Approximate Computing Survey, Part II: Application-Specific & Architectural Approximation Techniques and Applications

The challenging deployment of compute-intensive applications from domains such Artificial Intelligence (AI) and Digital Signal Processing (DSP), forces the community of computing systems to explore new design approaches. Approximate Computing appears as an emerging solution, allowing to tune the quality of results in the design of a system in order to improve the energy efficiency and/or performance. This radical paradigm shift has attracted interest from both academia and industry, resulting in significant research on approximation techniques and methodologies at different design layers (from system down to integrated circuits). Motivated by the wide appeal of Approximate Computing over the last 10 years, we conduct a two-part survey to cover key aspects (e.g., terminology and applications) and review the state-of-the art approximation techniques from all layers of the traditional computing stack. In Part II of our survey, we classify and present the technical details of application-specific and architectural approximation techniques, which both target the design of resource-efficient processors/accelerators & systems. Moreover, we present a detailed analysis of the application spectrum of Approximate Computing and discuss open challenges and future directions.Comment: Under Review at ACM Computing Survey

Low Power Digital Filter Implementation in FPGA

Digital filters suitable for hearing aid application on low power perspective have been developed and implemented in FPGA in this dissertation. Hearing aids are primarily meant for improving hearing and speech comprehensions. Digital hearing aids score over their analog counterparts. This happens as digital hearing aids provide flexible gain besides facilitating feedback reduction and noise elimination. Recent advances in DSP and Microelectronics have led to the development of superior digital hearing aids. Many researchers have investigated several algorithms suitable for hearing aid application that demands low noise, feedback cancellation, echo cancellation, etc., however the toughest challenge is the implementation. Furthermore, the additional constraints are power and area. The device must consume as minimum power as possible to support extended battery life and should be as small as possible for increased portability. In this thesis we have made an attempt to investigate possible digital filter algorithms those are hardware configurable on low power view point. Suitability of decimation filter for hearing aid application is investigated. In this dissertation decimation filter is implemented using ‘Distributed Arithmetic’ approach.While designing this filter, it is observed that, comb-half band FIR-FIR filter design uses less hardware compared to the comb-FIR-FIR filter design. The power consumption is also less in case of comb-half band FIR-FIR filter design compared to the comb-FIR-FIR filter. This filter is implemented in Virtex-II pro board from Xilinx and the resource estimator from the system generator is used to estimate the resources. However ‘Distributed Arithmetic’ is highly serial in nature and its latency is high; power consumption found is not very low in this type of filter implementation. So we have proceeded for ‘Adaptive Hearing Aid’ using Booth-Wallace tree multiplier. This algorithm is also implemented in FPGA and power calculation of the whole system is done using Xilinx Xpower analyser. It is observed that power consumed by the hearing aid with Booth-Wallace tree multiplier is less than the hearing aid using Booth multiplier (about 25%). So we can conclude that the hearing aid using Booth-Wallace tree multiplier consumes less power comparatively. The above two approached are purely algorithmic approach. Next we proceed to combine circuit level VLSI design and with algorithmic approach for further possible reduction in power. A MAC based FDF-FIR filter (algorithm) that uses dual edge triggered latch (DET) (circuit) is used for hearing aid device. It is observed that DET based MAC FIR filter consumes less power than the traditional (single edge triggered, SET) one (about 41%). The proposed low power latch provides a power saving upto 65% in the FIR filter. This technique consumes less power compared to previous approaches that uses low power technique only at algorithmic abstraction level. The DET based MAC FIR filter is tested for real-time validation and it is observed that it works perfectly for various signals (speech, music, voice with music). The gain of the filter is tested and is found to be 27 dB (maximum) that matches with most of the hearing aid (manufacturer’s) specifications. Hence it can be concluded that FDF FIR digital filter in conjunction with low power latch is a strong candidate for hearing aid application

Cross-Layer Automated Hardware Design for Accuracy-Configurable Approximate Computing

