Intra-Body Communications for Nervous System Applications: Current Technologies and Future Directions

The Internet of Medical Things (IoMT) paradigm will enable next generation healthcare by enhancing human abilities, supporting continuous body monitoring and restoring lost physiological functions due to serious impairments. This paper presents intra-body communication solutions that interconnect implantable devices for application to the nervous system, challenging the specific features of the complex intra-body scenario. The presented approaches include both speculative and implementative methods, ranging from neural signal transmission to testbeds, to be applied to specific neural diseases therapies. Also future directions in this research area are considered to overcome the existing technical challenges mainly associated with miniaturization, power supply, and multi-scale communications.Comment: https://www.sciencedirect.com/science/article/pii/S138912862300163

A survey on wireless body area networks for eHealthcare systems in residential environments

The progress in wearable and implanted health monitoring technologies has strong potential to alter the future of healthcare services by enabling ubiquitous monitoring of patients. A typical health monitoring system consists of a network of wearable or implanted sensors that constantly monitor physiological parameters. Collected data are relayed using existing wireless communication protocols to the base station for additional processing. This article provides researchers with information to compare the existing low-power communication technologies that can potentially support the rapid development and deployment of WBAN systems, and mainly focuses on remote monitoring of elderly or chronically ill patients in residential environments

SkinnySensor: Enabling Battery-Less Wearable Sensors Via Intrabody Power Transfer

Tremendousadvancement inultra-low powerelectronics and radiocommunica tionshas significantly contributed towards the fabrication of miniaturized biomedical sensors capable of capturing physiological data and transmitting them wirelessly. However, most of the wearable sensors require a battery for their operation. The battery serves as one of the critical bottlenecks to the development of novel wearable applications, as the limitations offered by batteries are affecting the development of new form-factors and longevity of wearable devices. In this work, we introduce a novel concept, namely Intra-Body Power Transfer (IBPT), to alleviate the limitations and problems associated with batteries, and enable wireless, batteryless wearable devices. The innovation of IBPT is to utilize the human body as the medium to transfer power to passive wearable devices, as opposed to employingon-boardbatteries for each individual device. The proposed platform eliminates the on-board rigid battery for ultra-low power and ultra-miniaturized sensors such that their form-factor can be flexible, ergonomically designed to be placed on small body parts. The platform also eliminates the need for battery maintenance (e.g., recharging or replacement) for multiple wearable devices other than the central power source. The performance of the developed system is tested and evaluated in comparison to traditional Radio Frequency based solutions that can be harmful to human interaction. The system developed is capable of harvesting on average 217µW at 0.43V and provides an average sleep/high impedance mode voltage of 4.5V

User Recognition Based on Human Body Impulse Response: A Feasibility Study

Human recognition technologies for security systems require high reliability and easy accessibility in the advent of the internet of things (IoT). While several biometric approaches have been studied for user recognition, there are demands for more convenient techniques suitable for the IoT devices. Recently, electrical frequency responses of the human body have been unveiled as one of promising biometric signals, but the pilot studies are inconclusive about the characteristics of human body as a transmission medium for electric signals. This paper provides a multi-domain analysis of human body impulse responses (HBIR) measured at the receiver when customized impulse signals are passed through the human body. We analyzed the impulse responses in the time, frequency, and wavelet domains and extracted representative feature vectors using a proposed accumulated difference metric in each domain. The classification performance was tested using the k-nearest neighbors (KNN) algorithm and the support vector machine (SVM) algorithm on 10-day data acquired from five subjects. The average classification accuracies of the simple classifier KNN for the time, frequency, and wavelet features reached 92.99%, 77.01%, and 94.55%, respectively. In addition, the kernel-based SVM slightly improved the accuracies of three features by 0.58%, 2.34%, and 0.42%, respectively. The result shows potential of the proposed approach for user recognition based on HBIR

A Periodic Transmission Line Model for Body Channel Communication

Body channel communication (BCC) is a technique for data transmission exploiting the human body as communication channel. Even though it was pioneered about 25 years ago, the identification of a good electrical model behind its functioning is still an open research question. The proposed distributed model can then serve as a supporting tool for the design, allowing to enhance the performances of any BCC system. A novel finite periodic transmission line model was developed to describe the human body as transmission medium. According to this model, for the first time, the parasitic capacitance between the transmitter and the receiver is assumed to depend on their distance. The parameters related to the body and electrodes are acquired experimentally by fitting the bio-impedentiometric measurements, in the range of frequencies from 1 kHz to 1 MHz, obtaining a mean absolute error lower than 4° and 30 $Omega$ for the phase angle and impedance modulus, respectively. The proposed mathematical framework has been successfully validated by describing a ground-referred and low-complexity system called Live Wire, suitable as supporting tool for visually impaired people, and finding good agreement between the measured and the calculated data, marking a ±3% error for communication distances ranging from 20 to 150 cm. In this work we introduced a new circuital approach, for capacitive-coupling systems, based on finite periodic transmission line, capable to describe and model BCC systems allowing to optimize the performances of similar systems

