A Comparison of Digital Modulation Methods for Small Satellite Data Links

The selection of a good modulation scheme for a satellite data link should involve careful consideration of several factors. Bit-error-rate (BER), initial cost, power consumption, circuit complexity, channel linearity, reliability, and bandwidth must be considered and weighed in the selection process. This paper examines and compares various modulation methods applicable to small satellite data links. The performance of frequency-shift keying (FSK), bi-phase-shift keying (BPSK), quadrature-phase-shift keying (QPSK), offset QPSK (OQPSK), minimum-shift keying (MSK), and on-off keying (OOK) are compared. The use of a non-linear transmitter amplifier is normally desirable because of its power efficiency. Because of this, a near constant envelope modulation scheme is desired. Power efficiency and bandwidth efficiency may also be important. In regards to these and other criteria, OQPSK has good characteristics and is recommended

A modified low roundoff digital oscillator design

The work of this thesis is to summarize and compares the existing digital oscillator design methods and combine them to form a modified structure for oscillator design. First of all, a combined structure of complex oscillator design is proposed. The structure combines the advantages of low hardware complexity and low roundoff errors. Then based on the suggested complex oscillator structure, some new digital oscillator structures with uniform frequency spacing are suggested. The new structures are also the modified structure of the existing oscillator. By adding power-of-two shift boxes into the modified structure, dynamic range of the output is enlarged and the quantization errors are greatly reduced. The modified oscillators can generate low frequency and low amplitude sinusoid waves with very small phase and amplitude deviation. In order to further reduce the quantization errors, error feedback circuits is applied into the circuit to further reduce the errors

Modulation Techniques for Biomedical Implanted Devices and Their Challenges

Implanted medical devices are very important electronic devices because of their usefulness in monitoring and diagnosis, safety and comfort for patients. Since 1950s, remarkable efforts have been undertaken for the development of bio-medical implanted and wireless telemetry bio-devices. Issues such as design of suitable modulation methods, use of power and monitoring devices, transfer energy from external to internal parts with high efficiency and high data rates and low power consumption all play an important role in the development of implantable devices. This paper provides a comprehensive survey on various modulation and demodulation techniques such as amplitude shift keying (ASK), frequency shift keying (FSK) and phase shift keying (PSK) of the existing wireless implanted devices. The details of specifications, including carrier frequency, CMOS size, data rate, power consumption and supply, chip area and application of the various modulation schemes of the implanted devices are investigated and summarized in the tables along with the corresponding key references. Current challenges and problems of the typical modulation applications of these technologies are illustrated with a brief suggestions and discussion for the progress of implanted device research in the future. It is observed that the prime requisites for the good quality of the implanted devices and their reliability are the energy transformation, data rate, CMOS size, power consumption and operation frequency. This review will hopefully lead to increasing efforts towards the development of low powered, high efficient, high data rate and reliable implanted devices

Photo-detectors integrated with resonant tunneling diodes

We report on photo-detectors consisting of an optical waveguide that incorporates a resonant tunneling diode (RTD). Operating at wavelengths around 1.55 μm in the optical communications C band we achieve maximum sensitivities of around 0.29 A/W which is dependent on the bias voltage. This is due to the nature of RTD nonlinear current-voltage characteristic that has a negative differential resistance (NDR) region. The resonant tunneling diode photo-detector (RTD-PD) can be operated in either non-oscillating or oscillating regimes depending on the bias voltage quiescent point. The oscillating regime is apparent when the RTD-PD is biased in the NDR region giving rise to electrical gain and microwave self-sustained oscillations Taking advantage of the RTD’s NDR distinctive characteristics, we demonstrate efficient detection of gigahertz (GHz) modulated optical carriers and optical control of a RTD GHz oscillator. RTD-PD based devices can have applications in generation and optical control of GHz low-phase noise oscillators, clock recovery systems, and fiber optic enabled radio frequency communication systems.info:eu-repo/semantics/publishedVersio

Photo-detectors integrated with resonant tunneling diodes

We report on photo-detectors consisting of an optical waveguide that incorporates a resonant tunneling diode (RTD). Operating at wavelengths around 1.55 m in the optical communications C band we achieve maximum sensitivities of around 0.29 A/W which is dependent on the bias voltage. This is due to the nature of RTD nonlinear current-voltage characteristic that has a negative differential resistance (NDR) region. The resonant tunneling diode photo-detector (RTD-PD) can be operated in either non-oscillating or oscillating regimes depending on the bias voltage quiescent point. The oscillating regime is apparent when the RTD-PD is biased in the NDR region giving rise to electrical gain and microwave self-sustained oscillations Taking advantage of the RTD's NDR distinctive characteristics, we demonstrate efficient detection of gigahertz (GHz) modulated optical carriers and optical control of a RTD GHz oscillator. RTD-PD based devices can have applications in generation and optical control of GHz low-phase noise oscillators, clock recovery systems, and fiber optic enabled radio frequency communication systems.FCT under the project WOWi [PTDC/EEA-TEL/100755/2008]; programme POCTI/FEDER [REEQ/1272/EEI/2005]; FCT Portugal [SFRH/BPD/84466/2012]info:eu-repo/semantics/publishedVersio

