Performance and power optimization in VLSI physical design

As VLSI technology enters the nanoscale regime, a great amount of efforts have been made to reduce interconnect delay. Among them, buffer insertion stands out as an effective technique for timing optimization. A dramatic rise in on-chip buffer density has been witnessed. For example, in two recent IBM ASIC designs, 25% gates are buffers. In this thesis, three buffer insertion algorithms are presented for the procedure of performance and power optimization. The second chapter focuses on improving circuit performance under inductance effect. The new algorithm works under the dynamic programming framework and runs in provably linear time for multiple buffer types due to two novel techniques: restrictive cost bucketing and efficient delay update. The experimental results demonstrate that our linear time algorithm consistently outperforms all known RLC buffering algorithms in terms of both solution quality and runtime. That is, the new algorithm uses fewer buffers, runs in shorter time and the buffered tree has better timing. The third chapter presents a method to guarantee a high fidelity signal transmission in global bus. It proposes a new redundant via insertion technique to reduce via variation and signal distortion in twisted differential line. In addition, a new buffer insertion technique is proposed to synchronize the transmitted signals, thus further improving the effectiveness of the twisted differential line. Experimental results demonstrate a 6GHz signal can be transmitted with high fidelity using the new approaches. In contrast, only a 100MHz signal can be reliably transmitted using a single-end bus with power/ground shielding. Compared to conventional twisted differential line structure, our new techniques can reduce the magnitude of noise by 45% as witnessed in our simulation. The fourth chapter proposes a buffer insertion and gate sizing algorithm for million plus gates. The algorithm takes a combinational circuit as input instead of individual nets and greatly reduces the buffer and gate cost of the entire circuit. The algorithm has two main features: 1) A circuit partition technique based on the criticality of the primary inputs, which provides the scalability for the algorithm, and 2) A linear programming formulation of non-linear delay versus cost tradeoff, which formulates the simultaneous buffer insertion and gate sizing into linear programming problem. Experimental results on ISCAS85 circuits show that even without the circuit partition technique, the new algorithm achieves 17X speedup compared with path based algorithm. In the meantime, the new algorithm saves 16.0% buffer cost, 4.9% gate cost, 5.8% total cost and results in less circuit delay

A Conflict-Resilient Lock-Free Calendar Queue for Scalable Share-Everything PDES Platforms

Emerging share-everything Parallel Discrete Event Simulation (PDES) platforms rely on worker threads fully sharing the workload of events to be processed. These platforms require efficient event pool data structures enabling high concurrency of extraction/insertion operations. Non-blocking event pool algorithms are raising as promising solutions for this problem. However, the classical non-blocking paradigm leads concurrent conflicting operations, acting on a same portion of the event pool data structure, to abort and then retry. In this article we present a conflict-resilient non-blocking calendar queue that enables conflicting dequeue operations, concurrently attempting to extract the minimum element, to survive, thus improving the level of scalability of accesses to the hot portion of the data structure---namely the bucket to which the current locality of the events to be processed is bound. We have integrated our solution within an open source share-everything PDES platform and report the results of an experimental analysis of the proposed concurrent data structure compared to some literature solutions

swTVM: Exploring the Automated Compilation for Deep Learning on Sunway Architecture

The flourish of deep learning frameworks and hardware platforms has been demanding an efficient compiler that can shield the diversity in both software and hardware in order to provide application portability. Among the exiting deep learning compilers, TVM is well known for its efficiency in code generation and optimization across diverse hardware devices. In the meanwhile, the Sunway many-core processor renders itself as a competitive candidate for its attractive computational power in both scientific and deep learning applications. This paper combines the trends in these two directions. Specifically, we propose swTVM that extends the original TVM to support ahead-of-time compilation for architecture requiring cross-compilation such as Sunway. In addition, we leverage the architecture features during the compilation such as core group for massive parallelism, DMA for high bandwidth memory transfer and local device memory for data locality, in order to generate efficient code for deep learning application on Sunway. The experimental results show the ability of swTVM to automatically generate code for various deep neural network models on Sunway. The performance of automatically generated code for AlexNet and VGG-19 by swTVM achieves 6.71x and 2.45x speedup on average than hand-optimized OpenACC implementations on convolution and fully connected layers respectively. This work is the first attempt from the compiler perspective to bridge the gap of deep learning and high performance architecture particularly with productivity and efficiency in mind. We would like to open source the implementation so that more people can embrace the power of deep learning compiler and Sunway many-core processor

