Improving latency tolerance of multithreading through decoupling

The increasing hardware complexity of dynamically scheduled superscalar processors may compromise the scalability of this organization to make an efficient use of future increases in transistor budget. SMT processors, designed over a superscalar core, are therefore directly concerned by this problem. The article presents and evaluates a novel processor microarchitecture which combines two paradigms: simultaneous multithreading and access/execute decoupling. Since its decoupled units issue instructions in order, this architecture is significantly less complex, in terms of critical path delays, than a centralized out-of-order design, and it is more effective for future growth in issue-width and clock speed. We investigate how both techniques complement each other. Since decoupling features an excellent memory latency hiding efficiency, the large amount of parallelism exploited by multithreading may be used to hide the latency of functional units and keep them fully utilized. The study shows that, by adding decoupling to a multithreaded architecture, fewer threads are needed to achieve maximum throughput. Therefore, in addition to the obvious hardware complexity reduction, it places lower demands on the memory system. The study also reveals that multithreading by itself exhibits little memory latency tolerance. Results suggest that most of the latency hiding effectiveness of SMT architectures comes from the dynamic scheduling. On the other hand, decoupling is very effective at hiding memory latency. An increase in the cache miss penalty from 1 to 32 cycles reduces the performance of a 4-context multithreaded decoupled processor by less than 2 percent. For the nondecoupled multithreaded processor, the loss of performance is about 23 percent.Peer ReviewedPostprint (published version

Compiler analysis for trace-level speculative multithreaded architectures

Trace-level speculative multithreaded processors exploit trace-level speculation by means of two threads working cooperatively. One thread, called the speculative thread, executes instructions ahead of the other by speculating on the result of several traces. The other thread executes speculated traces and verifies the speculation made by the first thread. In this paper, we propose a static program analysis for identifying candidate traces to be speculated. This approach identifies large regions of code whose live-output values may be successfully predicted. We present several heuristics to determine the best opportunities for dynamic speculation, based on compiler analysis and program profiling information. Simulation results show that the proposed trace recognition techniques achieve on average a speed-up close to 38% for a collection of SPEC2000 benchmarks.Peer ReviewedPostprint (published version

Improving multithreading performance for clustered VLIW architectures.

Very Long Instruction Word (VLIW) processors are very popular in embedded and mobile computing domain. Use of VLIW processors range from Digital Signal Processors (DSPs) found in a plethora of communication and multimedia devices to Graphics Processing Units (GPUs) used in gaming and high performance computing devices. The advantage of VLIWs is their low complexity and low power design which enable high performance at a low cost. Scalability of VLIWs is limited by the scalability of register file ports. It is not viable to have a VLIW processor with a single large register file because of area and power consumption implications of the register file. Clustered VLIW solve the register file scalability issue by partitioning the register file into multiple clusters and a set of functional units that are attached to register file of that cluster. Using a clustered approach, higher issue width can be achieved while keeping the cost of register file within reasonable limits. Several commercial VLIW processors have been designed using the clustered VLIW model. VLIW processors can be used to run a larger set of applications. Many of these applications have a good Lnstruction Level Parallelism (ILP) which can be efficiently utilized. However, several applications, specially the ones that are control code dominated do not exibit good ILP and the processor is underutilized. Cache misses is another major source of resource underutiliztion. Multithreading is a popular technique to improve processor utilization. Interleaved MultiThreading (IMT) hides cache miss latencies by scheduling a different thread each cycle but cannot hide unused instructions slots. Simultaneous MultiThread (SMT) can also remove ILP under-utilization by issuing multiple threads to fill the empty instruction slots. However, SMT has a higher implementation cost than IMT. The thesis presents Cluster-level Simultaneous MultiThreading (CSMT) that supports a limited form of SMT where VLIW instructions from different threads are merged at a cluster-level granularity. This lowers the hardware implementation cost to a level comparable to the cheap IMT technique. The more complex SMT combines VLIW instructions at the individual operation-level granularity which is quite expensive especially in for a mobile solution. We refer to SMT at operation-level as OpSMT to reduce ambiguity. While previous studies restricted OpSMT on a VLIW to 2 threads, CSMT has a better scalability and upto 8 threads can be supported at a reasonable cost. The thesis proposes several other techniques to further improve CSMT performance. In particular, Cluster renaming remaps the clusters used by instructions of different threads to reduce resource conflicts. Cluster renaming is quite effective in reducing the issue-slots under-utilization and significantly improves CSMT performance.The thesis also proposes: a hybrid between IMT and CSMT which increases the number of supported threads, heterogeneous instruction merging where some instructions are combined using SMT and CSMT rest, and finally, split-issue, a technique that allows to launch partially an instruction making it easier to be combined with others

Compiler optimization to improve data locality for processor multithreading

Over the last decade processor speed has increased dramatically, whereas the speed of the memory subsystem improved at a modest rate. Due to the increase in the cache miss latency (in terms of the processor cycle), processors stall on cache misses for a significant portion of its execution time. Multithreaded processors has been proposed in the literature to reduce the processor stall time due to cache misses. Although multithreading improves processor utilization, it may also increase cache miss rates, because in a multithreaded processor multiple threads share the same cache, which effectively reduces the cache size available to each individual thread. Increased processor utilization and the increase in the cache miss rate demands higher memory bandwidth. A novel compiler optimization method has been presented in this paper that improves data locality for each of the threads and enhances data sharing among the threads. The method is based on loop transformation theory and optimizes both spatial and temporal data locality. The created threads exhibit high level of intra-thread and inter-thread data locality which effectively reduces both the data cache miss rates and the total execution time of numerically intensive computation running on a multithreaded processor

