Analyse temps-frequence et traitement des signaux RSO à haute résolution spatiale pour la surveillance des grands ouvrages d'art

The thesis is composed of two research axis. The first one consists in proposing time-frequency signal processing tools for frequency modulated continuous wave (FMCW) radars used for displacements measurements, while the second one consists in designing a spaceborne synthetic aperture radar (SAR) signal processing methodology for infrastructure monitoring when an external point cloud of the envisaged structure is available. In the first part of the thesis, we propose our solutions to the nonlinearity problem of an X-band FMCW radar designed for millimetric displacement measurements of short-range targets. The nonlinear tuning curve of the voltage controlled oscillator from the transceiver can cause a dramatic resolution degradation for wideband sweeps. To mitigate this shortcoming, we have developed two time warping-based methods adapted to wideband nonlinearities: one estimates the nonlinear terms using the high order ambiguity function, while the other is an autofocus approach which exploits the spectral concentration of the beat signal. Onwards, as the core of the thesis, we propose a novel method for scattering centers detection and tracking in spaceborne SAR images adapted to infrastructure monitoring applications. The method is based on refocusing each SAR image on a provided 3D point cloud of the envisaged infrastructure and identifying the reliable scatterers to be monitored by means of four dimensional (4D) tomography. The refocusing algorithm is compatible with stripmap, spotlight and sliding spotlight SAR images and consists of an azimuth defocusing followed by a modified back-projection algorithm on the given set of points which exploits the time-frequency structure of the defocused azimuth signal. The scattering centers of the refocused image are detected in the 4D tomography framework by testing if the main response is at zero elevation in the local elevation-velocity spectral distribution. The mean displacement velocity is estimated from the peak response on the zero elevation axis, while the displacements time series for detected single scatterers is computed as double phase difference of complex amplitudes.Finally, we present the measurement campaigns carried out on the Puylaurent water-dam and the Chastel landslide using GPS measurements, topographic surveys and laser scans to generate the point clouds of the two structures. The comparison between in-situ data and the results obtained by combining TerraSAR-X data with the generated point clouds validate the developed SAR signal processing chain.Cette thèse s'articule autour de deux axes de recherche. Le premier axe aborde les aspects méthodologiques liés au traitement temps-fréquence des signaux issus d'un radar FMCW (à onde continue modulée en fréquence) dans le contexte de la mesure des déplacements fins. Le second axe est dédié à la conception et à la validation d'une chaîne de traitement des images RSO (radar à synthèse d'ouverture) satellitaire. Lorsqu'un maillage 3D de la structure envisagée est disponible, les traitements proposés sont validés par l'intercomparaison avec les techniques conventionnelles d'auscultation des grands ouvrages d'art.D'une part, nous étudions la correction de la non-linéarité d'un radar FMCW en bande X, à courte portée, conçu pour la mesure des déplacements millimétriques. La caractéristique de commande non linéaire de l'oscillateur à large bande, entraine une perte de résolution à la réception. Afin de pallier cet inconvénient, nous avons développé deux méthodes basées sur le ré-échantillonnage temporel (time warping) dans le cas des signaux à large bande non-stationnaires. La première approche estime la loi de fréquence instantanée non linéaire à l'aide de la fonction d'ambiguïté d'ordre supérieur, tandis que la deuxième approche exploite la mesure de concentration spectrale du signal de battement dans un algorithme d'autofocus radial.D'autre part, nous proposons un cadre méthodologique général pour la détection et le pistage des centres de diffusion dans les images RSO pour la surveillance des grands ouvrages d'art. La méthode est basée sur la ré-focalisation de chaque image radar sur le maillage 3D de l'infrastructure étudiée afin d'identifier les diffuseurs pertinents par tomographie 4D (distance – azimut – élévation – vitesse de déformation). L'algorithme de ré-focalisation est parfaitement compatible avec les images RSO acquises dans les différents modes (« stripmap », « spotlight » et « sliding spotlight ») : dé-focalisation en azimut suivie par rétroprojection modifiée (conditionnée par la structure temps-fréquence du signal) sur l'ensemble donné des points. Dans la pile d'images ré-focalisées, les centres de diffusion sont détectés par tomographie 4D : test de conformité à l'hypothèse d'élévation zéro dans le plan élévation – vitesse de déformation. La vitesse moyenne correspond au maximum à l'élévation zéro, tandis que la série temporelle des déplacements est obtenue par double différence de phase des amplitudes complexes pour chaque diffuseur pertinent.Nous présentons également les campagnes in situ effectuées au barrage de Puylaurent (et glissement de Chastel) : les relevés GPS, topographiques et LIDAR sol employées au calcul des maillages 3D. La comparaison entre les déplacements mesurés in situ et les résultats obtenus par l'exploitation conjointe de la télédétection RSO satellitaires et les maillages 3D valident la chaîne de traitement proposée.Teza cuprinde două axe principale de cercetare. Prima axă abordează aspecte metodologice de prelucraretimp-frecvenţă a semnalelor furnizate de radare cu emisie continuă şi modulaţie de frecvenţă (FMCW)în contextul măsurării deplasărilor milimetrice. În cadrul celei de-a doua axe, este proiectată şi validatăo metodă de prelucrare a imaginilor satelitare SAR (radar cu apertură sintetică) ce este destinatămonitorizării infrastructurii critice şi care se bazează pe existenţa unui model 3D al structurii respective.În prima parte a tezei, sunt investigate soluţii de corecţie a neliniarităţii unui radar FMCW în bandaX destinat măsurării deplasărilor milimetrice. Caracteristica de comandă neliniară a oscilatorului debandă largă determină o degradare a rezoluţiei în distanţă. Pentru a rezolva acest inconvenient, au fostelaborate două metode de corecţie a neliniarităţii, adaptate pentru semnale de bandă largă, ce se bazeazăpe conceptul de reeşantionare neuniformă sau deformare a axei temporare. Prima abordare estimeazăparametrii neliniarităţii utilizând funcţii de ambiguitate de ordin superior, iar cea de-a doua exploateazăo măsură de concentraţie spectrală a semnalului de bătăi într-un algoritm de autofocalizare în distanţă.În a doua parte a lucrării, este propusă o metodologie generală de detecţie şi monitorizare a centrilorde împrăştiere în imagini SAR în scopul monitorizării elementelor de infrastructură critică. Metoda sebazează pe refocalizarea fiecărei imagini radar pe un model 3D al structurii investigate în scopul identificăriicentrilor de împrăştiere pertinenţi (ţinte fiabile ce pot fi monitorizate în timp) cu ajutorul tomografiei SAR4D (distanţă-azimut-elevaţie-viteză de deplasare). Algoritmul de refocalizare este compatibil cu imaginiSAR achiziţionate în moduri diferite (« stripmap », « spotlight » şi « sliding spotlight ») şi constă într-odefocalizare în azimut urmată de o retroproiecţie modificată (condiţionată de structura timp-frecvenţă asemnalului) pe modelul 3D al structurii. Ţintele sunt identificate în stiva de imagini refocalizate cu ajutorultomografiei 4D prin efectuarea unui test de conformitate cu ipoteza că centrii de împrăştiere pertinenţivor avea elevaţie zero în planul local elevaţie-viteză. Viteza medie de deformare corespunde maximuluide pe axa de elevaţie nulă, iar seria temporară a deplasărilor se obţine printr-o dublă diferenţă de fază aamplitudinilor complexe corespunzătoare ţintelor identificate.În final sunt prezentate campaniile de măsurători pe teren efectuate la un baraj şi o alunecare de terendin regiunea Puylaurent (Franţa) destinate obţinerii modelului 3D al celor două elemente de infrastructurăprin măsurători GPS, topografice şi LIDAR. Comparaţia între deformările măsurate pe teren şi rezultateleobţinute prin combinarea imaginilor SAR cu modelele 3D au permis validarea metodologiei propuse