Approximate Computing trades off computation accuracy against performance or energy efficiency. It is a design paradigm that arose in the last decade as an answer to diminishing returns from Dennard\u27s scaling and a shift in the prominent workloads. A range of modern workloads, categorized mainly as recognition, mining, and synthesis, features an inherent tolerance to approximations. Their characteristics, such as redundancies in their input data and robust-to-noise algorithms, allow them to produce outputs of acceptable quality, despite an approximation in some of their computations. Approximate Computing leverages the application tolerance by relaxing the exactness in computation towards primary design goals of increasing performance or improving energy efficiency. Existing techniques span across the abstraction layers of computer systems where cross-layer techniques are shown to offer a larger design space and yield higher savings. Currently, the majority of the existing work aims at meeting a single accuracy. The extent of approximation tolerance, however, significantly varies with a change in input characteristics and applications. In this dissertation, methods and implementations are presented for cross-layer and automated design of accuracy-configurable Approximate Computing to maximally exploit the performance and energy benefits. In particular, this dissertation addresses the following challenges and introduces novel contributions: A main Approximate Computing category in hardware is to scale either voltage or frequency beyond the safe limits for power or performance benefits, respectively. The rationale is that timing errors would be gradual and for an initial range tolerable. This scaling enables a fine-grain accuracy-configurability by varying the timing error occurrence. However, conventional synthesis tools aim at meeting a single delay for all paths within the circuit. Subsequently, with voltage or frequency scaling, either all paths succeed, or a large number of paths fail simultaneously, with a steep increase in error rate and magnitude. This dissertation presents an automated method for minimizing path delays by individually constraining the primary outputs of combinational circuits. As a result, it reduces the number of failing paths and makes the timing errors significantly more gradual, and also rarer and smaller on average. Additionally, it reveals that delays can be significantly reduced towards the least significant bit (LSB) and allows operating at a higher frequency when small operands are computed. Precision scaling, i.e., reducing the representation of data and its accuracy is widely used in multiple abstraction layers in Approximate Computing. Reducing data precision also reduces the transistor toggles, and therefore the dynamic power consumption. Application and architecture level precision scaling results in using only LSBs of the circuit. Arithmetic circuits often have less complexity and logic depth in LSBs compared to most significant bits (MSB). To take advantage of this circuit property, a delay-altering synthesis methodology is proposed. The method finds energy-optimal delay values under configurable precision usage and assigns them to primary outputs used for different precisions. Thereby, it enables dynamic frequency-precision scalable circuits for energy efficiency. Within the hardware architecture, it is possible to instantiate multiple units with the same functionality with different fixed approximation levels, where each block benefits from having fewer transistors and also synthesis relaxations. These blocks can be selected dynamically and thus allow to configure the accuracy during runtime. Instantiating such approximate blocks can be a lower dynamic power but higher area and leakage cost alternative to the current state-of-the-art gating mechanisms which switch off a group of paths in the circuit to reduce the toggling activity. Jointly, instantiating multiple blocks and gating mechanisms produce a large design space of accuracy-configurable hardware, where energy-optimal solutions require a cross-layer search in architecture and circuit levels. To that end, an approximate hardware synthesis methodology is proposed with joint optimizations in architecture and circuit for dynamic accuracy scaling, and thereby it enables energy vs. area trade-offs

KAVUAKA: a low-power application-specific processor architecture for digital hearing aids

The power consumption of digital hearing aids is very restricted due to their small physical size and the available hardware resources for signal processing are limited. However, there is a demand for more processing performance to make future hearing aids more useful and smarter. Future hearing aids should be able to detect, localize, and recognize target speakers in complex acoustic environments to further improve the speech intelligibility of the individual hearing aid user. Computationally intensive algorithms are required for this task. To maintain acceptable battery life, the hearing aid processing architecture must be highly optimized for extremely low-power consumption and high processing performance.The integration of application-specific instruction-set processors (ASIPs) into hearing aids enables a wide range of architectural customizations to meet the stringent power consumption and performance requirements. In this thesis, the application-specific hearing aid processor KAVUAKA is presented, which is customized and optimized with state-of-the-art hearing aid algorithms such as speaker localization, noise reduction, beamforming algorithms, and speech recognition. Specialized and application-specific instructions are designed and added to the baseline instruction set architecture (ISA). Among the major contributions are a multiply-accumulate (MAC) unit for real- and complex-valued numbers, architectures for power reduction during register accesses, co-processors and a low-latency audio interface. With the proposed MAC architecture, the KAVUAKA processor requires 16 % less cycles for the computation of a 128-point fast Fourier transform (FFT) compared to related programmable digital signal processors. The power consumption during register file accesses is decreased by 6 %to 17 % with isolation and by-pass techniques. The hardware-induced audio latency is 34 %lower compared to related audio interfaces for frame size of 64 samples.The final hearing aid system-on-chip (SoC) with four KAVUAKA processor cores and ten co-processors is integrated as an application-specific integrated circuit (ASIC) using a 40 nm low-power technology. The die size is 3.6 mm2. Each of the processors and co-processors contains individual customizations and hardware features with a varying datapath width between 24-bit to 64-bit. The core area of the 64-bit processor configuration is 0.134 mm2. The processors are organized in two clusters that share memory, an audio interface, co-processors and serial interfaces. The average power consumption at a clock speed of 10 MHz is 2.4 mW for SoC and 0.6 mW for the 64-bit processor.Case studies with four reference hearing aid algorithms are used to present and evaluate the proposed hardware architectures and optimizations. The program code for each processor and co-processor is generated and optimized with evolutionary algorithms for operation merging,instruction scheduling and register allocation. The KAVUAKA processor architecture is com-pared to related processor architectures in terms of processing performance, average power consumption, and silicon area requirements

