Composable architecture for rack scale big data computing

The rapid growth of cloud computing, both in terms of the spectrum and volume of cloud workloads, necessitate re-visiting the traditional rack-mountable servers based datacenter design. Next generation datacenters need to offer enhanced support for: (i) fast changing system configuration requirements due to workload constraints, (ii) timely adoption of emerging hardware technologies, and (iii) maximal sharing of systems and subsystems in order to lower costs. Disaggregated datacenters, constructed as a collection of individual resources such as CPU, memory, disks etc., and composed into workload execution units on demand, are an interesting new trend that can address the above challenges. In this paper, we demonstrated the feasibility of composable systems through building a rack scale composable system prototype using PCIe switch. Through empirical approaches, we develop assessment of the opportunities and challenges for leveraging the composable architecture for rack scale cloud datacenters with a focus on big data and NoSQL workloads. In particular, we compare and contrast the programming models that can be used to access the composable resources, and developed the implications for the network and resource provisioning and management for rack scale architecture

Predictable and composable system-on-chip memory controllers

Contemporary System-on-Chip (SoC) become more and more complex, as increasing integration results in a larger number of concurrently executing applications. These applications consist of tasks that are mapped on heterogeneous multi-processor platforms with distributed memory hierarchies, where SRAMs and SDRAMs are shared by a variety of arbiters. Some applications have real-time requirements, meaning that they must perform a particular computation before a deadline to guarantee functional correctness, or to prevent quality degradation. Mapping the applications on the platform such that all real-time requirements are satisfied is very challenging. The number of possible mappings of tasks to processing elements and data structures to memories may be large, and appropriate configuration settings must be determined once the mapping is chosen. Verifying that a particular mapping satisfies all application requirements is typically done by system-level simulation. However, resource sharing causes interference between applications, making their temporal behaviors inter-dependent. All concurrently executing applications must hence be verified together, causing the verification complexity of the system to increase exponentially with the number of applications. Together these factors contribute to making the integration and verification process a dominant part of SoC development, both in terms of time and money. Predictable and composable systems are proposed to manage the increasing verification complexity. Predictable systems provide lower bounds on application performance, while applications in composable systems are completely isolated and cannot affect each other’s temporal behavior by even a single clock cycle. Predictable systems enable formal verification that covers all possible interactions with the platform. However, this assumes that the behavior of an application is captured in a performance model, which is not the case for many applications. Composability offers a complementary verification approach by letting these applications be verified independently by simulation with linear verification complexity. A limitation of current predictable and composable systems is that there are no memory controllers supporting the concepts in a general way. Current SRAM controllers can be shared in a predictable way with a variety of arbiters, but are only composable if statically scheduled or shared using time-division multiplexing. Existing SDRAM controllers are not composable, and are either unpredictable or limited to applications that are statically scheduled. This thesis addresses the limitations of current predictable and composable systems by proposing a general predictable and composable memory controller, thereby addressing the mapping and verification problem in embedded systems. The proposed memory controller is divided into a front-end and a back-end. The back-end is specific for DDR2/DDR3 SDRAM and makes the memory behave in a predictable manner using precomputed memory patterns that are dynamically combined at run time. The front-end contains buffering and an arbiter in the class of Latency-Rate (LR) servers, which is a class with many well-known predictable arbiters. We extend this class with a Credit-Controlled Static-Priority (CCSP) arbiter that is developed specifically for shared resources with latency-critical requestors and high loads, such as memories. Three key features of CCSP are: 1) It accommodates latency-critical requestors with low bandwidth requirements without wasting bandwidth. 2) Over-allocated bandwidth can be made negligible at an increased area cost, without affecting latency. 3) It has a small implementation that runs fast enough to keep up with most DDR2/DDR3 memories. The proposed front-end is general and can be used with other predictable resources, such as SRAM controllers. The proposed memory controller hence supports multiple arbiter and memory types, thus addressing the diversity in modern SoCs. The combination of front-end and predictable memory behaves like a LR server, which is the shared resource abstraction used in this work. In essence, a LR server guarantees a requestor a minimum bandwidth and a maximum latency, enabling formal verification of real-time requirements. The LR server model is compatible with several commonly used formal analysis frameworks, such as network calculus and data-flow analysis. Our memory controller hence allows any combination of predictable memory and LR arbiter to be used transparently for formal verification of applications with any of these frameworks. Sharing a predictable memory at run-time results in interference between requestors, making the memory controller non-composable. This is addressed by adding a Delay Block to the front-end that delays all signals sent from the front-end to a requestor to always emulate worst-case interference. This makes requestors unable to affect each other’s temporal behavior, which is sufficient to guarantee composability on the level of applications. Our predictable memory controller hence offers composable service with a variety of memory and arbiter types, which widely extends the scope of composable platforms. Another benefit of this approach is that it enables composable service to be dynamically enabled and disabled, enabling requestors that do not require composable service to use slack bandwidth to improve performance. The predictable and composable memory controller is supported by a configuration flow that automatically computes memory patterns and arbiter settings to satisfy given bandwidth and latency requirements. The flow uses abstraction to separate the configuration of the memory and the arbiter, enabling settings to be computed in a streamlined fashion for all supported memories and arbiters

