Band-pass filtering of the time sequences of spectral parameters for robust wireless speech recognition

In this paper we address the problem of automatic speech recognition when wireless speech communication systems are involved. In this context, three main sources of distortion should be considered: acoustic environment, speech coding and transmission errors. Whilst the first one has already received a lot of attention, the last two deserve further investigation in our opinion. We have found out that band-pass filtering of the recognition features improves ASR performance when distortions due to these particular communication systems are present. Furthermore, we have evaluated two alternative configurations at different bit error rates (BER) typical of these channels: band-pass filtering the LP-MFCC parameters or a modification of the RASTA-PLP using a sharper low-pass section perform consistently better than LP-MFCC and RASTA-PLP, respectively.Publicad

Studies on noise robust automatic speech recognition

Noise in everyday acoustic environments such as cars, traffic environments, and cafeterias remains one of the main challenges in automatic speech recognition (ASR). As a research theme, it has received wide attention in conferences and scientific journals focused on speech technology. This article collection reviews both the classic and novel approaches suggested for noise robust ASR. The articles are literature reviews written for the spring 2009 seminar course on noise robust automatic speech recognition (course code T-61.6060) held at TKK

Using a low-bit rate speech enhancement variable post-filter as a speech recognition system pre-filter to improve robustness to GSM speech

Includes bibliographical references.Performance of speech recognition systems degrades when they are used to recognize speech that has been transmitted through GS1 (Global System for Mobile Communications) voice communication channels (GSM speech). This degradation is mainly due to GSM speech coding and GSM channel noise on speech signals transmitted through the network. This poor recognition of GSM channel speech limits the use of speech recognition applications over GSM networks. If speech recognition technology is to be used unlimitedly over GSM networks recognition accuracy of GSM channel speech has to be improved. Different channel normalization techniques have been developed in an attempt to improve recognition accuracy of voice channel modified speech in general (not specifically for GSM channel speech). These techniques can be classified into three broad categories, namely, model modification, signal pre-processing and feature processing techniques. In this work, as a contribution toward improving the robustness of speech recognition systems to GSM speech, the use of a low-bit speech enhancement post-filter as a speech recognition system pre-filter is proposed. This filter is to be used in recognition systems in combination with channel normalization techniques

A robust feature extraction for automatic speech recognition in noisy environments

This paper presents a method for extraction of speech robust features when the external noise is additive and has white noise characteristics. The process consists of a short time power normalisation which goal is to preserve as much as possible, the speech features against noise. The proposed normalisation will be optimal if the corrupted process has, as the noise process white noise characteristics. With optimal normalisation we can mean that the corrupting noise does not change at all the means of the observed vectors of the corrupted process. As most of the speech energy is contained in a relatively small frequency band being most of the band composed by noise or noise-like power, this normalisation process can still capture most of the noise distortions. For Signal to Noise Ratio greater than 5 dB the results show that for stationary white noise, the normalisation process where the noise characteristics are ignored at the test phase, outperforms the conventional Markov models composition where the noise is known. If the noise is known, a reasonable approximation of the inverted system can be easily obtained performing noise compensation still increasing the recogniser performance

Segment phoneme classification from speech under noisy conditions: Using amplitude-frequency modulation based two-dimensional auto-regressive features with deep neural networks

This thesis investigates at the acoustic-phonetic level the noise robustness of features derived using the AM-FM analysis of speech signals. The analysis on the noise robustness of these features is done using various neural network models and is based on the segment classification of phonemes. This analysis is also extended and the robustness of the AM-FM based features is compared under similar noise conditions with the traditional features such as the Mel-frequency cepstral coefficients(MFCC). We begin with an important aspect of segment phoneme classification experiments which is the study of architectural and training strategies of the various neural network models used. The results of these experiments showed that there is a difference in the training pattern adopted by the various neural network models. Before over-fitting, models that undergo pre-training are seen to train for many epochs more than their opposite models that do not undergo pre-training. Taking this difference in training pattern into perspective and based on phoneme classification rate the Gaussian restricted Boltzmann machine and the single layer perceptron are selected as the best performing model of the two groups, respectively. Using the two best performing models for classification, segment phoneme classification experiments under different noise conditions are performed for both the AM-FM based and traditional features. The experiments showed that AM-FM based frequency domain linear prediction features with or without feature compensation are more robust in the classification of 61 phonemes under white noise and 0 $dB$ signal-to-noise ratio(SNR) conditions compared to the traditional features. However, when the phonemes are folded to 39 phonemes, the results are ambiguous under all noise conditions and there is no unanimous conclusion as to which feature is most robust

Wavelet-based techniques for speech recognition

In this thesis, new wavelet-based techniques have been developed for the extraction of features from speech signals for the purpose of automatic speech recognition (ASR). One of the advantages of the wavelet transform over the short time Fourier transform (STFT) is its capability to process non-stationary signals. Since speech signals are not strictly stationary the wavelet transform is a better choice for time-frequency transformation of these signals. In addition it has compactly supported basis functions, thereby reducing the amount of computation as opposed to STFT where an overlapping window is needed. [Continues.

Models and Analysis of Vocal Emissions for Biomedical Applications

The International Workshop on Models and Analysis of Vocal Emissions for Biomedical Applications (MAVEBA) came into being in 1999 from the particularly felt need of sharing know-how, objectives and results between areas that until then seemed quite distinct such as bioengineering, medicine and singing. MAVEBA deals with all aspects concerning the study of the human voice with applications ranging from the neonate to the adult and elderly. Over the years the initial issues have grown and spread also in other aspects of research such as occupational voice disorders, neurology, rehabilitation, image and video analysis. MAVEBA takes place every two years always in Firenze, Italy