MOCAST 2021

The 10th International Conference on Modern Circuit and System Technologies on Electronics and Communications (MOCAST 2021) will take place in Thessaloniki, Greece, from July 5th to July 7th, 2021. The MOCAST technical program includes all aspects of circuit and system technologies, from modeling to design, verification, implementation, and application. This Special Issue presents extended versions of top-ranking papers in the conference. The topics of MOCAST include:Analog/RF and mixed signal circuits;Digital circuits and systems design;Nonlinear circuits and systems;Device and circuit modeling;High-performance embedded systems;Systems and applications;Sensors and systems;Machine learning and AI applications;Communication; Network systems;Power management;Imagers, MEMS, medical, and displays;Radiation front ends (nuclear and space application);Education in circuits, systems, and communications

Acquisition systems and decoding algorithms of peripheral neural signals for prosthetic applications

During the years, neuroprosthetic applications have obtained a great deal of attention by the international research, especially in the bioengineering field, thanks to the huge investments on several proposed projects funded by the political institutions which consider the treatment of this particular disease of fundamental importance for the global community. The aim of these projects is to find a possible solution to restore the functionalities lost by a patient subjected to an upper limb amputation trying to develop, according to physiological considerations, a communication link between the brain in which the significant signals are generated and a motor prosthesis device able to perform the desired action. Moreover, the designed system must be able to give back to the brain a sensory feedback about the surrounding world in terms of pressure or temperature acquired by tactile biosensors placed at the surface of the cybernetic hand. It in fact allows to execute involuntarymovements when for example the armcomes in contact with hot objects. The development of such a closed-loop architecture involves the need to address some critical issues which depend on the chosen approach. Several solutions have been proposed by the researches of the field, each one differing with respect to where the neural signals are acquired, either at the central nervous systemor at the peripheral one,most of themfollowing the former even that the latter is always considered by the amputees amore natural way to handle the artificial limb. This research work is based on the use of intrafascicular electrodes directly implanted in the residual peripheral nerves of the stump which represents a good compromise choice in terms of invasiveness and selectivity extracting electroneurographic (ENG) signals from which it is possible to identify the significant activity of a quite limited number of neuronal cells. In the perspective of the hardware implementation of the resulting solution which can work autonomously without any intervention by the amputee in an adaptive way according to the current characteristics of the processed signal and by using batteries as power source allowing portability, it is necessary to fulfill the tight constraints imposed by the application under consideration involved in each of the various phases which compose the considered closed-loop system. Regarding to the recording phase, the implementation must be able to remove the unwanted interferences mainly due to the electro-stimulations of themuscles placed near the electrodes featured by an order of magnitude much greater in comparison to that of the signals of interest amplifying the frequency components belonging to the significant bandwidth, and to convert them with a high resolution in order to obtain good performance at the next processing phases. To this aim, a recording module for peripheral neural signals will be presented, based on the use of a sigma-delta architecture which is composed by two main parts: an analog front-end stage for neural signal acquisition, pre-filtering and sigma-delta modulation and a digital unit for sigma-delta decimation and system configuration. Hardware/software cosimulations exploiting the Xilinx System Generator tool in Matlab Simulink environment and then transistor-level simulations confirmed that the system is capable of recording neural signals in the order of magnitude of tens of μV rejecting the huge low-frequency noise due to electromyographic interferences. The same architecture has been then exploited to implement a prototype of an 8-channel implantable electronic bi-directional interface between the peripheral nervous system and the neuro-controlled hand prosthesis. The solution includes a custom designed Integrated Circuit (0.35μm CMOS technology), responsible of the signal pre-filtering and sigma-delta modulation for each channel and the neural stimuli generation (in the opposite path) based on the directives sent by a digital control systemmapped on a low-cost Xilinx FPGA Spartan-3E 1600 development board which also involves the multi-channel sigma-delta decimation with a high-order band-pass filter as first stage in order to totally remove the unwanted interferences. In this way, the analog chip can be implanted near the electrodes thanks to its limited size avoiding to add a huge noise to theweak neural signals due to longwires connections and to cause heat-related infections, shifting the complexity to the digital part which can be hosted on a separated device in the stump of the amputeewithout using complex laboratory instrumentations. The system has been successfully tested from the electrical point of view and with in-vivo experiments exposing good results in terms of output resolution and noise rejection