Modeling high-performance wormhole NoCs for critical real-time embedded systems

Manycore chips are a promising computing platform to cope with the increasing performance needs of critical real-time embedded systems (CRTES). However, manycores adoption by CRTES industry requires understanding task's timing behavior when their requests use manycore's network-on-chip (NoC) to access hardware shared resources. This paper analyzes the contention in wormhole-based NoC (wNoC) designs - widely implemented in the high-performance domain - for which we introduce a new metric: worst-contention delay (WCD) that captures wNoC impact on worst-case execution time (WCET) in a tighter manner than the existing metric, worst-case traversal time (WCTT). Moreover, we provide an analytical model of the WCD that requests can suffer in a wNoC and we validate it against wNoC designs resembling those in the Tilera-Gx36 and the Intel-SCC 48-core processors. Building on top of our WCD analytical model, we analyze the impact on WCD that different design parameters such as the number of virtual channels, and we make a set of recommendations on what wNoC setups to use in the context of CRTES.Peer ReviewedPostprint (author's final draft

A reconfigurable real-time SDRAM controller for mixed time-criticality systems

Verifying real-time requirements of applications is increasingly complex on modern Systems-on-Chips (SoCs). More applications are integrated into one system due to power, area and cost constraints. Resource sharing makes their timing behavior interdependent, and as a result the verification complexity increases exponentially with the number of applications. Predictable and composable virtual platforms solve this problem by enabling verification in isolation, but designing SoC resources suitable to host such platforms is challenging. This paper focuses on a reconfigurable SDRAM controller for predictable and composable virtual platforms. The main contributions are: 1) A run-time reconfigurable SDRAM controller architecture, which allows trade-offs between guaranteed bandwidth, response time and power. 2) A methodology for offering composable service to memory clients, by means of composable memory patterns. 3) A reconfigurable Time-Division Multiplexing (TDM) arbiter and an associated reconfiguration protocol. The TDM slot allocations can be changed at run time, while the predictable and composable performance guarantees offered to active memory clients are unaffected by the reconfiguration. The SDRAM controller has been implemented as a TLM-level SystemC model, and in synthesizable VHDL for use on an FPGA

Evaluating Emerging CXL-enabled Memory Pooling for HPC Systems

Current HPC systems provide memory resources that are statically configured and tightly coupled with compute nodes. However, workloads on HPC systems are evolving. Diverse workloads lead to a need for configurable memory resources to achieve high performance and utilization. In this study, we evaluate a memory subsystem design leveraging CXL-enabled memory pooling. Two promising use cases of composable memory subsystems are studied -- fine-grained capacity provisioning and scalable bandwidth provisioning. We developed an emulator to explore the performance impact of various memory compositions. We also provide a profiler to identify the memory usage patterns in applications and their optimization opportunities. Seven scientific and six graph applications are evaluated on various emulated memory configurations. Three out of seven scientific applications had less than 10% performance impact when the pooled memory backed 75% of their memory footprint. The results also show that a dynamically configured high-bandwidth system can effectively support bandwidth-intensive unstructured mesh-based applications like OpenFOAM. Finally, we identify interference through shared memory pools as a practical challenge for adoption on HPC systems.Comment: 10 pages, 13 figures. Accepted for publication in Workshop on Memory Centric High Performance Computing (MCHPC'22) at SC2

A composable, energy-managed, real-time MPSOC platform.

Multi-processors systems on chip (MPSOC) platforms emerged in embedded systems as hardware solutions to support the continuously increasing functionality and performance demands in this domain. Such a platform has to execute a mix of applications with diverse performance and timing constraints, i.e., real-time or non-real-time, thus different application schedulers should co-exist on an MPSOC. Moreover, applications share many MPSOC resources, thus their timing depends on the arbitration at these resources. Arbitration may create inter-application dependencies, e.g., the timing of a low priority application depends on the timing of all higher priority ones. Application inter-dependencies make the functional and timing verification and the integration process harder. This is especially problematic for real-time applications, for which fulfilling the time-related constraints should be guaranteed by construction. Moreover, energy and power management, commonly employed in embedded systems, make this verification even more difficult. Typically, energy and power management involves scaling the resources operating point, which has a direct impact on the resource performance, thus influences the application time behaviour. Finally, a small change in one application leads to the need to re-verify all other applications, incurring a large effort. Composability is a property meant to ease the verification and integration process. A system is composable if the functionality and the timing behaviour of each application is independent of other applications mapped on the same platform. Composability is achieved by utilising arbiters that ensure applications independence. In this paper we present the concepts behind a composable, scalable, energy-managed MPSOC platform, able to support different real-time and nonreal time schedulers concurrently, and discuss its advantages and limitations