Microwave vs optical crosslink study

The intersatellite links (ISL's) at geostationary orbit is currently a missing link in commercial satellite services. Prior studies have found that potential application of ISL's to domestic, regional, and global satellites will provide more cost-effective services than the non-ISL's systems (i.e., multiple-hop systems). In addition, ISL's can improve and expand the existing satellite services in several aspects. For example, ISL's can conserve the scarce spectrum allocated for fixed satellite services (FSS) by avoiding multiple hopping of the relay stations. ISL's can also conserve prime orbit slot by effectively expanding the geostationary arc. As a result of the coverage extension by using ISL's more users will have direct access to the satellite network, thus providing reduced signal propagation delay and improved signal quality. Given the potential benefits of ISL's system, it is of interest to determine the appropriate implementations for some potential ISL architectures. Summary of the selected ISL network architecture as supplied by NASA are listed. The projected high data rate requirements (greater than 400 Mbps) suggest that high frequency RF or optical implementations are natural approaches. Both RF and optical systems have their own merits and weaknesses which make the choice between them dependent on the specific application. Due to its relatively mature technology base, the implementation risk associated with RF (at least 32 GHz) is lower than that of the optical ISL's. However, the relatively large antenna size required by RF ISL's payload may cause real-estate problems on the host spacecraft. In addition, because of the frequency sharing (for duplex multiple channels communications) within the limited bandwidth allocated, RF ISL's are more susceptible to inter-system and inter-channel interferences. On the other hand, optical ISL's can offer interference-free transmission and compact sized payload. However, the extremely narrow beam widths (on the order of 10 micro-rad) associated with optical ISL's impose very stringent pointing, acquisition, and tracking requirements on the system. Even if the RF and optical systems are considered separately, questions still remain as to selection of RF frequency, direct versus coherent optical detection, etc. in implementing an ISL for a particular network architecture. These and other issues are studied

Characteristics of multi-h coded modulation

Includes bibliographical references (leaves 74-75).Multi-h Coded Continuous-Phase Frequency Shift Keying (Multi-h CPFSK) has gained interest in recent years because it offers an additional degree of freedom in the coding of CPFSK. Similar to Trellis Coded Modulation (TCM), it does not use redundancy to achieve coding gain. Hence with properly chosen modulation indices, impact to spectral occupancy is kept to a minimum. While there has been less attention given of this method as compared with TCM, this method can also be used with data coding. In cases where data coding is to be implemented, simultaneous use of Multi-h coding can be implemented with very little increase in complexity. In this thesis, a thorough mathematical review of this technique is made. A multi-oscillator multih coded modulator is shown similar to one presented by Massey for MSK. A unique analytical tool called a multi-oscillator trellis is presented. This considers the phase transitions with respect to each of the signalling frequencies instead of the center frequency, f₀. The multi-oscillator trellis is used to determine the state machine that will switch a bank of oscillators. The purpose of the state machine is to maintain continuous phase at the multi-oscillator output while generating the proper signal frequencies according to the data and modulation index. The Maximum Likelihood Detection process at the receiver is shown as a partition of an uncoded CPFSK signal. Finally, an analysis is made to determine if a modulator with a non-linear frequencyvoltage characteristic is suitable in a coherent multi-h coded application. Much of the literature on this topic has been comparative to PSK. It is the intent of this work to use FSK and MSK as the baseline to determine how existing structures may be extended to realize the benefits of multi-h coding. The application of this coding to an 8 Mbps 23 GHz CPFSK point-to-point terrestrial communications system is also a topic of this thesis. It is in this context that the analysis is made

Advanced digital modulation: Communication techniques and monolithic GaAs technology

Communications theory and practice are merged with state-of-the-art technology in IC fabrication, especially monolithic GaAs technology, to examine the general feasibility of a number of advanced technology digital transmission systems. Satellite-channel models with (1) superior throughput, perhaps 2 Gbps; (2) attractive weight and cost; and (3) high RF power and spectrum efficiency are discussed. Transmission techniques possessing reasonably simple architectures capable of monolithic fabrication at high speeds were surveyed. This included a review of amplitude/phase shift keying (APSK) techniques and the continuous-phase-modulation (CPM) methods, of which MSK represents the simplest case