even in case of critical conditions. The various output channels at the Nyquist sampling frequency coming from the acquisition system must be processed in order to decode the intentions of movements of the amputee, applying the correspondent electro-mechanical stimulation in input to the cybernetic hand in order to perform the desired motor action. Different decoding approaches have been presented in the past, the majority of them were conceived starting from the relative implementation and performance evaluation of their off-line version. At the end of the research, it is necessary to develop these solutions on embedded systems performing an online processing of the peripheral neural signals. However, it is often possible only by using complex hardware platforms clocked at very high operating frequencies which are not be compliant with the low-power requirements needed to allow portability for the prosthetic device. At present, in fact, the important aspect of the real-time implementation of sophisticated signal processing algorithms on embedded systems has been often overlooked, notwithstanding the impact that limited resources of the former may have on the efficiency/effectiveness of any given algorithm. In this research work it has been addressed the optimization of a state-of-the-art algorithmfor PNS signals decoding that is a step forward for its real-time, full implementation onto a floating-point Digital Signal Processor (DSP). Beyond low-level optimizations, different solutions have been proposed at an high level in order to find the best trade-off in terms of effectiveness/efficiency. A latency model, obtained through cycle accurate profiling of the different code sections, has been drawn in order to perform a fair performance assessment. The proposed optimized real-time algorithmachieves up to 96% of correct classification on real PNS signals acquired through tf-LIFE electrodes on animals, and performs as the best off-line algorithmfor spike clustering on a synthetic cortical dataset characterized by a reasonable dissimilarity between the spikemorphologies of different neurons. When the real-time requirements are joined to the fulfilment of area and power minimization for implantable/portable applications, such as for the target neuroprosthetic devices, only custom VLSI implementations can be adopted. In this case, every part of the algorithmshould be carefully tuned. To this aim, the first preprocessing stage of the decoding algorithmbased on the use of aWavelet Denoising solution able to remove also the in-band noise sources has been deeply analysed in order to obtain an optimal hardware implementation. In particular, the usually overlooked part related to threshold estimation has been evaluated in terms of required hardware resources and functionality, exploiting the commercial Xilinx System Generator tool for the design of the architecture and the co-simulation. The analysis has revealed how the widely used Median Absolute Deviation (MAD) could lead o hardware implementations highly inefficient compared to other dispersion estimators demonstrating better scalability, relatively to the specific application. Finally, two different hardware implementations of the reference decoding algorithm have been presented highlighting pros and cons of each one of them. Firstly, a novel approach based on high-level dataflow description and automatic hardware generation is presented and evaluated on the on-line template-matching spike sorting algorithmwhich represents the most complex processing stage. It starts from the identification of the single kernels with the greater computational complexity and using their dataflow description to generate the HDL implementation of a coarse-grained reconfigurable global kernel characterized by theminimumresources in order to reduce the area and the energy dissipation for the fulfilment of the low-power requirements imposed by the application. Results in the best case have revealed a 71%of area saving compared tomore traditional solutions,without any accuracy penalty. With respect to single kernels execution, better latency performance are achievable stillminimizing the number of adopted resources. The performance in terms of latency can also be improved by tuning the implemented parallelismin the light of a defined number of channels and real-time constraints, by using more than one reconfigurable global kernel in order that they can be exploited to perform the same or different kernels at the same time in a parallel way, due to the fact that each one can execute the relative processing only in a sequential way. For this reason, a second FPGA-based prototype has been proposed based on the use of aMulti-Processor System-on-Chip (MPSoC) embedded architecture. This prototype is capable of respecting the real-time constraints posed by the application when clocked at less than 50 MHz, in comparison to 300 MHz of the previous DSP implementation. Considering that the application workload is extremely data dependent and unpredictable due to the sparsity of the neural signals, the architecture has to be dimensioned taking into account critical worst-case operating conditions in order to always ensure the correct functionality. To compensate the resulting overprovisioning of the system architecture, a software-controllable power management based on the use of clock gating techniques has been integrated in order tominimize the dynamic power consumption of the resulting solution. Summarizing, this research work can be considered a sort of proof-of-concept for the proposed techniques considering all the design issues which characterize each stage of the closed-loop system in the perspective of a portable low-power real-time hardware implementation of the neuro-controlled prosthetic device