スパースアレイ・レーダにおける信号処理技術

Tohoku University佐藤源之課

Ultra Wideband

Ultra wideband (UWB) has advanced and merged as a technology, and many more people are aware of the potential for this exciting technology. The current UWB field is changing rapidly with new techniques and ideas where several issues are involved in developing the systems. Among UWB system design, the UWB RF transceiver and UWB antenna are the key components. Recently, a considerable amount of researches has been devoted to the development of the UWB RF transceiver and antenna for its enabling high data transmission rates and low power consumption. Our book attempts to present current and emerging trends in-research and development of UWB systems as well as future expectations

Optimized techniques for real-time microwave and millimeter wave SAR imaging

Microwave and millimeter wave synthetic aperture radar (SAR)-based imaging techniques, used for nondestructive evaluation (NDE), have shown tremendous usefulness for the inspection of a wide variety of complex composite materials and structures. Studies were performed for the optimization of uniform and nonuniform sampling (i.e., measurement positions) since existing formulations of SAR resolution and sampling criteria do not account for all of the physical characteristics of a measurement (e.g., 2D limited-size aperture, electric field decreasing with distance from the measuring antenna, etc.) and nonuniform sampling criteria supports sampling below the Nyquist rate. The results of these studies demonstrate optimum sampling given design requirements that fully explain resolution dependence on sampling criteria. This work was then extended to manually-selected and nonuniformly distributed samples such that the intelligence of the user may be utilized by observing SAR images being updated in real-time. Furthermore, a novel reconstruction method was devised that uses components of the SAR algorithm to advantageously exploit the inherent spatial information contained in the data, resulting in a superior final SAR image. Furthermore, better SAR images can be obtained if multiple frequencies are utilized as compared to single frequency. To this end, the design of an existing microwave imaging array was modified to support multiple frequency measurement. Lastly, the data of interest in such an array may be corrupted by coupling among elements since they are closely spaced, resulting in images with an increased level of artifacts. A method for correcting or pre-processing the data by using an adaptation of correlation canceling technique is presented as well --Abstract, page iii