15,414 research outputs found
Grant-free Radio Access IoT Networks: Scalability Analysis in Coexistence Scenarios
IoT networks with grant-free radio access, like SigFox and LoRa, offer
low-cost durable communications over unlicensed band. These networks are
becoming more and more popular due to the ever-increasing need for ultra
durable, in terms of battery lifetime, IoT networks. Most studies evaluate the
system performance assuming single radio access technology deployment. In this
paper, we study the impact of coexisting competing radio access technologies on
the system performance. Considering \mathpzc K technologies, defined by time
and frequency activity factors, bandwidth, and power, which share a set of
radio resources, we derive closed-form expressions for the successful
transmission probability, expected battery lifetime, and experienced delay as a
function of distance to the serving access point. Our analytical model, which
is validated by simulation results, provides a tool to evaluate the coexistence
scenarios and analyze how introduction of a new coexisting technology may
degrade the system performance in terms of success probability and battery
lifetime. We further investigate solutions in which this destructive effect
could be compensated, e.g., by densifying the network to a certain extent and
utilizing joint reception
Survey on wireless technology trade-offs for the industrial internet of things
Aside from vast deployment cost reduction, Industrial Wireless Sensor and Actuator Networks (IWSAN) introduce a new level of industrial connectivity. Wireless connection of sensors and actuators in industrial environments not only enables wireless monitoring and actuation, it also enables coordination of production stages, connecting mobile robots and autonomous transport vehicles, as well as localization and tracking of assets. All these opportunities already inspired the development of many wireless technologies in an effort to fully enable Industry 4.0. However, different technologies significantly differ in performance and capabilities, none being capable of supporting all industrial use cases. When designing a network solution, one must be aware of the capabilities and the trade-offs that prospective technologies have. This paper evaluates the technologies potentially suitable for IWSAN solutions covering an entire industrial site with limited infrastructure cost and discusses their trade-offs in an effort to provide information for choosing the most suitable technology for the use case of interest. The comparative discussion presented in this paper aims to enable engineers to choose the most suitable wireless technology for their specific IWSAN deployment
An Energy Aware and Secure MAC Protocol for Tackling Denial of Sleep Attacks in Wireless Sensor Networks
Wireless sensor networks which form part of the core for the Internet of Things consist of resource constrained sensors that are usually powered by batteries. Therefore, careful
energy awareness is essential when working with these devices.
Indeed,the introduction of security techniques such as authentication and encryption, to ensure confidentiality and integrity of data, can place higher energy load on the sensors. However, the absence of security protection c ould give room for energy drain attacks such as denial of sleep attacks which have a higher negative impact on the life span ( of the sensors than the presence of security features.
This thesis, therefore, focuses on tackling denial of sleep attacks from two perspectives A security perspective and an energy efficiency perspective. The security perspective involves evaluating and ranking a number of security based techniques to curbing denial of sleep attacks. The energy efficiency perspective, on the other hand, involves exploring duty cycling and simulating three Media Access Control ( protocols Sensor MAC, Timeout MAC andTunableMAC under different network sizes and measuring different parameters such as the Received Signal Strength RSSI) and Link Quality Indicator ( Transmit power, throughput and energy efficiency Duty cycling happens to be one of the major techniques for conserving energy in wireless sensor networks and this research aims to answer questions with regards to the effect of duty cycles on the energy efficiency as well as the throughput of three duty cycle protocols Sensor MAC ( Timeout MAC ( and TunableMAC in addition to creating a novel MAC protocol that is also more resilient to denial of sleep a ttacks than existing protocols.
The main contributions to knowledge from this thesis are the developed framework used for evaluation of existing denial of sleep attack solutions and the algorithms which fuel the other contribution to knowledge a newly developed protocol tested on the Castalia Simulator on the OMNET++ platform. The new protocol has been compared with existing protocols and
has been found to have significant improvement in energy efficiency and also better resilience to denial of sleep at tacks Part of this research has been published Two conference
publications in IEEE Explore and one workshop paper
Evolving SDN for Low-Power IoT Networks
Software Defined Networking (SDN) offers a flexible and scalable architecture
that abstracts decision making away from individual devices and provides a
programmable network platform. However, implementing a centralized SDN
architecture within the constraints of a low-power wireless network faces
considerable challenges. Not only is controller traffic subject to jitter due
to unreliable links and network contention, but the overhead generated by SDN
can severely affect the performance of other traffic. This paper addresses the
challenge of bringing high-overhead SDN architecture to IEEE 802.15.4 networks.
We explore how traditional SDN needs to evolve in order to overcome the
constraints of low-power wireless networks, and discuss protocol and
architectural optimizations necessary to reduce SDN control overhead - the main
barrier to successful implementation. We argue that interoperability with the
existing protocol stack is necessary to provide a platform for controller
discovery and coexistence with legacy networks. We consequently introduce
{\mu}SDN, a lightweight SDN framework for Contiki, with both IPv6 and
underlying routing protocol interoperability, as well as optimizing a number of
elements within the SDN architecture to reduce control overhead to practical
levels. We evaluate {\mu}SDN in terms of latency, energy, and packet delivery.
Through this evaluation we show how the cost of SDN control overhead (both
bootstrapping and management) can be reduced to a point where comparable
performance and scalability is achieved against an IEEE 802.15.4-2012 RPL-based
network. Additionally, we demonstrate {\mu}SDN through simulation: providing a
use-case where the SDN configurability can be used to provide Quality of
Service (QoS) for critical network flows experiencing interference, and we
achieve considerable reductions in delay and jitter in comparison to a scenario
without SDN
TCP in the Internet of Things: from ostracism to prominence
© 2018 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.TCP has traditionally been neglected as a transport-layer protocol for the Internet of Things (IoT). However, recent trends and industry needs are favoring TCP presence in IoT environments. In this article, we describe the main IoT scenarios where TCP will be used. We then analyze the historically claimed issues of TCP in the IoT context. We argue that, in contrast to generally accepted wisdom, most of those possible issues fall in one of the following categories: i) are also found in well-accepted IoT end-to-end reliability mechanisms, ii) can be solved, or iii) are not actual issues. Considering the future prominent role of TCP in the IoT, we provide recommendations for lightweight TCP implementation and suitable operation in such scenarios, based on our IETF standardization work on the topic.Postprint (author's final draft
- …