Acquisition systems and decoding algorithms of peripheral neural signals for prosthetic applications

During the years, neuroprosthetic applications have obtained a great deal of attention by the international research, especially in the bioengineering field, thanks to the huge investments on several proposed projects funded by the political institutions which consider the treatment of this particular disease of fundamental importance for the global community. The aim of these projects is to find a possible solution to restore the functionalities lost by a patient subjected to an upper limb amputation trying to develop, according to physiological considerations, a communication link between the brain in which the significant signals are generated and a motor prosthesis device able to perform the desired action. Moreover, the designed system must be able to give back to the brain a sensory feedback about the surrounding world in terms of pressure or temperature acquired by tactile biosensors placed at the surface of the cybernetic hand. It in fact allows to execute involuntarymovements when for example the armcomes in contact with hot objects. The development of such a closed-loop architecture involves the need to address some critical issues which depend on the chosen approach. Several solutions have been proposed by the researches of the field, each one differing with respect to where the neural signals are acquired, either at the central nervous systemor at the peripheral one,most of themfollowing the former even that the latter is always considered by the amputees amore natural way to handle the artificial limb. This research work is based on the use of intrafascicular electrodes directly implanted in the residual peripheral nerves of the stump which represents a good compromise choice in terms of invasiveness and selectivity extracting electroneurographic (ENG) signals from which it is possible to identify the significant activity of a quite limited number of neuronal cells. In the perspective of the hardware implementation of the resulting solution which can work autonomously without any intervention by the amputee in an adaptive way according to the current characteristics of the processed signal and by using batteries as power source allowing portability, it is necessary to fulfill the tight constraints imposed by the application under consideration involved in each of the various phases which compose the considered closed-loop system. Regarding to the recording phase, the implementation must be able to remove the unwanted interferences mainly due to the electro-stimulations of themuscles placed near the electrodes featured by an order of magnitude much greater in comparison to that of the signals of interest amplifying the frequency components belonging to the significant bandwidth, and to convert them with a high resolution in order to obtain good performance at the next processing phases. To this aim, a recording module for peripheral neural signals will be presented, based on the use of a sigma-delta architecture which is composed by two main parts: an analog front-end stage for neural signal acquisition, pre-filtering and sigma-delta modulation and a digital unit for sigma-delta decimation and system configuration. Hardware/software cosimulations exploiting the Xilinx System Generator tool in Matlab Simulink environment and then transistor-level simulations confirmed that the system is capable of recording neural signals in the order of magnitude of tens of μV rejecting the huge low-frequency noise due to electromyographic interferences. The same architecture has been then exploited to implement a prototype of an 8-channel implantable electronic bi-directional interface between the peripheral nervous system and the neuro-controlled hand prosthesis. The solution includes a custom designed Integrated Circuit (0.35μm CMOS technology), responsible of the signal pre-filtering and sigma-delta modulation for each channel and the neural stimuli generation (in the opposite path) based on the directives sent by a digital control systemmapped on a low-cost Xilinx FPGA Spartan-3E 1600 development board which also involves the multi-channel sigma-delta decimation with a high-order band-pass filter as first stage in order to totally remove the unwanted interferences. In this way, the analog chip can be implanted near the electrodes thanks to its limited size avoiding to add a huge noise to theweak neural signals due to longwires connections and to cause heat-related infections, shifting the complexity to the digital part which can be hosted on a separated device in the stump of the amputeewithout using complex laboratory instrumentations. The system has been successfully tested from the electrical point of view and with in-vivo experiments exposing good results in terms of output resolution and noise rejection even in case of critical conditions. The various output channels at the Nyquist sampling frequency coming from the acquisition system must be processed in order to decode the intentions of movements of the amputee, applying the correspondent electro-mechanical stimulation in input to the cybernetic hand in order to perform the desired motor action. Different decoding approaches have been presented in the past, the majority of them were conceived starting from