A design concept for radiation hardened RADFET readout system for space applications

Instruments for measuring the absorbed dose and dose rate under radiation exposure, known as radiation dosimeters, are indispensable in space missions. They are composed of radiation sensors that generate current or voltage response when exposed to ionizing radiation, and processing electronics for computing the absorbed dose and dose rate. Among a wide range of existing radiation sensors, the Radiation Sensitive Field Effect Transistors (RADFETs) have unique advantages for absorbed dose measurement, and a proven record of successful exploitation in space missions. It has been shown that the RADFETs may be also used for the dose rate monitoring. In that regard, we propose a unique design concept that supports the simultaneous operation of a single RADFET as absorbed dose and dose rate monitor. This enables to reduce the cost of implementation, since the need for other types of radiation sensors can be minimized or eliminated. For processing the RADFET's response we propose a readout system composed of analog signal conditioner (ASC) and a self-adaptive multiprocessing system-on-chip (MPSoC). The soft error rate of MPSoC is monitored in real time with embedded sensors, allowing the autonomous switching between three operating modes (high-performance, de-stress and fault-tolerant), according to the application requirements and radiation conditions

Fast and accurate SER estimation for large combinational blocks in early stages of the design

Soft Error Rate (SER) estimation is an important challenge for integrated circuits because of the increased vulnerability brought by technology scaling. This paper presents a methodology to estimate in early stages of the design the susceptibility of combinational circuits to particle strikes. In the core of the framework lies MASkIt , a novel approach that combines signal probabilities with technology characterization to swiftly compute the logical, electrical, and timing masking effects of the circuit under study taking into account all input combinations and pulse widths at once. Signal probabilities are estimated applying a new hybrid approach that integrates heuristics along with selective simulation of reconvergent subnetworks. The experimental results validate our proposed technique, showing a speedup of two orders of magnitude in comparison with traditional fault injection estimation with an average estimation error of 5 percent. Finally, we analyze the vulnerability of the Decoder, Scheduler, ALU, and FPU of an out-of-order, superscalar processor design.This work has been partially supported by the Spanish Ministry of Economy and Competitiveness and Feder Funds under grant TIN2013-44375-R, by the Generalitat de Catalunya under grant FI-DGR 2016, and by the FP7 program of the EU under contract FP7-611404 (CLERECO).Peer ReviewedPostprint (author's final draft

A Methodology to Emulate Single Event Upsets in Flip-Flops using FPGAs through Partial Reconfiguration and Instrumentation

This paper presents a methodology to emulate Single Event Upsets (SEUs) in FPGA flip-flops (FFs). Since the content of a FF is not modifiable through the FPGA configuration memory bits, a dedicated design is required for fault injection in the FFs. The method proposed in this paper is a hybrid approach that combines FPGA partial reconfiguration and extra logic added to the circuit under test, without modifying its operation. This approach has been integrated into a fault-injection platform, named NESSY (Non intrusive ErrorS injection SYstem), developed by our research group. Finally, this paper includes results on a Virtex-5 FPGA demonstrating the validity of the method on the ITC’99 benchmark set and a Feed-Forward Equalization (FFE) filter. In comparison with other approaches in the literature, this methodology reduces the resource consumption introduced to carry out the fault injection in FFs, at the cost of adding very little time overhead (1.6 �μs per fault)

Network Interface Design for Network-on-Chip

In the culture of globalized integrated circuit (IC, a.k.a chip) production, the use of Intellectual Property (IP) cores, computer aided design tools (CAD) and testing services from un-trusted vendors are prevalent to reduce the time to market. Unfortunately, the globalized business model potentially creates opportunities for hardware tampering and modification from adversary, and this tampering is known as hardware Trojan (HT). Network-on-chip (NoC) has emerged as an efficient on-chip communication infrastructure. In this work, the security aspects of NoC network interface (NI), one of the most critical components in NoC will be investigated and presented. Particularly, the NI design, hardware attack models and countermeasures for NI in a NoC system are explored. An OCP compatible NI is implemented in an IBM0.18ìm CMOS technology. The synthesis results are presented and compared with existing literature. Second, comprehensive hardware attack models targeted for NI are presented from system level to circuit level. The impact of hardware Trojans on NoC functionality and performance are evaluated. Finally, a countermeasure method is proposed to address the hardware attacks in NIs