Evaluating the Scalability of SDF Single-chip Multiprocessor Architecture Using Automatically Parallelizing Code

Advances in integrated circuit technology continue to provide more and more transistors on a chip. Computer architects are faced with the challenge of finding the best way to translate these resources into high performance. The challenge in the design of next generation CPU (central processing unit) lies not on trying to use up the silicon area, but on finding smart ways to make use of the wealth of transistors now available. In addition, the next generation architecture should offer high throughout performance, scalability, modularity, and low energy consumption, instead of an architecture that is suitable for only one class of applications or users, or only emphasize faster clock rate. A program exhibits different types of parallelism: instruction level parallelism (ILP), thread level parallelism (TLP), or data level parallelism (DLP). Likewise, architectures can be designed to exploit one or more of these types of parallelism. It is generally not possible to design architectures that can take advantage of all three types of parallelism without using very complex hardware structures and complex compiler optimizations. We present the state-of-art architecture SDF (scheduled data flowed) which explores the TLP parallelism as much as that is supplied by that application. We implement a SDF single-chip multiprocessor constructed from simpler processors and execute the automatically parallelizing application on the single-chip multiprocessor. SDF has many desirable features such as high throughput, scalability, and low power consumption, which meet the requirements of the next generation of CPU design. Compared with superscalar, VLIW (very long instruction word), and SMT (simultaneous multithreading), the experiment results show that for application with very little parallelism SDF is comparable to other architectures, for applications with large amounts of parallelism SDF outperforms other architectures

Introducing runahead threads

Simultaneous Multithreading processors share their resources among multiple threads in order to improve performance. However, a resource control policy is needed to avoid resource conflicts and prevent some threads from monopolizing them. On the contrary, resource conflicts would cause other threads to suffer from resource starvation degrading the overall performance. This situation is especially sensitive for memory bounded threads, because they hold an important amount of resources while long latency accesses are being served. Several fetch policies and resource control techniques have been proposed to overcome these problems by limiting the per-thread resource utilization. Nevertheless, this limitation is harmful for memory bounded threads because it restricts the memory level parallelism available that hides the long latency memory accesses. In this paper, we propose Runahead threads on SMT scenarios as a valuable solution for both exploiting the memory-level parallelism and reducing the resource contention. This approach switches a memory-bounded eager resource thread to a speculative light thread, avoiding critical resource blocking among multiple threads. Furthermore, it improves the thread-level parallelism by removing long-latency memory operations from the instruction window, releasing busy resources. We compare an SMT architecture using Runahead threads (SMTRA) to both state-of-the-art static fetch and dynamic resource control policies. Our results show that the SMTRA combination performs better, in terms of throughput and fairness, than any of the other policies.Postprint (published version

Vector coprocessor sharing techniques for multicores: performance and energy gains

Vector Processors (VPs) created the breakthroughs needed for the emergence of computational science many years ago. All commercial computing architectures on the market today contain some form of vector or SIMD processing. Many high-performance and embedded applications, often dealing with streams of data, cannot efficiently utilize dedicated vector processors for various reasons: limited percentage of sustained vector code due to substantial flow control; inherent small parallelism or the frequent involvement of operating system tasks; varying vector length across applications or within a single application; data dependencies within short sequences of instructions, a problem further exacerbated without loop unrolling or other compiler optimization techniques. Additionally, existing rigid SIMD architectures cannot tolerate efficiently dynamic application environments with many cores that may require the runtime adjustment of assigned vector resources in order to operate at desired energy/performance levels. To simultaneously alleviate these drawbacks of rigid lane-based VP architectures, while also releasing on-chip real estate for other important design choices, the first part of this research proposes three architectural contexts for the implementation of a shared vector coprocessor in multicore processors. Sharing an expensive resource among multiple cores increases the efficiency of the functional units and the overall system throughput. The second part of the dissertation regards the evaluation and characterization of the three proposed shared vector architectures from the performance and power perspectives on an FPGA (Field-Programmable Gate Array) prototype. The third part of this work introduces performance and power estimation models based on observations deduced from the experimental results. The results show the opportunity to adaptively adjust the number of vector lanes assigned to individual cores or processing threads in order to minimize various energy-performance metrics on modern vector- capable multicore processors that run applications with dynamic workloads. Therefore, the fourth part of this research focuses on the development of a fine-to-coarse grain power management technique and a relevant adaptive hardware/software infrastructure which dynamically adjusts the assigned VP resources (number of vector lanes) in order to minimize the energy consumption for applications with dynamic workloads. In order to remove the inherent limitations imposed by FPGA technologies, the fifth part of this work consists of implementing an ASIC (Application Specific Integrated Circuit) version of the shared VP towards precise performance-energy studies involving high- performance vector processing in multicore environments