the relative implementation and performance evaluation of their off-line version. At the end of the research, it is necessary to develop these solutions on embedded systems performing an online processing of the peripheral neural signals. However, it is often possible only by using complex hardware platforms clocked at very high operating frequencies which are not be compliant with the low-power requirements needed to allow portability for the prosthetic device. At present, in fact, the important aspect of the real-time implementation of sophisticated signal processing algorithms on embedded systems has been often overlooked, notwithstanding the impact that limited resources of the former may have on the efficiency/effectiveness of any given algorithm. In this research work it has been addressed the optimization of a state-of-the-art algorithmfor PNS signals decoding that is a step forward for its real-time, full implementation onto a floating-point Digital Signal Processor (DSP). Beyond low-level optimizations, different solutions have been proposed at an high level in order to find the best trade-off in terms of effectiveness/efficiency. A latency model, obtained through cycle accurate profiling of the different code sections, has been drawn in order to perform a fair performance assessment. The proposed optimized real-time algorithmachieves up to 96% of correct classification on real PNS signals acquired through tf-LIFE electrodes on animals, and performs as the best off-line algorithmfor spike clustering on a synthetic cortical dataset characterized by a reasonable dissimilarity between the spikemorphologies of different neurons. When the real-time requirements are joined to the fulfilment of area and power minimization for implantable/portable applications, such as for the target neuroprosthetic devices, only custom VLSI implementations can be adopted. In this case, every part of the algorithmshould be carefully tuned. To this aim, the first preprocessing stage of the decoding algorithmbased on the use of aWavelet Denoising solution able to remove also the in-band noise sources has been deeply analysed in order to obtain an optimal hardware implementation. In particular, the usually overlooked part related to threshold estimation has been evaluated in terms of required hardware resources and functionality, exploiting the commercial Xilinx System Generator tool for the design of the architecture and the co-simulation. The analysis has revealed how the widely used Median Absolute Deviation (MAD) could lead o hardware implementations highly inefficient compared to other dispersion estimators demonstrating better scalability, relatively to the specific application. Finally, two different hardware implementations of the reference decoding algorithm have been presented highlighting pros and cons of each one of them. Firstly, a novel approach based on high-level dataflow description and automatic hardware generation is presented and evaluated on the on-line template-matching spike sorting algorithmwhich represents the most complex processing stage. It starts from the identification of the single kernels with the greater computational complexity and using their dataflow description to generate the HDL implementation of a coarse-grained reconfigurable global kernel characterized by theminimumresources in order to reduce the area and the energy dissipation for the fulfilment of the low-power requirements imposed by the application. Results in the best case have revealed a 71%of area saving compared tomore traditional solutions,without any accuracy penalty. With respect to single kernels execution, better latency performance are achievable stillminimizing the number of adopted resources. The performance in terms of latency can also be improved by tuning the implemented parallelismin the light of a defined number of channels and real-time constraints, by using more than one reconfigurable global kernel in order that they can be exploited to perform the same or different kernels at the same time in a parallel way, due to the fact that each one can execute the relative processing only in a sequential way. For this reason, a second FPGA-based prototype has been proposed based on the use of aMulti-Processor System-on-Chip (MPSoC) embedded architecture. This prototype is capable of respecting the real-time constraints posed by the application when clocked at less than 50 MHz, in comparison to 300 MHz of the previous DSP implementation. Considering that the application workload is extremely data dependent and unpredictable due to the sparsity of the neural signals, the architecture has to be dimensioned taking into account critical worst-case operating conditions in order to always ensure the correct functionality. To compensate the resulting overprovisioning of the system architecture, a software-controllable power management based on the use of clock gating techniques has been integrated in order tominimize the dynamic power consumption of the resulting solution. Summarizing, this research work can be considered a sort of proof-of-concept for the proposed techniques considering all the design issues which characterize each stage of the closed-loop system in the perspective of a portable low-power real-time hardware implementation of the neuro-controlled prosthetic device