Experimental comparison of parameter estimation methods in adaptive robot control

In the literature on adaptive robot control a large variety of parameter estimation methods have been proposed, ranging from tracking-error-driven gradient methods to combined tracking- and prediction-error-driven least-squares type adaptation methods. This paper presents experimental data from a comparative study between these adaptation methods, performed on a two-degrees-of-freedom robot manipulator. Our results show that the prediction error concept is sensitive to unavoidable model uncertainties. We also demonstrate empirically the fast convergence properties of least-squares adaptation relative to gradient approaches. However, in view of the noise sensitivity of the least-squares method, the marginal performance benefits, and the computational burden, we (cautiously) conclude that the tracking-error driven gradient method is preferred for parameter adaptation in robotic applications

Cooperative Adaptive Control for Cloud-Based Robotics

This paper studies collaboration through the cloud in the context of cooperative adaptive control for robot manipulators. We first consider the case of multiple robots manipulating a common object through synchronous centralized update laws to identify unknown inertial parameters. Through this development, we introduce a notion of Collective Sufficient Richness, wherein parameter convergence can be enabled through teamwork in the group. The introduction of this property and the analysis of stable adaptive controllers that benefit from it constitute the main new contributions of this work. Building on this original example, we then consider decentralized update laws, time-varying network topologies, and the influence of communication delays on this process. Perhaps surprisingly, these nonidealized networked conditions inherit the same benefits of convergence being determined through collective effects for the group. Simple simulations of a planar manipulator identifying an unknown load are provided to illustrate the central idea and benefits of Collective Sufficient Richness.Comment: ICRA 201

Robot Composite Learning and the Nunchaku Flipping Challenge

Advanced motor skills are essential for robots to physically coexist with humans. Much research on robot dynamics and control has achieved success on hyper robot motor capabilities, but mostly through heavily case-specific engineering. Meanwhile, in terms of robot acquiring skills in a ubiquitous manner, robot learning from human demonstration (LfD) has achieved great progress, but still has limitations handling dynamic skills and compound actions. In this paper, we present a composite learning scheme which goes beyond LfD and integrates robot learning from human definition, demonstration, and evaluation. The method tackles advanced motor skills that require dynamic time-critical maneuver, complex contact control, and handling partly soft partly rigid objects. We also introduce the "nunchaku flipping challenge", an extreme test that puts hard requirements to all these three aspects. Continued from our previous presentations, this paper introduces the latest update of the composite learning scheme and the physical success of the nunchaku flipping challenge

Dynamic modeling, property investigation, and adaptive controller design of serial robotic manipulators modeled with structural compliance

Research results on general serial robotic manipulators modeled with structural compliances are presented. Two compliant manipulator modeling approaches, distributed and lumped parameter models, are used in this study. System dynamic equations for both compliant models are derived by using the first and second order influence coefficients. Also, the properties of compliant manipulator system dynamics are investigated. One of the properties, which is defined as inaccessibility of vibratory modes, is shown to display a distinct character associated with compliant manipulators. This property indicates the impact of robot geometry on the control of structural oscillations. Example studies are provided to illustrate the physical interpretation of inaccessibility of vibratory modes. Two types of controllers are designed for compliant manipulators modeled by either lumped or distributed parameter techniques. In order to maintain the generality of the results, neither linearization is introduced. Example simulations are given to demonstrate the controller performance. The second type controller is also built for general serial robot arms and is adaptive in nature which can estimate uncertain payload parameters on-line and simultaneously maintain trajectory tracking properties. The relation between manipulator motion tracking capability and convergence of parameter estimation properties is discussed through example case studies. The effect of control input update delays on adaptive controller performance is also studied

Integral Resonant Control for vibration damping and precise tip-positioning of a single-link flexible manipulator

Peer reviewedPostprin

Robot graphic simulation testbed

The objective of this research was twofold. First, the basic capabilities of ROBOSIM (graphical simulation system) were improved and extended by taking advantage of advanced graphic workstation technology and artificial intelligence programming techniques. Second, the scope of the graphic simulation testbed was extended to include general problems of Space Station automation. Hardware support for 3-D graphics and high processing performance make high resolution solid modeling, collision detection, and simulation of structural dynamics computationally feasible. The Space Station is a complex system with many interacting subsystems. Design and testing of automation concepts demand modeling of the affected processes, their interactions, and that of the proposed control systems. The automation testbed was designed to facilitate studies in Space Station automation concepts

Designing LMPA-Based Smart Materials for Soft Robotics Applications

This doctoral research, Designing LMPA (Low Melting Point Alloy) Based Smart Materials for Soft Robotics Applications, includes the following topics: (1) Introduction; (2) Robust Bicontinuous Metal-Elastomer Foam Composites with Highly Tunable Mechanical Stiffness; (3) Actively Morphing Drone Wing Design Enabled by Smart Materials for Green Unmanned Aerial Vehicles; (4) Dynamically Tunable Friction via Subsurface Stiffness Modulation; (5) LMPA Wool Sponge Based Smart Materials with Tunable Electrical Conductivity and Tunable Mechanical Stiffness for Soft Robotics; and (6) Contributions and Future Work.Soft robots are developed to interact safely with environments. Smart composites with tunable properties have found use in many soft robotics applications including robotic manipulators, locomotors, and haptics. The purpose of this work is to develop new smart materials with tunable properties (most importantly, mechanical stiffness) upon external stimuli, and integrate these novel smart materials in relevant soft robots. Stiffness tunable composites developed in previous studies have many drawbacks. For example, there is not enough stiffness change, or they are not robust enough. Here, we explore soft robotic mechanisms integrating stiffness tunable materials and innovate smart materials as needed to develop better versions of such soft robotic mechanisms. First, we develop a bicontinuous metal-elastomer foam composites with highly tunable mechanical stiffness. Second, we design and fabricate an actively morphing drone wing enabled by this smart composite, which is used as smart joints in the drone wing. Third, we explore composite pad-like structures with dynamically tunable friction achieved via subsurface stiffness modulation (SSM). We demonstrate that when these composite structures are properly integrated into soft crawling robots, the differences in friction of the two ends of these robots through SSM can be used to generate translational locomotion for untethered crawling robots. Also, we further develop a new class of smart composite based on LMPA wool sponge with tunable electrical conductivity and tunable stiffness for soft robotics applications. The implications of these studies on novel smart materials design are also discussed