Stabilizability and Motion Tracking Conditions for Mechanical Nonholonomic Control Systems

This paper addresses formulation of stabilizability and motion tracking conditions for mechanical systems from the point of view of constraints put on them. We present a new classification of constraints, which includes nonholonomic constraints that arise in both mechanics and control. Based on our classification we develop kinematic and dynamic control models of systems subjected to these constraints. We demonstrate that a property of being a “hard-to-control” nonholonomic system may not be related to the nature of the constraints. It may result from the formulation of control objectives for a system. We examine two control objectives which are stabilization to the target equilibrium by a continuous static state feedback control and motion tracking. Theory is illustrated with examples of control objective formulations for systems with constraints of various types

Advanced Strategies for Robot Manipulators

Amongst the robotic systems, robot manipulators have proven themselves to be of increasing importance and are widely adopted to substitute for human in repetitive and/or hazardous tasks. Modern manipulators are designed complicatedly and need to do more precise, crucial and critical tasks. So, the simple traditional control methods cannot be efficient, and advanced control strategies with considering special constraints are needed to establish. In spite of the fact that groundbreaking researches have been carried out in this realm until now, there are still many novel aspects which have to be explored

Flexible joint robotic manipulator: Modeling and design of robust control law

This paper presents modeling and sophisticated control of a single Degree Of Freedom (DOF) flexible robotic arm. The derived model is based on Euler-Lagrange approach while the first and second order (super twisting) Sliding Mode Control (SMC) is proposed as a non-linear control strategy. The control laws are subjected to various test inputs including step and sinusoids to demonstrate their tracking efficiency by observing transient and steady state behaviours. Both orders of SMC are then compared to characterize the control performance in terms of robustness, handling external disturbances and chattering. Results dictate that the super twisting SMC is more accurate and robust against the external noise and chattering phenomena compared to the first order SMC

Model Based Control of Soft Robots: A Survey of the State of the Art and Open Challenges

Continuum soft robots are mechanical systems entirely made of continuously deformable elements. This design solution aims to bring robots closer to invertebrate animals and soft appendices of vertebrate animals (e.g., an elephant's trunk, a monkey's tail). This work aims to introduce the control theorist perspective to this novel development in robotics. We aim to remove the barriers to entry into this field by presenting existing results and future challenges using a unified language and within a coherent framework. Indeed, the main difficulty in entering this field is the wide variability of terminology and scientific backgrounds, making it quite hard to acquire a comprehensive view on the topic. Another limiting factor is that it is not obvious where to draw a clear line between the limitations imposed by the technology not being mature yet and the challenges intrinsic to this class of robots. In this work, we argue that the intrinsic effects are the continuum or multi-body dynamics, the presence of a non-negligible elastic potential field, and the variability in sensing and actuation strategies.Comment: 69 pages, 13 figure

Control and safety of fully actuated and underactuated nonlinear systems: from adaptation to robustness to optimality

The state-of-the-art quadratic program-based control Lyapunov-control barrier function (QP-CLBF) is a powerful control approach to balance safety and stability in a pointwise optimal fashion. However, under this approach, modeling inaccuracies may degrade the performance of closed-loop systems and cause a violation of safety-critical constraints. This thesis extends the recently-developed QP-CLBF through the derivation of five novel robust quadratic program-based adaptive control approaches for fully actuated and underactuated nonlinear systems with a view toward adapting to unknown parameters, being robust to unmodeled dynamics and disturbances, ensuring the system remains in safe sets and being optimal with respect in a pointwise fashion. Simulation and quantitative results demonstrate the superiority of proposed approaches over the baseline methods.Ph.D

Parallel Manipulators

In recent years, parallel kinematics mechanisms have attracted a lot of attention from the academic and industrial communities due to potential applications not only as robot manipulators but also as machine tools. Generally, the criteria used to compare the performance of traditional serial robots and parallel robots are the workspace, the ratio between the payload and the robot mass, accuracy, and dynamic behaviour. In addition to the reduced coupling effect between joints, parallel robots bring the benefits of much higher payload-robot mass ratios, superior accuracy and greater stiffness; qualities which lead to better dynamic performance. The main drawback with parallel robots is the relatively small workspace. A great deal of research on parallel robots has been carried out worldwide, and a large number of parallel mechanism systems have been built for various applications, such as remote handling, machine tools, medical robots, simulators, micro-robots, and humanoid robots. This book opens a window to exceptional research and development work on parallel mechanisms contributed by authors from around the world. Through this window the reader can get a good view of current parallel robot research and applications

Kinematics and Robot Design I, KaRD2018

This volume collects the papers published on the Special Issue “Kinematics and Robot Design I, KaRD2018” (https://www.mdpi.com/journal/robotics/special_issues/KARD), which is the first issue of the KaRD Special Issue series, hosted by the open access journal “MDPI Robotics”. The KaRD series aims at creating an open environment where researchers can present their works and discuss all the topics focused on the many aspects that involve kinematics in the design of robotic/automatic systems. Kinematics is so intimately related to the design of robotic/automatic systems that the admitted topics of the KaRD series practically cover all the subjects normally present in well-established international conferences on “mechanisms and robotics”. KaRD2018 received 22 papers and, after the peer-review process, accepted only 14 papers. The accepted papers cover some theoretical and many design/applicative aspects