Load sharing for optimistic parallel simulations on multicore machines

Parallel Discrete Event Simulation (PDES) is based on the partitioning of the simulation model into distinct Logical Processes (LPs), each one modeling a portion of the entire system, which are allowed to execute simulation events concurrently. This allows exploiting parallel computing architectures to speedup model execution, and to make very large models tractable. In this article we cope with the optimistic approach to PDES, where LPs are allowed to concurrently process their events in a speculative fashion, and rollback/ recovery techniques are used to guarantee state consistency in case of causality violations along the speculative execution path. Particularly, we present an innovative load sharing approach targeted at optimizing resource usage for fruitful simulation work when running an optimistic PDES environment on top of multi-processor/multi-core machines. Beyond providing the load sharing model, we also define a load sharing oriented architectural scheme, based on a symmetric multi-threaded organization of the simulation platform. Finally, we present a real implementation of the load sharing architecture within the open source ROme OpTimistic Simulator (ROOT-Sim) package. Experimental data for an assessment of both viability and effectiveness of our proposal are presented as well. Copyright is held by author/owner(s)

Supporting shared data structures on distributed memory architectures

Programming nonshared memory systems is more difficult than programming shared memory systems, since there is no support for shared data structures. Current programming languages for distributed memory architectures force the user to decompose all data structures into separate pieces, with each piece owned by one of the processors in the machine, and with all communication explicitly specified by low-level message-passing primitives. A new programming environment is presented for distributed memory architectures, providing a global name space and allowing direct access to remote parts of data values. The analysis and program transformations required to implement this environment are described, and the efficiency of the resulting code on the NCUBE/7 and IPSC/2 hypercubes are described

A load-sharing architecture for high performance optimistic simulations on multi-core machines

In Parallel Discrete Event Simulation (PDES), the simulation model is partitioned into a set of distinct Logical Processes (LPs) which are allowed to concurrently execute simulation events. In this work we present an innovative approach to load-sharing on multi-core/multiprocessor machines, targeted at the optimistic PDES paradigm, where LPs are speculatively allowed to process simulation events with no preventive verification of causal consistency, and actual consistency violations (if any) are recovered via rollback techniques. In our approach, each simulation kernel instance, in charge of hosting and executing a specific set of LPs, runs a set of worker threads, which can be dynamically activated/deactivated on the basis of a distributed algorithm. The latter relies in turn on an analytical model that provides indications on how to reassign processor/core usage across the kernels in order to handle the simulation workload as efficiently as possible. We also present a real implementation of our load-sharing architecture within the ROme OpTimistic Simulator (ROOT-Sim), namely an open-source C-based simulation platform implemented according to the PDES paradigm and the optimistic synchronization approach. Experimental results for an assessment of the validity of our proposal are presented as well

Mesh generation, sizing and convergence for onshore and offshore wind farm Atmospheric Boundary Layer flow simulation with actuator discs

A new mesh generation process for wind farm modeling is presented together with a mesh convergence and sizing analysis for wind farm flow simulations. The generated meshes are tailored to simulate Atmospheric Boundary Layer (ABL) flows on complex terrains modeling the wind turbines as actuator discs. The wind farm mesher is fully automatic and, given the topography and the turbine characteristics (location, diameter and hub height), it generates a hybrid mesh conformal with the actuator discs and refined upwind and downstream. Moreover, it presents smooth element size transitions across scales and avoids extending high-resolution areas to all the domain. We take advantage of our automatic and robust mesher to study the mesh convergence of our RANS solver with linear elements, obtaining quadratic mesh convergence for a quantity of interest in all the tested cases. In addition, we quantify the mesh resolution at the terrain surface and at the actuator discs required to achieve a given numerical error in simulations in onshore and offshore frameworks. Finally, we present the generated meshes and the simulation results for an offshore and an onshore wind farm. We analyze in detail one particular wind direction for both cases, and for the onshore wind farm we use our automatic framework to estimate the yearly production of energy and measuring the error against the actual produced one.This work has been partially funded by the EU H2020Energy oriented Center of Excellence (EoCoE) for computer applications, the New European Wind Atlas (NEWA) and the High Performance Computing for Energy (HPC4E) projects. We thank Iberdrola Renovables for their collaboration and for providing wind farm data to validate the developed techniques.Peer ReviewedPostprint (published version