can achieve a higher power reduction ratio than 0-fill, 1-fill, and adjacent-fill.2011 Asian Test Symposium, 20-23 November 2011, New Delhi, Indi

CAT: A Critical-Area-Targeted Test Set Modification Scheme for Reducing Launch Switching Activity in At-Speed Scan Testing

Reducing excessive launch switching activity (LSA) is now mandatory in at-speed scan testing for avoiding test-induced yield loss, and test set modification is preferable for this purpose. However, previous low-LSA test set modification methods may be ineffective since they are not targeted at reducing launch switching activity in the areas around long sensitized paths, which are spatially and temporally critical for test-induced yield loss. This paper proposes a novel CAT (Critical-Area-Targeted) low-LSA test modification scheme, which uses long sensitized paths to guide launch-safety checking, test relaxation, and X-filling. As a result, launch switching activity is reduced in a pinpoint manner, which is more effective for avoiding test-induced yield loss. Experimental results on industrial circuits demonstrate the advantage of the CAT scheme for reducing launch switching activity in at-speed scan testing.2009 Asian Test Symposium, 23-26 November 2009, Taichung, Taiwa

Efficient Test Set Modification for Capture Power Reduction

The occurrence of high switching activity when the response to a test vector is captured by flipflops in scan testing may cause excessive IR drop, resulting in significant test-induced yield loss. This paper addresses the problem with a novel method based on test set modification, featuring (1) a new constrained X-identification technique that turns a properly selected set of bits in a fullyspecified test set into X-bits without fault coverage loss, and (2) a new LCP (low capture power) X-filling technique that optimally assigns 0’s and 1’s to the X-bits for the purpose of reducing the switching activity of the resulting test set in capture mode. This method can be readily applied in any test generation flow for capture power reduction without any impact on area, timing, test set size, and fault coverage