A Periodic Transmission Line Model for Body Channel Communication

Body channel communication (BCC) is a technique for data transmission exploiting the human body as communication channel. Even though it was pioneered about 25 years ago, the identification of a good electrical model behind its functioning is still an open research question. The proposed distributed model can then serve as a supporting tool for the design, allowing to enhance the performances of any BCC system. A novel finite periodic transmission line model was developed to describe the human body as transmission medium. According to this model, for the first time, the parasitic capacitance between the transmitter and the receiver is assumed to depend on their distance. The parameters related to the body and electrodes are acquired experimentally by fitting the bio-impedentiometric measurements, in the range of frequencies from 1 kHz to 1 MHz, obtaining a mean absolute error lower than 4° and 30Ω for the phase angle and impedance modulus, respectively. The proposed mathematical framework has been successfully validated by describing a ground-referred and low-complexity system called Live Wire, suitable as supporting tool for visually impaired people, and finding good agreement between the measured and the calculated data, marking a ±3% error for communication distances ranging from 20 to 150 cm. In this work we introduced a new circuital approach, for capacitive-coupling systems, based on finite periodic transmission line, capable to describe and model BCC systems allowing to optimize the performances of similar systems

In-body Communications Exploiting Light:A Proof-of-concept Study Using ex vivo Tissue Samples

This article presents a feasibility study on the transmission of information through the biological tissues exploiting light. The experimental results demonstrating the potentials of optical wireless communications through biological tissues (OCBT) are presented. The main application of the proposed technology is in-body communications, where wireless connectivity needs to be provided to implanted electronic devices, such as pacemakers, cardiac defibrillators, and smart pills, for instance. Traditionally, in-body communications are performed using radio and acoustic waves. However, light has several fundamental advantages making the proposed technology highly attractive for this purpose. In particular, optical communications are highly secure, private, safe, and in many cases, extremely simple with the potential of low-power implementation. In the experiments, near-infrared light was used, as the light propagation in biotissues is more favorable in this part of the spectrum. The amount of light exposure given to biotissues was controlled to keep it within the safety limits. Information transmission experiments were carried out with the temperature-controlled ex vivo samples of porcine tissue. The tissue temperature was found to be significantly affecting the light propagation process. Communication performance with respect to the biotissue thickness and light direction was assessed. The results showed that optical channels to and from the possible implant are nearly reciprocal. Communication links were established to the deepness of more than four centimeters, and the data rates of up to 100 Kbps were obtained. The encouraging results of this study allow us to anticipate the potential applications of the proposed light-based technology to communicate with the various electronic devices implanted at different depths in the human body

Vehicle electrification: technologies, challenges and a global perspective for smart grids

Nowadays, due to economic and climate concerns, the private transportation sector is shifting for the vehicle electrification, mainly supported by electric and hybrid plug-in vehicles. For this new reality, new challenges about operation modes are emerging, demanding a cooperative and dynamic operation with the electrical power grid, guaranteeing a stable integration without omitting the power quality for the grid-side and for the vehicle-side. Besides the operation modes, new attractive and complementary technologies are offered by the vehicle electrification in the context of smart grids, which are valid for both on-board and off-board systems. In this perspective, this book chapter presents a global perspective and deals with challenges for the vehicle electrification, covering the key technologies toward a sustainable future. Among others, the flowing topics are covered: (1) Overview of power electronics structures for battery charging systems, including on-board and off-board systems; (2) State-of-the-art of communication technologies for application in the context of vehicular electrification, smart grids and smart homes; (3) Challenges and opportunities concerning wireless power transfer with bidirectional interface to the electrical grid; (4) Future perspectives about bidirectional power transfer between electric vehicles (vehicle-to-vehicle operation mode); (5) Unified technologies, allowing to combine functionalities of a bidirectional interface with the electrical grid and motor driver based on a single system; and (6) Smart grids and smart homes scenarios and accessible opportunities about operation modes.Fundação para a Ciência e Tecnologia (FCT