Phased Array Systems in Silicon

Phased array systems, a special case of MIMO systems, take advantage of spatial directivity and array gain to increase spectral efficiency. Implementing a phased array system at high frequency in a commercial silicon process technology presents several challenges. This article focuses on the architectural and circuit-level trade-offs involved in the design of the first silicon-based fully integrated phased array system operating at 24 GHz. The details of some of the important circuit building blocks are also discussed. The measured results demonstrate the feasibility of using integrated phased arrays for wireless communication and vehicular radar applications at 24 GHz

Customized Versus Noncustomized Sound Therapy for Treatment of Tinnitus: A Randomized Crossover Clinical Trial.

ObjectivesTo determine the effectiveness of a customized sound therapy and compare its effectiveness to that of masking with broadband noise.MethodsSubjects were randomized to receive either customized sound therapy or broadband noise for 2 hours per day for 3 months and then switched to the other treatment after a washout period. The outcome variables were tinnitus loudness (scored 0-10), Tinnitus Handicap Inventory (THI), Beck Anxiety Inventory (BAI), minimum masking levels (MML), and residual inhibition (RI).ResultsEighteen subjects completed the study. Mean age was 53 ± 11 years, and mean tinnitus duration was 118 ± 99 months. With customized sound therapy, mean loudness decreased from 6.4 ± 2.0 to 4.9 ± 1.9 ( P = .001), mean THI decreased from 42.8 ± 21.6 to 31.5 ± 20.3 ( P < .001), mean BAI decreased from 10.6 ± 10.9 to 8.3 ± 9.9 ( P = .01), and MML decreased from 22.3 ± 11.6 dB SL to 17.2 ± 10.6 dB SL ( P = .005). After 3 months of broadband noise therapy, only BAI and, to a lesser degree, MML decreased ( P = .003 and .04, respectively).ConclusionsCustomized sound therapy can decrease the loudness and THI scores of tinnitus patients, and the results may be superior to broadband noise

A Wideband Inductorless CMOS Front-End for Software Defined

The number of wireless communication links is witnessing tremendous growth and new standards are being introduced at high pace. These standards heavily rely on digital signal processing, making CMOS the first technology of choice. However, RF CMOS circuit development is costly and time consuming due to mask costs and design iterations. This pleads for a Software Defined Radio approach, in which one piece of flexible radio hardware is re-used for different applications and standards, downloadable and under software control. To the best of our knowledge, little work has been done in this field based on CMOS technology. Recently, a bipolar downconverter front-end has been proposed [1]. In CMOS, only wideband low-noise amplifiers have been proposed, and some CMOS tuner ICs for satellite reception (which have less stringent noise requirements because they are preceded by an outdoor low-noise converter). This paper presents a wideband RF downconverter frontend in 0.18 um CMOS (also published in [2]), designed in the context of a research project exploring the feasibility of software defined radio, using a combined Bluetooth/WLAN receiver as a vehicle. Usually, RF receivers are optimised for low power consumption. In contrast, we have taken the approach to optimise for flexibility. The paper discusses the main system and circuit design choices, and assesses the achievable performance via measurements on a front-end implemented in 0.18um CMOS. The flexible design achieves a 0.2-2.2 GHz -3 dB bandwidth, a gain of 25 dB with 6 dB noise figure and +1 dBm IIP3

Near-field direct antenna modulation

NFDAM systems provide a unique solution for transmitting highly secured direction-dependent data and hence preventing eavesdroppers from properly demodulating the signal. A 60-GHz proof-of-concept chip was designed and measured

A robust sequential hypothesis testing method for brake squeal localisation

This contribution deals with the in situ detection and localisation of brake squeal in an automobile. As brake squeal is emitted from regions known a priori, i.e., near the wheels, the localisation is treated as a hypothesis testing problem. Distributed microphone arrays, situated under the automobile, are used to capture the directional properties of the sound field generated by a squealing brake. The spatial characteristics of the sampled sound field is then used to formulate the hypothesis tests. However, in contrast to standard hypothesis testing approaches of this kind, the propagation environment is complex and time-varying. Coupled with inaccuracies in the knowledge of the sensor and source positions as well as sensor gain mismatches, modelling the sound field is difficult and standard approaches fail in this case. A previously proposed approach implicitly tried to account for such incomplete system knowledge and was based on ad hoc likelihood formulations. The current paper builds upon this approach and proposes a second approach, based on more solid theoretical foundations, that can systematically account for the model uncertainties. Results from tests in a real setting show that the proposed approach is more consistent than the prior state-of-the-art. In both approaches, the tasks of detection and localisation are decoupled for complexity reasons. The localisation (hypothesis testing) is subject to a prior detection of brake squeal and identification of the squeal frequencies. The approaches used for the detection and identification of squeal frequencies are also presented. The paper, further, briefly addresses some practical issues related to array design and placement. (C) 2019 Author(s)

A fully integrated 24-GHz phased-array transmitter in CMOS

This paper presents the first fully integrated 24-GHz phased-array transmitter designed using 0.18-/spl mu/m CMOS transistors. The four-element array includes four on-chip CMOS power amplifiers, with outputs matched to 50 /spl Omega/, that are each capable of generating up to 14.5 dBm of output power at 24 GHz. The heterodyne transmitter has a two-step quadrature up-conversion architecture with local oscillator (LO) frequencies of 4.8 and 19.2 GHz, which are generated by an on-chip frequency synthesizer. Four-bit LO path phase shifting is implemented in each element at 19.2 GHz, and the transmitter achieves a peak-to-null ratio of 23 dB with raw beam-steering resolution of 7/spl deg/ for radiation normal to the array. The transmitter can support data rates of 500 Mb/s on each channel (with BPSK modulation) and occupies 6.8 mm /spl times/ 2.1 mm of die area